Locksmith Brighton & Hove
HTML-код
- Опубликовано: 8 сен 2024
- #locksmithlife #locksmith #brightonlocksmith
Another mixture of locksmith jobs in and around Brighton & Hove
Remember to open an account with Apecs and receive 15% off your order this weekend only using code MLAWE15
Apecs website: www.apecs.co.uk
If you enjoyed this video, please give it a thumbs up 👍🏼 and if you don’t already subscribe, please hit the subscribe button.
Thank you as always for watching 🙏🏼
HI mate maybe you could call your company GT85 locksmiths😂
try some golden eye ointment if you can get it brilliant stuff
I heard you need to do a few long runs a month to stop the DPF clogging up. I expect you do quite short trips, low revs, working locally around Brighton. Maybe put some more dpf cleaner in, use the M23, drive up to the m25 turning and come back down using high revs occasionally
Gonna 100% do some motorway miles!! Even if it’s just to clean the engine 😁
Thanks for watching 🙏🏼
3 months into my locksmith career, your videos have helped me loads, keep up the good work mate.
Ah man!! I’m glad my mediocre videos have helped your locksmith journey buddy 😁
Your eye, I think your good lady has been giving you a right-hander when you were asleep 🤣🤣 great video mate 👍
Looks like you've got a stye in your eye.
Those horizontal mortices are my most hated job.
Back in the day when they were popular the manufacturers would make them in their own unique sizes so if one failed then you'd have to buy the same make. Nowadays they only seem to make them in a couple of different sizes and a lot of customers aren't too keen on having extra holes put in their vintage doors. What makes it worse is the decades of landlords painting their screws and hardware with the thickest white paint they could find!
The same thing happened with my van. I had a busy day and was driving out quite far for my last job when the van went into 'limp home mode' on the bypass. I managed to get it into a garage and sorted that day and it only cost £550. They flushed the whole system through with acid and other chemicals and I drove out of the garage like I'd stolen a Ferrari.
with the thumb turn profiles it can trick people using the key from outside, that you might have to turn the key an extra turn to sync the cylinder and thumb and get it to pick up the cam. people often stop turning the thumb turn as soon as it locks or unlocks, leaving it out of sync. So they might think it is a problem that it sometime turns 360 and other times 720 to work
Absolutely my friend! 😁
👍👌
Hi Andy, you may have stumbled on something there, I have changed a few ERA 45 gearboxs recently in composite doors, and i have noticed that they felt a bit odd when lifting the handle but only when its in the door and fine when it was either not in the door or when it was not connected to the rail, originally thought it was the dead lock hole being to tight in the rail but filling it out made no difference, then i thought it was the length of the little screw possibly causing issues with the strap. I spoke to a different locksmith, and he said it would be worth checking the u-shaped channel that the mechanism pips for a better word sits in were not bent out of shape due to the customer trying to force the handle to get it to lock or unlock when it was broke.
Upvc not had a problem with just composite doors! Obviously, they are wood, so the hard plate will be putting pressure on the internals, tbf I did not notice that the lock was any tighter in the hole when I put it back in.
You didn't rub your eye with your fingers when you had some gta on them, did you?
Also, I had a new R6 that i bought to test out the new lishi pick i bought, and 3 of the 5 keys would not go in one side of the lock, but we're as smooth as on the other side?
100% in a timber door it the width buddy. It squeezes the lock case causing a problem!! Just a cheeky little shave down the sides with a sharp chisel and you’ll be good brother 👊🏼
Enjoyed that, always fun to learn about your adventures.
Thanks for watching buddy 🙏🏼😁
I had a customer once who thought it would be a good idea to use graphite powder in the lock and ended up filling the lock with graphite powder so bad that you couldn't stick the key in all the way obviously causing a lockout maybe that is what happened with your first job😊
Possibly buddy!! It was proper clogged up!!
Thank you for watching 🙏🏼
Yo Andy, How’s it going mate? Afew years ago you mentioned on a vid about your experiences regarding Auto, i cant find it? I’m considering going in that direction after a gap in the market opened up around my area. Thanks Steve 👍
Hi Steve. All good here thanks bud. Hope you are well too.
My only advice regarding Auto would be to make sure you do a decent course. I did an online course during Covid which gave me the basic knowledge but I found out fairly quick that I was out of my depth with some jobs.
So, do some research into courses (MLA, Fox Locks in Birmingham, Darbys in Hastings) are some that I’ve heard are good for auto mate.
A gap in the market can only be good news 😁
Oh, and expect to spend upwards of £20K for the equipment 😬
@@brighton_locksmith Great info thanks 🙏 Yeah the local guy has emigrated. Scary amount of cash though, ouch. Look forward to your next vid mate
@@Hem101 Yeah it’s very pricey getting into Auto bud. But can be well worth it if you can generate the work 😁
Good luck with it bud 👍🏼
cataclean mate
not much money on those jobs mate i suppose same as me way it goes