Top On Sale Product Recommendations! Xiaomi Electric Screwdriver Set Precision MI Hand Tools Screw Driver Kit Precision Screwdriver Bit Set Multi-function Kits Tools Price Now: USD 32.33 (Original price: USD 39.43, 18% off) 🔗Click & Buy: s.click.aliexpress.com/e/_oDwwT9T
Dude. You crack me up. HAHAHA. Good stuff as usual. Suggestion/question. For the posts on the guns, why not use a small piece of sandpaper? Wrap it around the post and twist. Should give a more even job than using a blade like that. I notice you ALWAYS put CA glue in the screw holes before you REassemble the parts. Do you apply it to the sides of the hole or the bottom of the hole? Is it meant to bond the teeth of the screw or the bottom?
Thanks, man. The work can be sandpaper. Whatever method you use, if the results are the same it doesn't matter However, I am impatient and much more familiar with scratching with a knife. It doesn't matter if the adhesive is on the bottom or on the side as long as the screw can be fixed so that it doesn't move. A lock tight screw fixture may be used, not an instantaneous adhesive. This, too, is just using instant glue to overcome my urgent personality and annoyance. Such a joint structure is fixed because the more the deformation is repeated and the rotational motion is repeated, the more the screw is loosened.
The one I use is a local brand, but it will be the same as loctite 401. I recommend silicon grease. It doesn't react with rubber and plastic. www.amazon.com/s?k=Silicone+Grease&ref=nb_sb_noss_2 Thanks
@@arcanetoy While transforming mine there is either a scratch or grey paint rub on his chest (red) do you know if the chest is red paint or molded red plastic and if the mark can be removed ?
The people around me have the same scratches. Perhaps it is scratched by the process of rotating the wing, but I'm not sure how to recover it simply. I'm sorry I couldn't help you.
That's right. Silicone shock oil is also a good way. I also have silicone shock oil and often use it. However, once silicone oil is spilled, it is difficult to control how far it flows. In the case of a rotating joint that is screwed like this product, the screw may be released later. It is to use grease with high viscosity for easy control. I use colored products to make it easier to wipe off the lubricants that are stained more than necessary. Silicon oil is mainly used in parts that are bonded with pins and are difficult to decompose. thanks
Top On Sale Product Recommendations!
Xiaomi Electric Screwdriver Set Precision MI Hand Tools Screw Driver Kit Precision Screwdriver Bit Set Multi-function Kits Tools
Price Now: USD 32.33 (Original price: USD 39.43, 18% off)
🔗Click & Buy: s.click.aliexpress.com/e/_oDwwT9T
Starscream the F-15 eagle fighter jet has come in for maintenance. Shall we check on Starscream, the air commander of the Seekers?
이야 전문가의 손길이 느껴집니다... 스고이...!
이 정도면 완전 공장 초기화 수준이네요 ㅋㅋ 스타스크림의 재탄생입니다. 쓰시는 연장도 그렇고 전문가의 포스가 넘치네요
감사합니다.
Brother, you are amazing! I love these videos!
Hahahaha, i like the ending part. Good tutorial just a bit too much works for me, i guess i just transform it back to robot mode & stay as it is.
Found my new favorite type of videos.
Love this vid, came from JobbytheHong!
댓글 잘 안다는데 너무 좋은 영상들 감사합니다 대박나실겁니다
우리 모드 모와~모와~서 절루 보냈시다 ㅋㅋ 윤활유 공구 받으세요 ㅋㅋ
오~~한국분이 이런 영상을 이런거 좋네요 ㅎㅎ
Dude. You crack me up. HAHAHA.
Good stuff as usual. Suggestion/question. For the posts on the guns, why not use a small piece of sandpaper? Wrap it around the post and twist. Should give a more even job than using a blade like that.
I notice you ALWAYS put CA glue in the screw holes before you REassemble the parts. Do you apply it to the sides of the hole or the bottom of the hole? Is it meant to bond the teeth of the screw or the bottom?
Thanks, man.
The work can be sandpaper.
Whatever method you use, if the results are the same it doesn't matter
However, I am impatient and much more familiar with scratching with a knife.
It doesn't matter if the adhesive is on the bottom or on the side as long as the screw can be fixed so that it doesn't move.
A lock tight screw fixture may be used, not an instantaneous adhesive.
This, too, is just using instant glue to overcome my urgent personality and annoyance.
Such a joint structure is fixed because the more the deformation is repeated and the rotational motion is repeated, the more the screw is loosened.
No entendí nada pero me gusto el final jajajajajaja
Could someone put a purchase link for that lubricant that the boy uses in the video? I'd be really grateful
it's silicon grease.
It doesn't react with rubber and plastic.
www.amazon.com/s?k=Silicone+Grease&ref=nb_sb_noss_2
Thanks
What type of lubricant and glue did he use here?
The one I use is a local brand, but it will be the same as loctite 401.
I recommend silicon grease.
It doesn't react with rubber and plastic.
www.amazon.com/s?k=Silicone+Grease&ref=nb_sb_noss_2
Thanks
What about a drop of cooking oil to lubricate?
I can't guarantee the reactivity with plastic.
It can be lumped into chunks or scattered and smelly.
Please use lubricants if possible.
Thank you.
Hi! What kind of greese is that?
it's silicon grease.
It doesn't react with rubber and plastic.
www.amazon.com/s?k=Silicone+Grease&ref=nb_sb_noss_2
Thanks
Wish this was in English it's great infk
There are subtitles.
Please turn on the RUclips caption.
I'm a little inexperienced because it's Google translation.
thanks
@@arcanetoy While transforming mine there is either a scratch or grey paint rub on his chest (red) do you know if the chest is red paint or molded red plastic and if the mark can be removed ?
The people around me have the same scratches.
Perhaps it is scratched by the process of rotating the wing, but I'm not sure how to recover it simply.
I'm sorry I couldn't help you.
Use silicone shock oil. No color, and plastic safe, liquid.
That's right.
Silicone shock oil is also a good way.
I also have silicone shock oil and often use it.
However, once silicone oil is spilled, it is difficult to control how far it flows.
In the case of a rotating joint that is screwed like this product, the screw may be released later.
It is to use grease with high viscosity for easy control.
I use colored products to make it easier to wipe off the lubricants that are stained more than necessary.
Silicon oil is mainly used in parts that are bonded with pins and are difficult to decompose.
thanks
@@arcanetoy Yah i use a toothpick but you do have to becareful, thank you for the video! :)
No thanks.