Samsung Microwave buzzing with door closed. SMH1713S. SIMPLE FIX!!!
HTML-код
- Опубликовано: 19 сен 2024
- Quick and simple fix for a Samsung above stove microwave that buzzes when the door is closed.
The model of this microwave is SMH1713S.
Try this before you buy a new microwave or replace the circuit board.
Quick fast and free fix for your microwave.
Microwave buzzes with door closed.
Samsung microwave buses with door closed.
A big thank you to fellow RUclipsr: Balaji Kandasamy for his reply to another video. I would not have found a solution without his reply.
I hope this video helps someone out there and saves you some money. I hate paying anyone to do anything for me and enjoy the satisfaction of fixing things myself.
Thought I was going to need to replace magnetron. Ran across this video. Time and money saver. Less than 5 minute fix including getting tools out, putting them away, heating bowl of water to make sure microwave was working, and putting up this response. Thanks so much!
Thanks so much. I was about to go and buy a new microwave. I decided to look on RUclips, your video came up. I did as you instructed, worked the first time. Thanks
The "buzzing" is the microwave generator continuing to operate while the door is closed.
I found a video that recommended replacing all 3 door switches, so I went ahead & did that- it was only about $12.00.
But it didn't fix the issue. This worked. Literally tapped on that relay a few times with a screw driver.
Thank you Jake !!
Also worked like a charm for my old GE monogram spacemaker with the same symptom. Disassembly was different, mine required pulling the microwave off the wall and removal of the outer casing. With the casing removed I found the equivalent-looking relay, removed the thing on top, whacked it a few times with a wooden spoon, plugged it back in to check and voila.
Thanks for making this. I inherited mine built-in which is a pain and expensive to replace
THANKSSSS A LOT. i used this video to get my microwave fixed. Nov 2013 year of manufacture. SMH1816S model. Truly thankful to you.! My Best wishes to you, SPECIAL THANKS FROM ALL the others who had commented earlier as well :-)
I was walking out the door to but a new microwave and tried this as a last ditch effort and it worked. Bless you.
About 2 hours ago, with the same microwave unit, I heard this buzzing noise when I closed the door. I had just told my wife about the problem and we both was like, we don't need any other repairs at this time. So, I searched for with the exact description of my problem and boom! Your video was the first one to come up and boy, am I glad I did. I thought I was going to have to buy another microwave but tapping on that relay worked as I saw it pop up. I checked it and there's no more problem.
Thanks again for this video so much!
Thank you. I was ready to pull the trigger on a new motherboard when I saw this video. Thank you again for saving me money.
My Samsung microwave is only a couple years old. Both fuses blew a few nights ago, and after I replaced them and plugged it back in the microwave started buzzing.
This video literally just saved what’s left of my sanity. Thank you for posting this!
I love RUclips! I had found responses to “humming microwave with door closed” saying it may be magnetron. I came across this video, which is a better first pass troubleshooting check. All I had was a utility pliers/knife handy (with Philips blade). Took the panel off, tapped the relay, IT WORKS!!. Easy fix to what sounded like an expensive problem. Thank you so much for posting this!!
For a second I thought I might have to call my home warranty company but finding this saved me a bunch of time and effort. Thank you!!
Thank you , you made my day, easy fix tap on the relay. Yup fixed it once before and also years ago a thermister was bad. Kudos to you
I haven't replaced the relay yet but tapping on it did temporarily fix the problem. THANK YOU!
So glad I stumbled upon this video!! I had another model of Samsung microwave that was making a buzzing noise when door was closed and not running. Followed the instructions in this video (my microwave had a blue and a white plug). Unplugged just the blue and tapped all around on it, plugged it back in and it was still making the noise. Then tried unplugging blue and white and tapping on both. Plugged it back in and problem was fixed!! So glad I am not shopping for a new microwave today - mine is only 2 yrs old.
Thank you! This fixed the exact same problem we encountered this morning on our 4 year old samsung microwave. At the very least it gives us more time before having to replace the entire unit. And you can't beat 'free' as a price.
This video saved us replacing our microwave! And it was completely fixed and back in order in 10 minutes! Thank you so much!
I had the same issue with my GE 1.6 cubic foot Over the range microwave oven model# JVM3160RF2SS
I watched your video and tried the same fix and it worked like a charm. Thanks for sharing.
Worked for me on a two year old samsung microwave I was worried I would have to replace 2 thumbs up and thanks for sharing!!!
Thanks for the tip! I have a GE microwave that buzzed then tripped the breaker, it looks like it has the same guts as your Samsung and this fixed the buzzing noise. You saved me a lot of time.
Same fix worked for a GE Profile JVM1790sk01 2006 model. Had to rinse/repeat several times, but fix worked. Thanks for the share!
Congratulations ! 🎉 Was hearing a hum and unplugged power from ge Unit made April 2017. GE door has a push button in the lower right side however, I like this video better. Simply pull open the door. Oh GE Hum has gone away on its own. This interesting video makes me want a Samsung in the future.
Thank you for the awesome video!
This was very helpful. Fixed my problem. Thank you
Works perfectly. Thanks for taking the time to upload the video.
Worked like a charm. Took less than 5 mins🤘🏼thought I was gonna have to spend a arm and a leg to fix it. Thanks awesome video
I just want to thank you for the fix! I have the same model and started doing this yesterday. Saw your clip and it took 2 attempts and the relay got released.
Thanks!
I’m curious how hard you had to tap? I’ve been tapping pretty good with my screwdriver and still nothing
Thanks. That worked. I have a slightly different model with the buttons along the bottom, and the handle on the far right. Remove two screws hold on the top. Side it right. Remove one screw on a metal ground bar. Slide the black panel up and off.
Thank you! It fixed my Samsung 2022 model ME19R7041FS by removing the blue plug from the board and plugging it back.
Thanks fixed it for me. My microwave is from 2020.
Thank you ! This fix worked for mine! I had two relays on a different part of the board, but still worked.
Many thanks for this video! I ran into this problem while in the midst of addressing a fully separate problem, which I was able to fix by replacing one of the door switches (switch was stuck closed and was tripping my circuit breaker... also a RUclips video fix!). Once I replaced the switch and stopped the problem of the circuit breaker tripping, the magnetron was coming on the moment I closed the door, which it was not doing prior to the door switch being stuck.
I watched your video and thought I'd give the tap-thing a try. I have a GE microwave, so there is a minor difference between the relay on your board and mine. But the overall design appears to be extremely similar.
I have to say, I tried what we will say is "tapping" on the relay, several times, with no luck. I was finally at that "last straw" point, and rather than say I "tapped" the relay (with the tip of the screwdriver), I turned the screwdriver around and it was more like a "THWOCK!" with the handle... Not super-hard but definitely not light "taps". Voila. It released the relay and it is now working. It has been a few days since that was done, and it has worked flawlessly since. I'll still keep a watch in case the relay sticks again.
Many thanks, again, for your video!
This actually worked as is five minutes ago. Just moved into my house and this saved so much time. Worked on a GE.
I just tried this and it works!! Thank you so much!!
worked like a charm! thank you Sir!
This worked for my Kenmore microwave as well! I took the panel off, checked and cleaned all 3 switches, banged on the relay, put it back together and it works perfectly! All in the course of 1 baby nap time- and without having to hire an expensive repairman!
Super helpful! I had the same problem with a GE Model JES1651SR1SS. Wouldn't shut off, just kept cooking. My model was a countertop, so all I had to do was remove the screws to take the cover off and I could access the circuit board from the side. Identified the relay, gave it a few taps, and problem solved.
The oven is 10 years old so it may be need to be replaced someday soon. But it is not this day!
There's another video on RUclips saying this shutoff problem is due to a busted magnetron. I wonder though if that guy also had a stuck relay which in turn led to the magnetron overheating and breaking. Just a thought.
Followed your advise on a Kenmore unit and worked first try. Thanks for the tip!
Awesome, thank you it worked on my GE the board looks exactly the same. I was about to buy another one $400 microwave from Lowe’s. I’ve only had this one three years. 😒
Worked for sharp carousel model r551zs except there are two relays, big and smaller; I tapped on the big one, nothing happened. When I tapped on the smaller, I heard a click and the issue is fixed ;)
Thanks for sharing this video.
Thank you! Fixed our Frigidaire microwave using this👍
This worked for me. You're a lifesaver!
Thanks! We have the exact same model and it just started doing that. Your video/steps worked for us!!
This worked for me. Thank you!
Thanks again, worked for me when I tapped the relay
Very Good video. It worked for my 11 year old samsung microwave, I will replace the relay if it happens again. I will have to check WHETHER the part number dydf-d12v-p1 is the same on mine. My model is smh9151ste
This fixed the same issue with mine. Thanks!
Super Helpful. Fixed the same issue I had with my GE.
Very good video. I fixed mine using this video. Thank you!
This worked perfectly for my GE microwave. Thank you!!
Just fixed my old GE Profile. Similar innards to yours, fixed in5 minutes. Thanks!
Thank you so much. I did exactly as you said and problem solved. Saved me a lot since Iam not tec savvy😄😄
Great it worked ! Lifesaver
Worked perfectly
Great video 👍🏻
Thank you so much for this video! Really appreciate it
Thank you ! This fix worked for mine! Awesome job
I'd like to buy one of ya'll a drink or something. Was ready to go get new uW thinking ''oh, magnetron is dead". Two min to remove covers, dowel and hammer to whack the relay,... bingo!! Will add that I missed the part about getting covers off - top cover after screw removal, slides toward side ;-)
This worked for me. Thanks!
Great this fixed mine aswell, thanks!
Thank you.👌
Yep. Simple fix for the repairman to come and fix my 3-year-old Sharp.😕
Always unplug before popping off the top vent
left mine open for a minute then closed it stopped doing it🙏🏼🙏🏼
My Samsung microwave turns on if I shut the door. I tried unplugging and plugging the relay back on, but still have the problem
You may have to tap the relay with a bit more force to encourage it to open.
Español camarada español !!!
Aprenda inglés wey
Mine runs but won’t heat!
Did you ever figure out what was going on
where is rely..u did nothing..
Did you watch the video? Unplug the connector, tap relay. As stated in the video, I performed the fix before filming the video not knowing if it would work or not. I filmed the video to demonstrate a cheap simple fix in hopes that it could help someone else. Based on the above comments, several others have successfully got their microwaves back up and running by viewing my video and reviewing these comments.