Yaesu FT-897 Transmit Frequency Expansion Mod (MARS/CAP)

Поделиться
HTML-код
  • Опубликовано: 15 окт 2024
  • Mods for the FT-857 and FT-891 should be similar. Here is the document detailing this mod, and others: www.qsl.net/oz...
    Join the Discord or Matrix chat server, if it's not too spicy for you. Videos post one week earlier on Alt Tech platforms. Links to these things and more: ocfco.net/info....

Комментарии • 32

  • @wa4cdm
    @wa4cdm Год назад +3

    Please note that this mod only to ft-897's units outside of Japan. The ones made for Japan are hard coded and will not respond to the mod for TX.

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Год назад

      Good info~!

    • @onedeadtony
      @onedeadtony Год назад

      Lame. Can you explain hard coded to me please? Thx

    • @onedeadtony
      @onedeadtony Год назад

      Also, how do you know this?

    • @wa4cdm
      @wa4cdm Год назад

      @@onedeadtony The processor has rom inside that cannot be changed. Think of it as a one time programable memory.

    • @wa4cdm
      @wa4cdm Год назад

      @@onedeadtony From some research by others. Also The radios made for the market Japan are known for this. I hope this helps you.

  • @zl1po844
    @zl1po844 Год назад +3

    Note: the jumper numbering is labelled on the circuit board,to the right of the jumpers.
    My radio had factory jumpers on 1 and 8.
    I really did enjoy your witty explanation,
    Thank you sir from New Zealand.

  • @toddshook1765
    @toddshook1765 Год назад +2

    Thanks for the demo. Love your outlook and sense of humor.
    Just picked up a 897d from our radio net auction with FC30 tuner. Just wanted to see how involved mod is.

  • @SilverBeardGuerilla
    @SilverBeardGuerilla Год назад +4

    And people wonder why the 11m DX community love HAM radios . 90% of the operators I know run modded 10-12m radios or expanded Yaesus and Icoms . I've always found it funny how the manufacturers will build them this way with all the shitty regs involved , add some jumpers or a resistor , cut a jumper here or there and BAM . My newest radio is a AT6666 and all I had to do was push a couple buttons in the menu , smh , like a big old middle finger in the face of the FCC .

  • @ampedupelectronics
    @ampedupelectronics Год назад +1

    The blob doesn't need to be large and has no affect on performance on size...add SMD291 flux, for the chip resistor removal -- it will save you shaving off the PCB traces if you are a brute or don't have enough heat and is generally good practice.

  • @GeorgeBartholomew
    @GeorgeBartholomew Год назад +2

    Great video! Thank you. Where did you get the side rails for the FT-897? I've been looking high and low for a set!

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Год назад +1

      Portable Zero is the name of the manufacturer.

  • @dang2157
    @dang2157 2 года назад +1

    I like the video and your viewpoints!!!

  • @thepesh
    @thepesh 8 месяцев назад +1

    Hello Lee - can you tell me where i find this outside frame [installed on this radio]?

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  8 месяцев назад +1

      Portable Zero. Not sure if they still make this one or not though. They still have one for the 819/857 though.

    • @thepesh
      @thepesh 8 месяцев назад

      Thank You - if have in stock i hope sending to UK.

  • @onedeadtony
    @onedeadtony Год назад

    Hey, kinda related, I blew the f 1001 fuse for the CAT putting a panadaptor board in her. Do you have a resource for those? Google can’t find any

  • @onedeadtony
    @onedeadtony Год назад

    Hey Lee, a follow up on my Japanese model 897 mars mod. I don’t think it’s possible. RUclips won’t let me post a picture for you, but the configuration is different and one jumper is non existent. Anyways, just fyi, hope all is well

  • @ampedupelectronics
    @ampedupelectronics Год назад

    Power is really low on Business band did you confirm the power out of band?

  • @onedeadtony
    @onedeadtony Год назад +1

    Hey Lee, do you have any knowledge of if this would work on the Japanese model of this radio? The model that has reduced tx range and wattage? Thanks

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Год назад

      If I recall correctly, I have read that the mods for the Japanese model are different, but I don't have any direct experience with that one. And I may be misremembering.

    • @onedeadtony
      @onedeadtony Год назад +1

      @@Lee_Adamson_OCF hey! Thanks for responding! I enjoy your “color commentary “ immensely! I’ll let you know how it goes!

  • @pleasetryme
    @pleasetryme 2 года назад +1

    Thankyou for this video i can confirm it works on a 897-d at first i didnt work because the operating manual explains 3 ways to do resets vm+ pwr or f+pwr or home+pwr the home +pwr does a full master rest and over rules the other 2 but the magic secret was the F+VM+PWR and THIS WORKS your a legend

  • @ICONDLS
    @ICONDLS 7 месяцев назад +1

    How do you know if you have a Japanese version or US version radio?

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  7 месяцев назад

      I don't know. I suspect that you can probably tell from the serial number tag, but I don't have a Japanese version to compare it to.

    • @BobBob-il2ku
      @BobBob-il2ku 6 месяцев назад

      USA version will have a FCC id on the back tag sticker

  • @itrstt66
    @itrstt66 4 месяца назад +1

    why is it called mars/cap?

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  4 месяца назад +1

      The original TX expansion mods were for 2m radios, which made them cover the nearby Military Auxiliary Radio System and Civil Air Patrol bands (both of which aren't really in use much as far as I can tell other than for business band comms). Modern radios are capable of transmitting on a much wider range of frequencies, but a lot of us still call it a "MARS/CAP mod" out of habit.

    • @itrstt66
      @itrstt66 4 месяца назад

      @@Lee_Adamson_OCF fantastic