Back in the day, there was a RUclipsr who's channel name was... Ultimate RC, I think? His logo was yellow and green and I think his name was Chang, Yan, Jang, something like that. He stopped making videos and I feel the hobby has needed someone like him to fill in the shoes that he left. There are many content creators in the RC hobby these days, but none have matched the quality of his content. Until you. Keep up your amazing job. Change nothing! Keep doing what you do, the same way you're doing it!
My dude, you need to start linking to the stuff you use to make vids in the description. It gets you affiliate income and lets us easily see what it would cost to emulate your awesome builds.
I appreciate that but I don't do affiliate sales as this channel isn't about making profit. It's not even monetized. I also don't usually leave links because they tend to go bad and then they have to be updated etc.
If someone would’ve asked me about the Voltage in mid 2023, I would’ve told them I considered it to be a dying platform by Arrma. A few redesigns and a year later, good on Arrma for proven me wrong.
Yeah I think if they had stuck with the original basic voltage it probably would have died but this platform shares nothing with that original design other than the basic external look.
It kinda looks like a Voltage but as far as I know they share nothing either externally or internally. I don't think the Voltage could handle brushless power very well.
@@alantaylor353 Yeah, my point wasn’t that Arrma just slapped some new bodies on the Voltage. Rather, I’m impressed they took the time to invest in a redesign and improve the entire concept of the Voltage. From an entry level 2wd, center beam, 10th scale into an upgradable and much more robust version.
You can use the body posts from the Senton/Granite etc to fit aftermarket bodyshells.! I've just fitted a cut down 1/10 Big Rock bodyshell to my Gorgon using the Big Rock bodyposts.
I'm not sure that will work as well here given that this doesn't use the same system to mount the body posts. It uses notches and tabs. You could probably still make it work though.
5:25 Well 2 cents off 1 car differential in 1 million cars shipped is 20000 dollars. Some guy at the factory got himself a new used 2021 real car. Also, they can save some money by selling the roller without motor/esc/battery/receiver/transmitter to save that extra 2 cents. I like it brushed, but not 3slot 14T Nimh brushed. Even I will swap that 40 amp esc for 1060 or 1080g2. But you are right on that one: quality and durability should be a main priority and not only in the RC world. Great detailed in-depth review as usual.
Yeah I would gladly pay the extra whatever it costs for them to put fluid in the differential. Grease is fine as long as you never plan on doing anything with it but It really sucks if you have to get all that out of there to put fluid in. I almost rather they just leave it dry and let us put whatever we want in it but of course you can't have that.
@@DoRC Also yes, roller with dry differential and maybe even empty shocks. I kinda like mine filled with the thinnest oil available for "pinball" mode, but I get it why most people hate it.
The grease makes sense to me; I bet most of these trucks live and die with the diff never getting cracked open since this is an entry-level truck. You want those gears to stay lubricated for the expected life of the truck, and grease in a sealed diff ain't going anywhere!
Hbx for kids. Cheap, fast, tough. My eight year old has been running hers into curbs for three years. I bought new tires for it last year and that's the only fix so far. It's going to last for years to come. Best 95 bucks I ever spent.
Knowing what I did with one of my Gorgons, I will go full stupid on my red Fury. The 2 in 1 mounting fits the 6s/8s Traxxas ESCs perfectly. As do the 540XL motors. Time to get busy. Once again, amazing review and by far the best out there, Talbot kills them so I don't have to. You take them apart so I don't have to.
@@DoRC i will donate the voltage to a kid and find a Gorgon…..definitely trust the advice you give…..BTW Keep your format it’s just clean and simple (in a good way) Thank you
@@gordousmaximus That seems reasonable. You would probably spend quite a bit of money on the voltage just to get it up to the point that the Gorgon is out of the box.
Awesome review. Have to say I love the look of this thing and would love it if Arrma sold it with a traditional 4WD set up .. Looked so good drifting in the vid..
Hot Racing makes a 15mm aluminum motor spacer to make that HW motor fit. Only issue you might run into is the shaft then being to short. I had to flip my pinion around and put it on the very end of the shaft. It's hung on since before Christmas tho. I'm running a 100a 4000kv Spektrum combo in my Gorgon. The motor isn't recommended for 3s but it's run on it for nearly a year. It makes the Gorgon stupid fun.
That thing is awesome for the price but if i get one i will probably go brushless first thing! Also that one jump looked a little close to the noggin! Great video!
Nice video. I really like this platform. Looks durable and upgradable. I like the shot where you almost got hit. I did the same thing the other day taking my MT10 off my big kicker ramp not paying close enough attention. You would think I could hit a 40 inch wide ramp a little more square. 😃
Yeah recording and driving at the same time while at a 45° angle to the ramp with the car coming at you definitely is not the easiest thing in the world.
Thank you for your video I have Gorgon and granite and lwb rival mt10 but I want Fury, too😅 I was especially curious about Monster Fury I'll look forward to the next video
I'm gonna try to get a 3650 motor to fit without cutting the chassis using the Hot Racing motor spacer meant for the Gorgon. I'm a huge fan of this platform so far. Cheap, durable, mod-friendly and fun.
Nice that should work. Yeah this is actually my first experience with the platform as I never ended up getting a gorgon when they first came out. It's pretty sweet!
I've been enjoying the heck out of my new Gorgon.!! 👍 👍 👍 It's running a Surpass 3660, 4300kv motor & Hobbywing WP-SC8 ESC. It does around 50 mph, wheelies on demand at almost any speed, it jumps & flips with surprising ease & after strategically fitting some preload clips, it handles really well & other than the body, it seems pretty bomb proof.!! I will absolutely, most definitely without a shadow of a doubt be getting myself a Fury when they're released next month in the UK.! 😉 😉 THANK YOU for another great video.. Please stay safe out there mate & the very best wishes from Scotland 🏴 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍 👍
I've rewatched your running footage a few times... It looks bloody amazing.! I think you've left most of your tyres on the road though.! 😉 😉 😂 😂 Those tyres are nice but don't last long.! My last new Senton destroyed all four in under a week of driving on tarmac.! At least with a 2wd you can swap front to back.! 😉
Hey did hobby shop have these yet , I’ve used the original Gorgon only few times , try to preserve some rcs have to keep more working than not 😮 I almost bought the terminator before it was on sale but over now . These new Arrmas Redcat Valkyrie and riaalo… really get you ahead of the game if it’s your first RC . These gorgons fury transmissions are stout and simple it’s genius.
For the $169 price i picked up a Senton Boost at my local Hobbytown and since i already own 6 other Arrmas' i will be converting the Senton to a 3s which in my case, i consider the Senton a better truck than this one. I don't like that thin long chassis on the Fury. It is great though to see Arrma still developing affordible new rc vehicles for people getting into the hobby. Great video BTW.
I'm actually really liking the thin long chassis. It doesn't have a big dished area for a bunch of crap to get caught up in and it keeps the weight really centralized. It's also nice because it's a dedicated two-wheel drive platform. The boost has four-wheel drive geometry which is never going to be as good as true two-wheel drive geometry.
My main complaints with the gorgon is the servo and service arm mounting is unnecessarily hard to work on. Otherwise great truck and one of my sons favorites.
No. I just said it by hand without the kit but I recommend getting it or at least the reinforcement plates you can get because the plastic is fairly soft and the screw does dig into it.
Nice video and very good platform from Gorgon! You say something wrong, these shocks are not on the 4s series, on the 4s they are 15 mm and they are different with an aluminum body, as you well know!
Sorry I may not have been clear. I was referring to the fact that the bottoms of the 4S shocks are removed using that special tool as well. They are not identical in design to the 3S ones. You're correct.
Seems like it would be A LOT cheaper to get a stock Senton 3s, or a MEGA and upgrade that.. You can even get the Team Associated 70019 Trophy Rat Short Course Truck already brushless for $250 right now, and all of those are more well established platforms.
Yeah just depends on what your goals are. The boost truck don't make the best two-wheel drive trucks because they have four wheel drive geometry and whereas there are definitely other options for two wheel drive trucks I think the Gorgon platforms really good for bashing because it's pretty simple and pretty tough.
The gorgon i wasnt feeling as much, this however? This looks like something i would buy 2 of. More interested in this than the Vorteks. Arrma advertises that the drivetrain is super capable, so i feel like this would be better than the Hpi, Jumpshots (2wd) especially for the price. And for the money i rather this than one of thr Groms Strangely im not a fan of clipless body mounts. Feels like a hassle, but as someone who looses body pins regularly, i get it. What other shocks would you recommend for this? Composite shocks esp of that design can only last so long
I would stick with these to see just how long they will last. I've had really good luck with the plastic shocks on the 3S trucks and these shocks are almost identical. In the application they'll probably be fine.
I'm just checking back in to tell everyone That my drag fury build is completed and is running 2.5s @ 55 mph with same motor and esc as the losi 22s and it's currently gapping my friends drag slashes.
@@DoRC one day I’m gonna bling up the front with aluminum. I wanted to get blue but it appears the only thing available now is red casters and steering blocks. I’m kinda scared to run it anymore because finding replacement a arms had been a pain
Looks like it stays on its wheels much better than the boost platform Senton, which this appears to have replaced, but I’m still not a fan of that granite voltage style chassis. I primarily use my rig on a carpet track, so this wouldn’t help me out with no adjustments in height or camber. Looks plenty rugged tho.
It's very stable. As far as the chassis keep in mind that even though it looks like the granite voltage it's not the granite voltage. Other than the basic shape the two platforms share nothing in common.
The only one I think I would get would be the 2wd vortex the new one more of a traditional stadium truck feel rear motor, motor in the back she I’d love to be able to check out those clippers body mounts I also hearted and saved that hobby wing quick tin brushless combo on my Amazon would be great for my Tekin motor I’ll just have to cut the bullets off.
With the motor basically needing to be a 3660 can or one of those motors with a rear wire exit, you may as well go for the 10bl120 esc motor combo for $90. I don’t see many options from even the Amazon brands. They all have top exit
Yeah if you get things on sale you can probably save maybe 20 bucks with the 60 amp ESC and it does seem plenty powerful enough but I agree for simplicity and practicality just going with the 120 combo probably is the best way
If the motor shaft is long enough you can add a spacer between the motor and the mounting plate. Companies make aluminum ones that are also supposed to aid in motor cooling.
I think I had a torment a while back but to be honest with you it's been so long that I don't remember. I will say that for bashing I'm not really sure how you could beat this platform.
Awesome truck I think I'll have to get one! Something a little off topic: you don't have to give me any exact numbers but I'm curious if 20K subscribers brings in enough ad revenue to get the bills paid without a 2nd job. I'd love to be a full-time RUclipsr but I just want to get an idea of a goal I should be shooting for. 😎🤙🏽
I wish I could help you but my channel is not monetized nor do I do affiliate sales. This channel is For love of the hobby and to to get to talk to you guys :-)
@@DoRC oh cool right on man. Thanks for the reply. You may as well monetize though. It won't affect any of us subscribers negatively, but it will affect you positively. 😎🤙🏽
@@brsrc759 I appreciate that but not being monetized is a personal decision. I might change my mind in the future but for now I'm happy with the way things are :-)
@@DoRC can't argue with that! I love your attitude and of course your videos. You make pretty much the best and most in-depth review videos on RUclips. So stoked I found your channel. Aloha 😎🤙🏽
It now has too much power to drive well, which is what most RCers want. Next time bring a dirt rake with you. You had a pile in the road that was just begging to be turned into a jump, rather than just being slammed into. Few reviewers put much time into improving their bashing spots. You could lead the pack.
I would but it's not my spot and I'm not really probably supposed to be there so spending extra time doing anything that isn't bashing doesn't feel like a good idea to me :-)
@@DoRC How about a direct comparison to a 2WD Traxxas Slash? I normally run a Slash at my local track for fun when I'm not racing. It might make for an interesting video doing a direct comparison between the two. Ease of upgrades, parts availability, driving experience, durability and so on.
It was a pretty modest 3S system with fairly conservative gearing. It was 50% faster than the stock system on 2S which is pretty much what I was going for.
You don't need them but in my nearly 25 years is a professional mechanic I've learned that they really can make life better. In this case specifically having a decent set of hex bits will prevent you from stripping out a lot of screws.
@Johnny6ex Yeah and if they work for you that's great. I've probably owned 30 or 40 different sets of bits over the years and I have found all of the cheap ones tend to wear quickly and don't fit well. If you're using them in ideal conditions they can work but once they start to wear out or if you run into a worn hex you're a lot more likely to strip them out. I use these MIP bits every single day and they last years. Sure they're more expensive but if you break the cost out over how long they last it's totally worth it. At least to me.
What you doing wipe that grease out 😂 who cares about the residual if don’t care if grease anyway , just 5k or something hopefully it’s not so strong just because the diff is open
You gonna convert it to a Gorgon? Be careful when you say things like "make a real monster out of this truck" as the term "monster truck" is already in common use and means something different than just adding more power.
I think it depends on what your goals are. Objectively if you're trying to get somewhere or are looking for the best handling possible then yes four-wheel drive is better but that doesn't really take into account the fun factor. Two wheel drive vehicles handle completely differently from four-wheel drive vehicles and at least in my opinion are a different kind of fun
@@DoRC More kinda fun in a more challenging to drive without looping-out kinda way! But seriously yeah it is a different flavor of driving and it is nice to have that variety over the 4WD point and shoot driving. It has always been interesting though that 2WD due to its price has typically been an entry point for people into the hobby, and they are starting with an RC that has more of a learning curve to drive.
@@nicko2222 It's a pretty normal reaction and to be honest For many people it's true. If I could only own one RC car and had a choice between two wheel drive and four-wheel drive I would pick four-wheel drive. Two wheel drive is fun though!
@@DoRC true but it’s two different things and i don’t understand why they’re constantly being compared. it’s like seeing someone eating an apple and saying to them “well oranges are better!” it’s just unnecessary
Back in the day, there was a RUclipsr who's channel name was... Ultimate RC, I think? His logo was yellow and green and I think his name was Chang, Yan, Jang, something like that. He stopped making videos and I feel the hobby has needed someone like him to fill in the shoes that he left.
There are many content creators in the RC hobby these days, but none have matched the quality of his content.
Until you.
Keep up your amazing job. Change nothing! Keep doing what you do, the same way you're doing it!
It's awesome to hear you say that because URC was one of the main inspirations for this channel!
His name is Jang. UltimateRC was the best. He does Lego reviews now.
I’ve literally watched this 10+ times. So informative. Much appreciated 👍✌🏼
Awesome thanks so much for watching!
My dude, you need to start linking to the stuff you use to make vids in the description. It gets you affiliate income and lets us easily see what it would cost to emulate your awesome builds.
I appreciate that but I don't do affiliate sales as this channel isn't about making profit. It's not even monetized. I also don't usually leave links because they tend to go bad and then they have to be updated etc.
I respect that !! @@DoRC
If someone would’ve asked me about the Voltage in mid 2023, I would’ve told them I considered it to be a dying platform by Arrma. A few redesigns and a year later, good on Arrma for proven me wrong.
Yeah I think if they had stuck with the original basic voltage it probably would have died but this platform shares nothing with that original design other than the basic external look.
It kinda looks like a Voltage but as far as I know they share nothing either externally or internally.
I don't think the Voltage could handle brushless power very well.
@@alantaylor353 That's exactly right. They share the same basic form factor but I don't think they share any parts in common
@@alantaylor353 Yeah, my point wasn’t that Arrma just slapped some new bodies on the Voltage. Rather, I’m impressed they took the time to invest in a redesign and improve the entire concept of the Voltage. From an entry level 2wd, center beam, 10th scale into an upgradable and much more robust version.
@@JT-6s They've certainly done a good job of it haven't they.! 👍 👍 👍
I had the old 2015 fury and loved it.
This thing has my attention.
This is definitely a much better truck than the old ones were.
Nice to see they re released the Fury with a far superior chassis. I had all the different generations of the Fury many many years ago.
Yeah this thing's a tank!
You can use the body posts from the Senton/Granite etc to fit aftermarket bodyshells.!
I've just fitted a cut down 1/10 Big Rock bodyshell to my Gorgon using the Big Rock bodyposts.
I'm not sure that will work as well here given that this doesn't use the same system to mount the body posts. It uses notches and tabs. You could probably still make it work though.
5:25 Well 2 cents off 1 car differential in 1 million cars shipped is 20000 dollars. Some guy at the factory got himself a new used 2021 real car. Also, they can save some money by selling the roller without motor/esc/battery/receiver/transmitter to save that extra 2 cents. I like it brushed, but not 3slot 14T Nimh brushed. Even I will swap that 40 amp esc for 1060 or 1080g2. But you are right on that one: quality and durability should be a main priority and not only in the RC world. Great detailed in-depth review as usual.
Yeah I would gladly pay the extra whatever it costs for them to put fluid in the differential. Grease is fine as long as you never plan on doing anything with it but It really sucks if you have to get all that out of there to put fluid in. I almost rather they just leave it dry and let us put whatever we want in it but of course you can't have that.
@@DoRC Also yes, roller with dry differential and maybe even empty shocks. I kinda like mine filled with the thinnest oil available for "pinball" mode, but I get it why most people hate it.
The grease makes sense to me; I bet most of these trucks live and die with the diff never getting cracked open since this is an entry-level truck. You want those gears to stay lubricated for the expected life of the truck, and grease in a sealed diff ain't going anywhere!
1 mil cars? I doubt RC cars sell in this volume
You think they will make a million of these? 🤣🤣 2 cents for 5000 units is $100 saved.
Yea, I’m thinking my boys need 2WD trucks now too 😆
Nice video as always 🤘🏻
Thanks glad you enjoyed :-)
Hbx for kids. Cheap, fast, tough. My eight year old has been running hers into curbs for three years. I bought new tires for it last year and that's the only fix so far. It's going to last for years to come. Best 95 bucks I ever spent.
Waiting on the need upgrade video for this!
Not quite sure what you're saying here
Knowing what I did with one of my Gorgons, I will go full stupid on my red Fury. The 2 in 1 mounting fits the 6s/8s Traxxas ESCs perfectly. As do the 540XL motors. Time to get busy. Once again, amazing review and by far the best out there, Talbot kills them so I don't have to. You take them apart so I don't have to.
Thanks man Glad you enjoy:)
Very cool. These 2wd rc’s are a lot of fun.
Yeah I'm starting to get more and more into them.
My first Hobby grade RC was an Arrma Granite Voltage 2wd and i still love it cant wait to really upgrade the heck out of it
You might want to consider just buying a gorgon. It's a much better platform and I'm not sure putting money into the granite voltage is the best idea
@@DoRC i will donate the voltage to a kid and find a Gorgon…..definitely trust the advice you give…..BTW Keep your format it’s just clean and simple (in a good way) Thank you
@@gordousmaximus That seems reasonable. You would probably spend quite a bit of money on the voltage just to get it up to the point that the Gorgon is out of the box.
Awesome review. Have to say I love the look of this thing and would love it if Arrma sold it with a traditional 4WD set up .. Looked so good drifting in the vid..
Yeah it sounds good too. Sounds like a full size car drifting around :-)
cool new look, RC with great adventure, always good videos bro👍👍😃
Glad you enjoyed and thanks for watching!
Thanks Glad you enjoyed!
Hot Racing makes a 15mm aluminum motor spacer to make that HW motor fit. Only issue you might run into is the shaft then being to short. I had to flip my pinion around and put it on the very end of the shaft. It's hung on since before Christmas tho. I'm running a 100a 4000kv Spektrum combo in my Gorgon. The motor isn't recommended for 3s but it's run on it for nearly a year. It makes the Gorgon stupid fun.
Nice! Yeah I'm just now learning about this platform as I didn't end up getting a gorgon when they first came out. It's pretty sweet.
Mines on the way. Can’t wait to get it. Ordered a Hobbywing QuicRun 10BL120 G2 Sensorless Brushless ESC/3660SL Motor Combo (3700kV) to go in it.
That should be a sweet combo!
Yeah it should. I wanted green but it wasn’t in stock so I got blue so it could ship now.
@@DoRChey man you think a 20kg servo is good
I have just bought the same Combo lol.
Question: where are you putting the receiver?
That thing is awesome for the price but if i get one i will probably go brushless first thing! Also that one jump looked a little close to the noggin! Great video!
It was. Hazard of the job:)
Nice video. I really like this platform. Looks durable and upgradable. I like the shot where you almost got hit. I did the same thing the other day taking my MT10 off my big kicker ramp not paying close enough attention. You would think I could hit a 40 inch wide ramp a little more square. 😃
Yeah recording and driving at the same time while at a 45° angle to the ramp with the car coming at you definitely is not the easiest thing in the world.
Thank you for your video
I have Gorgon and granite and lwb rival mt10 but I want Fury, too😅
I was especially curious about Monster Fury I'll look forward to the next video
Stay tuned:)
I'm gonna try to get a 3650 motor to fit without cutting the chassis using the Hot Racing motor spacer meant for the Gorgon. I'm a huge fan of this platform so far. Cheap, durable, mod-friendly and fun.
Nice that should work. Yeah this is actually my first experience with the platform as I never ended up getting a gorgon when they first came out. It's pretty sweet!
I've been enjoying the heck out of my new Gorgon.!! 👍 👍 👍
It's running a Surpass 3660, 4300kv motor & Hobbywing WP-SC8 ESC.
It does around 50 mph, wheelies on demand at almost any speed, it jumps & flips with surprising ease & after strategically fitting some preload clips, it handles really well & other than the body, it seems pretty bomb proof.!!
I will absolutely, most definitely without a shadow of a doubt be getting myself a Fury when they're released next month in the UK.! 😉 😉
THANK YOU for another great video..
Please stay safe out there mate & the very best wishes from Scotland 🏴 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍 👍
Heck yeah man! I never actually got a Gorgon and now I think I want one.
Awesome truck, can't wait to get mine!
Is it on its way?
That upgrade definitely drives like a realistic automobile 👍 and maybe do a tire rotation in the future
Yeah I'm excited to see what happens when I go crazy with it :-)
I love this is mid motor mounted.
Yeah the balance is really good.
I like my Arrma Mojave Grom. But this looks good too.
It's a pretty fun truck.
I've rewatched your running footage a few times... It looks bloody amazing.!
I think you've left most of your tyres on the road though.! 😉 😉 😂 😂
Those tyres are nice but don't last long.!
My last new Senton destroyed all four in under a week of driving on tarmac.!
At least with a 2wd you can swap front to back.! 😉
Actually it's not as bad as it looked. The asphalt is dusty so I was really just cleaning the dust off most of the time :-)
Do you think that the battery is violently bashing around inside that box?
Probably.
@@DoRC 😝
Hey did hobby shop have these yet , I’ve used the original Gorgon only few times , try to preserve some rcs have to keep more working than not 😮 I almost bought the terminator before it was on sale but over now . These new Arrmas Redcat Valkyrie and riaalo… really get you ahead of the game if it’s your first RC . These gorgons fury transmissions are stout and simple it’s genius.
I have heard that a couple of hobby shops have them but I doubt all of them do yet.
🆒🎦👌great review of this RC 💪🔥👍👋🍀
Glad you enjoyed thanks for watching :-)
The roof skids from the mojave 4s fit on just about anything.
Nice! I'll check it out.
For the $169 price i picked up a Senton Boost at my local Hobbytown and since i already own 6 other Arrmas' i will be converting the Senton to a 3s which in my case, i consider the Senton a better truck than this one. I don't like that thin long chassis on the Fury. It is great though to see Arrma still developing affordible new rc vehicles for people getting into the hobby. Great video BTW.
I'm actually really liking the thin long chassis. It doesn't have a big dished area for a bunch of crap to get caught up in and it keeps the weight really centralized. It's also nice because it's a dedicated two-wheel drive platform. The boost has four-wheel drive geometry which is never going to be as good as true two-wheel drive geometry.
can i just change the esc (3S) and using stock motor?
Probably not. You'll very likely burn the motor up.
My local hobby shop has the new vorteks with a 10bl120 set up it rips!
Nice!
My main complaints with the gorgon is the servo and service arm mounting is unnecessarily hard to work on. Otherwise great truck and one of my sons favorites.
Yeah there are a few things on this truck that definitely could have been done better but overall it's pretty good.
Hi, did you use the Arrma mesh plate kit for this brushless conversion?
No. I just said it by hand without the kit but I recommend getting it or at least the reinforcement plates you can get because the plastic is fairly soft and the screw does dig into it.
@@DoRC Will do ! Thanks for getting back to me! Have a great upcoming weekend!
@Jonn1969 you too:)
Nice video and very good platform from Gorgon! You say something wrong, these shocks are not on the 4s series, on the 4s they are 15 mm and they are different with an aluminum body, as you well know!
Sorry I may not have been clear. I was referring to the fact that the bottoms of the 4S shocks are removed using that special tool as well. They are not identical in design to the 3S ones. You're correct.
Seems like it would be A LOT cheaper to get a stock Senton 3s, or a MEGA and upgrade that.. You can even get the Team Associated 70019 Trophy Rat Short Course Truck already brushless for $250 right now, and all of those are more well established platforms.
Yeah just depends on what your goals are. The boost truck don't make the best two-wheel drive trucks because they have four wheel drive geometry and whereas there are definitely other options for two wheel drive trucks I think the Gorgon platforms really good for bashing because it's pretty simple and pretty tough.
This video was just what the doctor ordered 😊
See me tomorrow for a follow-up!
@@DoRC yessur
Will do
My pleasure 😁
The gorgon i wasnt feeling as much, this however? This looks like something i would buy 2 of. More interested in this than the Vorteks. Arrma advertises that the drivetrain is super capable, so i feel like this would be better than the Hpi, Jumpshots (2wd) especially for the price. And for the money i rather this than one of thr Groms
Strangely im not a fan of clipless body mounts. Feels like a hassle, but as someone who looses body pins regularly, i get it.
What other shocks would you recommend for this? Composite shocks esp of that design can only last so long
I would stick with these to see just how long they will last. I've had really good luck with the plastic shocks on the 3S trucks and these shocks are almost identical. In the application they'll probably be fine.
Speed and power!! 😁
Wait for the next video :-)
On the brushless system speed runs did you use 2s or 3s?
3s. Given the KV of the motor to as likely would not have really been any faster than brushed
Good video
Thanks and thanks for watching!
I'm just checking back in to tell everyone
That my drag fury build is completed and is running 2.5s @ 55 mph with same motor and esc as the losi 22s and it's currently gapping my friends drag slashes.
That's awesome!
All this 2wd business has me nostalgic for my raider
Yeah I've got one of those too I need to do something with it :-)
@@DoRC one day I’m gonna bling up the front with aluminum. I wanted to get blue but it appears the only thing available now is red casters and steering blocks. I’m kinda scared to run it anymore because finding replacement a arms had been a pain
@@dylanwhite6539 Yeah parts have definitely become scarce.
You almost get hit, but still good moments. Hands up if anyone happens the same. Me that happened to me
Yeah when you're the driver and the cameraman sometimes you've got to get in the way to get the shots :-)
Looks like it stays on its wheels much better than the boost platform Senton, which this appears to have replaced, but I’m still not a fan of that granite voltage style chassis. I primarily use my rig on a carpet track, so this wouldn’t help me out with no adjustments in height or camber. Looks plenty rugged tho.
It's very stable. As far as the chassis keep in mind that even though it looks like the granite voltage it's not the granite voltage. Other than the basic shape the two platforms share nothing in common.
The only one I think I would get would be the 2wd vortex the new one more of a traditional stadium truck feel rear motor, motor in the back she I’d love to be able to check out those clippers body mounts I also hearted and saved that hobby wing quick tin brushless combo on my Amazon would be great for my Tekin motor I’ll just have to cut the bullets off.
Yeah the vorteks is pretty cool too!
With the motor basically needing to be a 3660 can or one of those motors with a rear wire exit, you may as well go for the 10bl120 esc motor combo for $90. I don’t see many options from even the Amazon brands. They all have top exit
Yeah if you get things on sale you can probably save maybe 20 bucks with the 60 amp ESC and it does seem plenty powerful enough but I agree for simplicity and practicality just going with the 120 combo probably is the best way
If the motor shaft is long enough you can add a spacer between the motor and the mounting plate. Companies make aluminum ones that are also supposed to aid in motor cooling.
I bought the Amazon kingVal 3660 3500kv motor 60a 2-3s esc for 55 bucks. shipped. Rips. I love it.
SCTs have the nicest looking body roll...
They definitely do look good in slow motion!
bummer that a 3660 is needed. I have a castle 1410 on hand I was hoping to use.
You can't get a spacer that allows you to run shorter can motors though I'm not sure you can run that one specifically.
How does it compare to the ECX Torment 2wd?
I think I had a torment a while back but to be honest with you it's been so long that I don't remember. I will say that for bashing I'm not really sure how you could beat this platform.
@@DoRC TY, I'm looking into getting one to mod and bash.
Well based on how long ago the ECX came out and the fact that it's discontinued I really think The Fury would be your better choice.
Surpass hobby v2 (f550) fits well in gorgon, but it gets hot
Good to know!
13:24 I wonder if you ever got headshotted by the rc lol, have you ever got hit real bad trying to get the shot for your vids?
I've never taken a full-on headshot but I have been hit pretty hard before. No serious injuries yet.
Awesome truck I think I'll have to get one!
Something a little off topic: you don't have to give me any exact numbers but I'm curious if 20K subscribers brings in enough ad revenue to get the bills paid without a 2nd job. I'd love to be a full-time RUclipsr but I just want to get an idea of a goal I should be shooting for. 😎🤙🏽
I wish I could help you but my channel is not monetized nor do I do affiliate sales. This channel is For love of the hobby and to to get to talk to you guys :-)
@@DoRC oh cool right on man. Thanks for the reply. You may as well monetize though. It won't affect any of us subscribers negatively, but it will affect you positively. 😎🤙🏽
@@brsrc759 I appreciate that but not being monetized is a personal decision. I might change my mind in the future but for now I'm happy with the way things are :-)
@@DoRC can't argue with that! I love your attitude and of course your videos. You make pretty much the best and most in-depth review videos on RUclips. So stoked I found your channel. Aloha 😎🤙🏽
@@brsrc759 thanks Glad you enjoy :-)
was the brushless speed run on 2s or 3s?
3s
@@DoRC i am probably going for a 2600kv with a 13 or 14t and a hobby rocket esc
@@DoRC what pinion are you using 13 right?
@politie_jip112 whatever the stock one is I think 13 or 14.
@@DoRC alright 13t is stock
It now has too much power to drive well, which is what most RCers want. Next time bring a dirt rake with you. You had a pile in the road that was just begging to be turned into a jump, rather than just being slammed into. Few reviewers put much time into improving their bashing spots. You could lead the pack.
I would but it's not my spot and I'm not really probably supposed to be there so spending extra time doing anything that isn't bashing doesn't feel like a good idea to me :-)
Anyone know what size of the stock motor shaft ?
It's 1/8 in
@@DoRC thank you Do
This is how it should be sold.
Yeah but then it would cost more :-)
@@DoRC I think it would outsell the brushed version...even if it was $50 more...anyway...great day Amigo..✌🏻😎
Don't like bottom loaded shocks they always leak out and you have to remove them to add oil aftermarket shocks in the future 😮😅😅
I have never had a problem with the shocks since they updated the o-rings a while back.
@@DoRC my losi mini b had bottom loaded shocks but not now I got hot racing shocks and they work great 😎👍
@@richardbrown6762 Yeah the hot racing shocks are good. These actually work pretty well though
@@DoRC I changed the springs of soft ones light car and I put the spectrum 6000kv motor and it chewed the tires off lol
@@DoRC I want to put a brush less motor on my typhon grom but I want to keep the fan you have any suggestions?
You will break your truck when you jump big jumps and I have problems getting parts but it's yours to do that 😮😅😅😅
Which parts do you have problems with?
@@DoRC every thing
I'm not really a fan of Arrma, but they nailed the design on this truck. As far as a cheap basic basher goes, this thing is awesome looking.
It's definitely good!
@@DoRC How about a direct comparison to a 2WD Traxxas Slash? I normally run a Slash at my local track for fun when I'm not racing. It might make for an interesting video doing a direct comparison between the two. Ease of upgrades, parts availability, driving experience, durability and so on.
That was on 3s in hat seemed very slow lol
It was a pretty modest 3S system with fairly conservative gearing. It was 50% faster than the stock system on 2S which is pretty much what I was going for.
Did you suffer from a small stroke for the last few seconds of this video? jk
I'm not sure what you mean? I watched the end of the video and it sounds pretty normal to me.
You dont need expensive tools
You don't need them but in my nearly 25 years is a professional mechanic I've learned that they really can make life better. In this case specifically having a decent set of hex bits will prevent you from stripping out a lot of screws.
@DoRC ye but some are quality for not that expensive and i like switchable bits makes it so easy to swap betwen a handle or machine
@@Johnny6ex The MIP bits I showed are switchable.
@DoRC dono these bit to expensive i got ful set for 20 somthing
@Johnny6ex Yeah and if they work for you that's great. I've probably owned 30 or 40 different sets of bits over the years and I have found all of the cheap ones tend to wear quickly and don't fit well. If you're using them in ideal conditions they can work but once they start to wear out or if you run into a worn hex you're a lot more likely to strip them out. I use these MIP bits every single day and they last years. Sure they're more expensive but if you break the cost out over how long they last it's totally worth it. At least to me.
I always tell people. 1/10 is the sweet spot! 1/5 are too big to do anything meaningful.
This thing's really nice too because it's very light even for one 10th scale.
14mm hexes?? WTF?
I think it's a good thing.
What you doing wipe that grease out 😂 who cares about the residual if don’t care if grease anyway , just 5k or something hopefully it’s not so strong just because the diff is open
The grease is actually thick enough that it doesn't feel wide open so I figured I'd leave it alone.
You gonna convert it to a Gorgon? Be careful when you say things like "make a real monster out of this truck" as the term "monster truck" is already in common use and means something different than just adding more power.
Oh no I'm not just going to add more power :-)
4wd is better.
I think it depends on what your goals are. Objectively if you're trying to get somewhere or are looking for the best handling possible then yes four-wheel drive is better but that doesn't really take into account the fun factor. Two wheel drive vehicles handle completely differently from four-wheel drive vehicles and at least in my opinion are a different kind of fun
@@DoRC More kinda fun in a more challenging to drive without looping-out kinda way! But seriously yeah it is a different flavor of driving and it is nice to have that variety over the 4WD point and shoot driving. It has always been interesting though that 2WD due to its price has typically been an entry point for people into the hobby, and they are starting with an RC that has more of a learning curve to drive.
so tired of people saying this literally every time they see a 2wd car lol
@@nicko2222 It's a pretty normal reaction and to be honest For many people it's true. If I could only own one RC car and had a choice between two wheel drive and four-wheel drive I would pick four-wheel drive.
Two wheel drive is fun though!
@@DoRC true but it’s two different things and i don’t understand why they’re constantly being compared. it’s like seeing someone eating an apple and saying to them “well oranges are better!” it’s just unnecessary