Turning machine Offset page explanation in Siemens CNC CONTROLLER-settings option details in SINUMER

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 55

  • @rambachanmaurya7278
    @rambachanmaurya7278 4 года назад +1

    Aapka pura video mein Sher karta hun like thank you so much aur aapke jaisa koi video upload nahin karta aap ke video dekhne mein bahut help milta Hai
    Sir

  • @sanjaythomas9474
    @sanjaythomas9474 4 года назад +1

    Video very nice and the description also very useful

  • @m.j.abilash608
    @m.j.abilash608 4 года назад

    Thank you sir.My doubt was clear and make videos on daily basis.we are eager to learn some
    New thinks.

  • @nandanraj1920
    @nandanraj1920 2 года назад +1

    Stock removal in turning me Radius ka canned cycle kaise bnye sir…Siemens m
    Plz sir

  • @rambachanmaurya7278
    @rambachanmaurya7278 4 года назад +1

    Great sir ji

  • @vishalpal9406
    @vishalpal9406 4 года назад

    Yes sir please upload video in increase wear limit

  • @vasimansari1919
    @vasimansari1919 4 года назад

    Very good sir

  • @vasimansari1919
    @vasimansari1919 4 года назад +1

    Fanuc simence me block Skip kaise karte hai sir plz video banaaae

  • @vrraipurchhattisgarh951
    @vrraipurchhattisgarh951 Год назад

    🙏 Gurudev

  • @ammaskp5063
    @ammaskp5063 4 года назад

    Good evening sir. Offset page over allso explanation very nice.( ST_page I'm looking forward to that lesson) and this is allso( magazine_page " D" tool block very nice ) I have waiting to this lesson work offset_page 54.....57...and( Base _ Page work shift nice method ) 🙏🙏🙏🙏🙏🙏🌺🌺🌼🌻👍

  • @RahulInamdar-m6h
    @RahulInamdar-m6h 4 месяца назад

    Sir I'm Rahul Inamdar In Pune, Meri Ek Request Micro Program Mai Koi Videos Bana sakte Ho Kya.....???

  • @kumarom3520
    @kumarom3520 4 года назад

    Deep groove mei tool direction is very important so pls explain your video only turning

  • @m.j.abilash608
    @m.j.abilash608 4 года назад

    my kind request sir.please explain about contour turning for different tools for roughing and finishing.

  • @amoltaware8399
    @amoltaware8399 4 года назад +1

    please sir make video on Tool nose compensation

  • @dhandhalsharwan2932
    @dhandhalsharwan2932 2 года назад

    CNC. Pr square thread kese banate h sir.. video banao ✌️✌️✌️✌️

  • @vishalsingh-vh7kp
    @vishalsingh-vh7kp 4 года назад +1

    Sir ek video turning ke sub program aur stock removal cycle pe banao please sir

    • @CNC_Guru_Tech_Center
      @CNC_Guru_Tech_Center  4 года назад

      ruclips.net/video/HJt5eyJJi-U/видео.html
      Please see this video and if u feel any queries comment me.

  • @bhushankanade3873
    @bhushankanade3873 3 года назад

    I'd grooving left or right tool selection and cycle selection batay sir

  • @stcmech2076
    @stcmech2076 3 года назад

    Sir R perameter ke bare me kuchh batae sir.

  • @joginderkumar1013
    @joginderkumar1013 4 года назад

    Cnc machine me ek rodd me se char bush karne hai to unka offset kese dete hai g54 g55 g56 g57. Full detail

  • @technicsk8502
    @technicsk8502 3 года назад

    Tool wear ke baareme detail video banaaiye sir

  • @mdzvlogssm2529
    @mdzvlogssm2529 Год назад

    Cutting direction ko explain karye sir please

  • @DilshadAhmad-kz2xw
    @DilshadAhmad-kz2xw 3 года назад

    How to use G41 and G42 in turning and how we use tool type 1-8 like fanuc controller

  • @stcmech2076
    @stcmech2076 3 года назад

    Sir part count ka program kaise kare vo batae sir.

  • @sivae568
    @sivae568 3 месяца назад

    Hi sir offset page loc number not order in page how solve this problem

  • @cncmacrosteps2756
    @cncmacrosteps2756 4 года назад

    Dear sir , i Have One Doubt ,CNC Siemens Control for G54 to G59 for that parameter Number Sir I am just one Example for Fanuc Control :
    G54 in a XYZ Axis Parameter Code for @,@,@.
    so;
    Siemens Control:
    G54 in a XYZ Axis Parameter Code ? Sir.
    Thank You.

  • @SanjanaKumari-dr2bh
    @SanjanaKumari-dr2bh Год назад

    Sir Sp1 and sp3 ke bare me describe kijiye n please

  • @vishalsingh-vh7kp
    @vishalsingh-vh7kp 4 года назад

    Sirji macro programing pe ek video banao bahot din se request kar raha hu
    Please 🙏🙏

  • @PrinceKumar-qs1wx
    @PrinceKumar-qs1wx 3 года назад

    can anyone share the link of this software.

  • @technicaleducationi.t.i7064
    @technicaleducationi.t.i7064 4 года назад

    Sir..
    2 ya 2 se adhik tool ko offset kaise liya jata hai

  • @santoshgautam824
    @santoshgautam824 2 года назад

    Machining not possible
    Keyo ata hai jab tool Chang karte samay

  • @gksyuhg
    @gksyuhg 2 года назад

    Cnc turning siemens G54 ko kase nikale

  • @LOK209__kumar
    @LOK209__kumar 4 года назад

    Sir work office me value aage piche nahi ho raha hai koi video banaiya

  • @akhterwaheed1910
    @akhterwaheed1910 Год назад

    Sister tool par ap nai video abi tak nai banai

  • @63_editor_rdx_rockstar40
    @63_editor_rdx_rockstar40 3 года назад

    Sir tool limit chanage karana hai sir id mai x5.0 par alarm aa raha hai

  • @shyamlal9683
    @shyamlal9683 4 года назад

    R vairiable taper threading program banai sir.

  • @nareshbabu980
    @nareshbabu980 4 года назад

    Milling pocket cycle program vedio

  • @gagaliyasohan8445
    @gagaliyasohan8445 2 года назад

    Ware led setting sow please sir

  • @deelipyadav2153
    @deelipyadav2153 2 года назад

    Sir CNC jyoti controll peanal modal 828D offset All types video

  • @laxmanrajarwad4002
    @laxmanrajarwad4002 2 года назад

    Sir Tool wear offset me TC me Tool life kaise set kare

  • @aniljangid1605
    @aniljangid1605 4 года назад

    hello sir good morning
    I am Anil Jangid
    from JST jaipur
    how to take tool offset on outer dia meter & inner dia meter on the machine with practical

    • @CNC_Guru_Tech_Center
      @CNC_Guru_Tech_Center  4 года назад

      Hi Mr. Anil jangid sir..
      Thanks for your comment.
      Actually I am not able to understand your requirement.
      But if you r looking for circular work Offset I already made a video on it.
      Kindly go through below link..
      ruclips.net/video/UdhCnyEpZC0/видео.html
      If it will not meet your need and not satisfied with it ... kindly tell your specific requirement...
      I will definitely try to support you..
      Thanks sir.

    • @CNC_Guru_Tech_Center
      @CNC_Guru_Tech_Center  4 года назад

      Can you give me your number please

  • @nareshbabu980
    @nareshbabu980 4 года назад

    Macro programing vedio

  • @sudalaimani468
    @sudalaimani468 4 года назад

    You not explained T AND C option

  • @dhanumohite9860
    @dhanumohite9860 2 года назад

    Sir good name ple