Repair bricked 70mai 1S (MIDRIVE D06)

Поделиться
HTML-код
  • Опубликовано: 24 июл 2022
  • These recovery files are universal for any version (Chinese or international) of MIDRIVE D06 (1 S). After the restoration, you can install the international firmware (link below) only you have an INTERNATIONAL VERSION.
    1. Copy these 3 files to the root of the memory card.
    drive.google.com/file/d/1pEaZ...
    2. Insert the memory card into 1S.
    3. Press and hold the service button. Look at the location. Do not pierce the microphone!
    3. Connect the power. The blue indicator light came on. You can release the button.
    WW firmware for International version (NOT CN):
    drive.google.com/file/d/1NEqQ...
  • ИгрыИгры

Комментарии • 98

  • @fratilaalexandru5119
    @fratilaalexandru5119 Год назад +5

    SOLVED!
    This didn't work for me, but after watching this video and reading the comments i had an idea that actually worked for me.
    - Dissassembly the camera, unplug the front cover (which has the speaker module attached) and after unplug the battery.
    - With the battery removed , i flashed the WW firmware for International version (you can use any SD card that support FAT32, i used a 2GB).
    - After that i saw the blue light and then the camera flashed.
    Now it's working again.
    Many thanks for the video and all the smart guys who commented on this video.

    • @metaruman333
      @metaruman333 Месяц назад

      Hi did you use only the FW_DR0008.bin WW version?

  • @romeopavoni
    @romeopavoni 11 месяцев назад +1

    Many thanks, your files and your methods solved my problem!!!

  • @edinhamid4274
    @edinhamid4274 Год назад

    Baru je jadi macam ni semalam selepas hampir 2 tahun pakai. nanti saya cuba kaedah ni. terima kasih saudara

  • @michaelmoskal4971
    @michaelmoskal4971 Год назад +1

    WOOW. This actually worked. Thank you so much.. I was updating my cam firmware, and after that it just got bricked, stuck on green light, no hotspot, nothing. Thought that i can throw it away, but this fixed it. Thank you so much.

  • @tayyarevideos
    @tayyarevideos 10 месяцев назад

    it worked, thank you. for those who would like to install the international firmware; just copy the bin file into the root without formatting the card after the first step and then power the device while pushing the reset button. finally, release the reset button when the blue light is on.

  • @시원한하늘
    @시원한하늘 11 месяцев назад +1

    I restored it. Thank you

  • @alessandrogiannotti8187
    @alessandrogiannotti8187 Год назад +1

    Thank you 👍🏻

  • @Koubic023
    @Koubic023 Год назад

    Perfect👏👏👏

  • @user-nm5ug7vt3y
    @user-nm5ug7vt3y Год назад +1

    Большое спасибо. Но почему-то не получалось с новой карты памяти на 64г и старой на 32. По итогу нашел старую на 8 и с нее все загрузилось. Через приложение обновился на последнюю версию и заговорил по русски. Все четко
    Еще раз спасибо😊

  • @junaldogaming_3230
    @junaldogaming_3230 Год назад +1

    works fine thanks

  • @ayoubeayoube6480
    @ayoubeayoube6480 Год назад +2

    thank you very much it worked i downloaded the files to the sd card and i reset the camera and now it works great

  • @MyCorlo
    @MyCorlo Год назад +1

    bro!! very thank you !! my cam relife.before is using engllish now using chinese good ! i like it.

  • @mehmetpolat6606
    @mehmetpolat6606 Год назад +1

    3 aydır torpidoda duruyordu sayende hallettik. 🙋‍♂️

    • @Bulent_51
      @Bulent_51 Год назад

      Nasıl hallettiniz benimkide sürekli yeşil yanıyor ne yapmam gerekiyor kardeşim bilgi veririmisin

    • @mehmetpolat6606
      @mehmetpolat6606 Год назад

      Videonun altındaki linkdeki dosyaları indirip hafıza kartına at. Videodaki gösterdiği şekilde reset tuşu ile yapabilirsin. Çok oldu hatırlamıyorum videoyu takip et sıkıntısız olur. Cihazda birden fazla reset yeri varı videoyu dikkatli izle ilk denemede benimde olmadı

    • @mustafasar4016
      @mustafasar4016 Год назад

      Beceremedik kanka. Bi yardımcı ol ya. Zip dosyaları çıkartıp mı atalım hafıza kartına yoksa zip olarak mı?

    • @ozkantuzemen
      @ozkantuzemen 7 месяцев назад

      @@mustafasar4016 çıkartıp root dizinine atman lazım.

  • @sandortofalvi9266
    @sandortofalvi9266 Год назад +1

    Hello everyone, it only works under FAT 32 and 8 GB. Thanks for the video

    • @szbkty
      @szbkty Год назад

      szia,
      hogy kisebb vagy nagyobb nem lehet a kártya?
      32-essel nekem nem ment.
      Ránézek egy 4-essel.

    • @sandortofalvi9266
      @sandortofalvi9266 Год назад

      @@szbkty Szia csak max 8 GB ig működik és fat 32 be formázd és akkor megy

    • @szbkty
      @szbkty Год назад

      @@sandortofalvi9266 Köszi szépen,
      egy 4gigás class 10 kártyát formáztam fat32-re, de így sem működik.
      Nálam nem flashelés soránt ment félre valami, hanem kint a kapocsiban, egyik napról a másikra egyszercsak nem működött.
      Lehet ez HW probléma.
      De azért köszi a tippet.

  • @txt3298
    @txt3298 11 месяцев назад

    you best

  • @DorKati
    @DorKati 10 месяцев назад

    hii i ordered 8 gb memory card and it still doesnt work
    any ideas??

  • @kevinpicur7739
    @kevinpicur7739 Год назад

    When I want to use this camera at the back to help me parking better,but what is on my right(at the back)it shows me on left...its mirroring screen...

  • @badmintonbad2502
    @badmintonbad2502 9 месяцев назад

    it worked for me. thanks....

  • @maasweerabangsa7431
    @maasweerabangsa7431 Год назад +1

    My cam "Midrive D01" always says "TF card is not supporting, please format or change". I have replaced a new SD card of 64GB. still same problem. please help to fix it.

  • @ArbazAbid
    @ArbazAbid Год назад +3

    not working for me, I can feel the reset button is pressed and I keep it pressed then plugged in the power but light stays green.

    • @lisabonQ3
      @lisabonQ3  Год назад

      Have the files been copied to the memory card? FAT32 card?
      If yes, then you have a hardware problem. This method eliminates the problem of incorrect firmware. For example, from a different version or a power outage during an update.

    • @Kashif.88
      @Kashif.88 Год назад

      ​@@lisabonQ3 plz guide how to copy files ?

    • @Kashif.88
      @Kashif.88 Год назад

      ​@@lisabonQ3 how to download files and from where ?

  • @hoangsonpham3798
    @hoangsonpham3798 Год назад

    I fixed my Cam. Thaks so much . But language is Chinese 😄

    • @lisabonQ3
      @lisabonQ3  Год назад

      If you have an international version, you can flash the international firmware. I added a link at the end of the description to the video.

  • @Hiperyon24
    @Hiperyon24 7 месяцев назад +1

    doesnt work for me... with or without the battery plugged

  • @peterlenka
    @peterlenka Год назад

    Ahoj. Podarilo sa mi tvojou pomocou znovu zapnut kameru,ale pri spojeni mi stale vypisuje:Connection failed, this device
    is not supported in the
    region, please contact the
    seller to replace. Nedá sa to nejako obísť?? Ďakujem

  • @nuripasa8095
    @nuripasa8095 Год назад +2

    I did all the operations. The light flashes blue then turns off. When I turn it on, the green light is on again and the problem persists. Not recording, stuck on green light.

    • @lisabonQ3
      @lisabonQ3  Год назад +1

      So you have a different problem... This method solves the problem with incorrectly installed firmware.

    • @nuripasa8095
      @nuripasa8095 Год назад

      @@lisabonQ3 I think my problem is different. I contacted 70mai and they sent me files and I installed the software using the same method. Still my problem is not solved I guess I need a new dash cam.

  • @emreyanmadn5351
    @emreyanmadn5351 Год назад

    I did everything you said. The blue light started flashing again. But when the installation is finished, unplugging and plugging the power cable again, it stays on the green light again. Why could it be?

    • @michaelmoskal4971
      @michaelmoskal4971 Год назад

      use reset button on the other side of cam.

    • @py8551
      @py8551 11 месяцев назад +1

      You have to remove the internal battery and plug the usb cable make sure u have the 3 repair files copied into SD card first. drive.google.com/drive/folders/1JHfAR5NuEaYSGJC_mRxYXCoqR0coN3ql

  • @PetrisorMXM
    @PetrisorMXM Год назад

    hi for this repair i need a 64 gb card or a 8 gb card

  • @zking5971
    @zking5971 Год назад

    After following the steps my 70mai 1S is still green and no sign of blue. Could there be another step that I’m missing?

    • @lisabonQ3
      @lisabonQ3  Год назад

      no. Show on the video how you do it and send the link here.

    • @py8551
      @py8551 11 месяцев назад

      You have to remove the internal battery and plug the usb cable make sure u have the 3 repair files copied into SD card first. drive.google.com/drive/folders/1JHfAR5NuEaYSGJC_mRxYXCoqR0coN3ql

  • @TaMaheTV
    @TaMaheTV Год назад +1

    Say the car is off and parking in the driveway. Would I be able to live view the dash cam on my phone while being inside the house? So I can see if there’s anyone outside.

    • @lisabonQ3
      @lisabonQ3  Год назад

      If the recorder is turned off, then you can't. Wi-fi is disabled in parking mode to save battery. But if it is turned on constantly in normal recording mode and a wi-fi access point is available, then you can. But I'm worried about your battery.
      Check out another model with online monitoring via 4G:
      ruclips.net/video/x5yuEj628o8/видео.html

  • @tobahita9062
    @tobahita9062 Год назад

    is there possibility to program the bios using CH341A?

    • @lisabonQ3
      @lisabonQ3  Год назад +1

      Yes. Use the same bin firmware, truncating the first 32 bits.

  • @PetrisorMXM
    @PetrisorMXM Год назад

    because the 64 gb is not fat32 but the 8gb is fat 32 can i use it for this flas

    • @lisabonQ3
      @lisabonQ3  Год назад

      Yes, an 8GB card is suitable.

  • @carmenalvarez1629
    @carmenalvarez1629 Год назад

    I follow this steps but the light remains in green and do nothing... help pls

    • @py8551
      @py8551 11 месяцев назад

      You have to remove the internal battery and plug the usb cable make sure u have the 3 repair files copied into SD card first. drive.google.com/drive/folders/1JHfAR5NuEaYSGJC_mRxYXCoqR0coN3ql

  • @ybrojak5423
    @ybrojak5423 Год назад

    How do you do that

  • @intrafego9721
    @intrafego9721 Год назад

    Ola alguém sabe me dizer qual configuração preciso fazer para conseguir compartilhar o vídeo da 70maiS com áudio para o whatsapp? Desde já agradeço

    • @koziwaga
      @koziwaga Год назад

      В Play Market есть программа , извините, но не помню название, которая меняет формат видео и звука по Вашему желанию. Я этим приложением менял формат видео записанного камерой SONY.

  • @satpritsinghsandhu
    @satpritsinghsandhu Год назад

    Sorry but this didn't worked for me, I got into this issue update from APP and it crashed the dash-cam.... something is fishy here 70mai intentionally sent the bricked update...

  • @olegderesh3623
    @olegderesh3623 Год назад

    Горить Зелений индикатор кнопка Reset не помогает просто светит зеленим цветом что делать

  • @jarbasferreira4819
    @jarbasferreira4819 Год назад +2

    Perfeito! tentei varias formas para corrigir o erro e não estva conseguindo usei até o arquivo da 70mai direto do site tambem não funcionou, só consegui resolver pelo aquivo FW_107cn_REPAIR.zip, disponibilizado aqui obrigado Danil K, agora o cartão de memoria tambem influencia no resultado tive que usar um cartão de 32gb para reconhecer o arquivo, Obrigado!

    • @fsaenergybrasil649
      @fsaenergybrasil649 Год назад +1

      a minha parou de conectar ta dando erro que de local nao suportado algo assim diz que nao esta disponivel no local, sabe me dizer oq e?

    • @darasouzacunha5319
      @darasouzacunha5319 Год назад

      Não consegui de jeito nenhum :(

    • @ariftoksoz9074
      @ariftoksoz9074 6 месяцев назад

      107cn dosya indirme linki silinmis nereden indirebiliriz

    • @ariftoksoz9074
      @ariftoksoz9074 6 месяцев назад

      Link please download

  • @LittleWonton64
    @LittleWonton64 Год назад

    it's still not working for me

  • @arvianalamsyah5998
    @arvianalamsyah5998 Год назад

    Please re-upload the video without music, i want to know what response of the camera

    • @lisabonQ3
      @lisabonQ3  Год назад

      Sorry, the video is without sound. After the firmware, it turns on as at the first start and asks for activation via the phone.

  • @juanm.galvan2469
    @juanm.galvan2469 Год назад +3

    Didn't work for me either, light stays green all the time :(

  • @drsameer514
    @drsameer514 Год назад

    Really helpful while my device told “insert memory card”?I followed instructions according to this video.

  • @_batonchik
    @_batonchik 4 месяца назад

    Hello bro! i doing all in FAT32 can u help me? Camera doesnt work :(

    • @lisabonQ3
      @lisabonQ3  4 месяца назад

      What is the problem? Can you explain in more detail? Можешь написать на русском, если тебе так проще.

    • @_batonchik
      @_batonchik 4 месяца назад

      @@lisabonQ3 Пожалуй на русском . Так как я живу в Украине у нас запретили на 2 года камеры когда ее достал она даже включилась попросила зарядку и в проге обновиться когда Обнова загрузилась она сказала Закачать? Я нажал ок. И все больше она не на что не реагирует только зелёный индикатор светиться при зарядке и все зделал как на видео но такого результата не дало попробовал другую флешку тоже не помогло( может ты делал что то по другому просто ситуация у тебя такая же

    • @lisabonQ3
      @lisabonQ3  4 месяца назад

      @@_batonchik проверь ещё раз, правильно ли ты все сделал. Карта в Fat32, лучше до 32гб. При нажатии сервисной кнопки, ты чувствуешь её? можно запросто спутать с микрофоном... Если все правильно, то нажимаем кнопку, потом подаём питание. Если все так и не помогает, то значит у тебя проблема в другом. Этот способ исправляет только неправильно установленную прошивку. Возможно у тебя что -то другое.

    • @_batonchik
      @_batonchik 4 месяца назад

      @@lisabonQ3 по флешка все четко они работают при нажатии как в видео я ее чувствую

  • @saadlouze4509
    @saadlouze4509 Год назад

    Not working for me Always Green

  • @koziwaga
    @koziwaga Год назад

    Дайте пожалуйста рабочую ссылку на файл прошивки☝🙏

    • @lisabonQ3
      @lisabonQ3  Год назад

      ссылка рабочая, только что проверил и скачал

    • @koziwaga
      @koziwaga Год назад

      @@lisabonQ3 я и через 4пда переходил и браузер менял, бесполезно, пишет , что удален или перенесен 🤦‍♂️

    • @lisabonQ3
      @lisabonQ3  Год назад

      @@koziwaga если скачиваете с 4pda, то необходимо зарегистрироваться и авторизоваться, чтобы скачать. Но зачем? Если в описании к этому видео есть ссылки на гугл.диск? Скачайте оттуда. Смотрите описание к видео!

    • @koziwaga
      @koziwaga Год назад

      🤦‍♂️спасибо, скачал, но увы 🤷‍♂️ не помогло... Горит зелëным... Видимо придется осваивать прошивку флеш-памяти...😮

  • @chibishine
    @chibishine 11 месяцев назад

    Help me please 😢
    I can't to do it.

    • @lisabonQ3
      @lisabonQ3  11 месяцев назад

      What exactly are you failing at?
      This method only solves the problem of incorrect firmware installation. If you have a problem elsewhere, it won't help.

  • @user-iw1cd1si5o
    @user-iw1cd1si5o Год назад

    Где скачать файлы для восстановления?

    • @lisabonQ3
      @lisabonQ3  Год назад

      описание к видео....

    • @user-iw1cd1si5o
      @user-iw1cd1si5o Год назад

      Спасибо! попробовал свой раскирпичить по вашей инструкции, бесполезно. Куда дальше копать подскажите?

    • @lisabonQ3
      @lisabonQ3  Год назад

      @@user-iw1cd1si5o что происходит и как ведет себя регистратор при включении с зажатой кнопкой и файлами на карте? Запишите видео и подробно расскажите что у вас происходит лучше в теме на 4pda 4pda.to/forum/index.php?showtopic=958833

    • @user-iw1cd1si5o
      @user-iw1cd1si5o Год назад

      @@lisabonQ3 вобщем, сама по себе прошивка от 30.07.22 кривая, с горем пополам получилось по вашей инструкции откатиться назад, пробовал снова обновить, таже самая история.

  • @krzwin2806
    @krzwin2806 Год назад

    nie działa :(

  • @user-iv5cw8zr2v
    @user-iv5cw8zr2v 9 месяцев назад

    У меня просто синим горит

    • @Demonstok1989
      @Demonstok1989 6 месяцев назад

      Смогли решить? У меня постоянно плавно мигающий синий.

  • @hitone8268
    @hitone8268 Год назад +6

    This is mic. Not reset button 😂

    • @lisabonQ3
      @lisabonQ3  Год назад +6

      Are you serious? Why are you showing your stupidity? 🤦‍♂
      The MIC is on the same side on the left, just below. The RESET button is on the other side. In the video, I click on the SERVICE button...

  • @kolomeec1982
    @kolomeec1982 11 месяцев назад

    Хотя бы прокомментировал что делаешь то.

    • @lisabonQ3
      @lisabonQ3  11 месяцев назад

      Все поняли, а ты один не понял... Для особо одаренных есть описание к видео.

  • @phungsendi8068
    @phungsendi8068 Год назад +1

    Terimakasih bro ,1s saya bisa hidup dan berfungsi lagi
    Setelah hidup upgrade firmware lagi ke versi Inggris
    drive.google.com/file/d/1x36vPYaEcD7De4vrlmT4LXjM7czoSizv/view