How To Add Electric Start To A Snowblower
HTML-код
- Опубликовано: 15 окт 2024
- amzn.to/2DAEp9I Tecumseh Electric Starter Kit
amzn.to/2CtqtyP Tecumseh Replacement Carburetor $13
amzn.to/2EhAkbn Lift table for small engine work
amzn.to/2CrsNGE SAE & Metric Tap and Die Set
amzn.to/2ElrbP1 Torx Screwdriver Set Craftsman
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.
amzn.to/2DAEp9I Tecumseh Electric Starter Kit
amzn.to/2CtqtyP Tecumseh Replacement Carburetor $13
amzn.to/2EhAkbn Lift table for small engine work
amzn.to/2CrsNGE SAE & Metric Tap and Die Set
amzn.to/2ElrbP1 Torx Screwdriver Set Craftsman
Nice job bud.👍 I’m doing the same thing to mine this weekend. I picked up a good used starter from a local small engine repair shop for $25 bucks and the snowblower it self was only $60 bucks on letgo. It’s a 1995 MTD 5hp 22” self propelled 2 stage blower and thanks to your video it will now have electric start and I only spent $85 bucks total. 👍👍👍
I have the same blower and the engine doesn't like to start in the cold for me. Your electric start kit end up working - so old I can't really find good info.
Great install. I haven't had any blowers come in where I can keep the starter. I think the factory uses thread forming screws on the two 1/4 inch holes. I used thousands in my old career mounting equipment on relay racks with no threads.
I have a 1990 toro snowblower with the same engine but does not say ready for electric starter but I'm just going to notch the sheet metal so the gear engages properly. It does have teeth on the flywheel and mounting holes as you showed! Thanks for the proper part number I need!
Thank you so much for this video. It was so useful to install the electric start to my snowblower so precisely. Especially the thread tapping tips was great
You inspired me to install an electric starter on my blower. Just ordered a used one off ebay. Thanks for another great video!
Use a bottoming tap on the blind hole after using the starting tap, if you have one. Great video. Cheers
Nice. I recommend loctite in the bolts holding it on. They tend to vibrate loose.
Pretty neat...I had no idea they sold a kit like this. Those belt sanders come in handy for knife sharpening. Thanks, Bob and Happy New Year, Man!!
Merry Christmas
Hi I installed an electric starter on my 8/24 TORO from a 7/24 TORO. It worked great on the bench but for some reason it is not engaging with the flywheel. It was an easy installation but can’t figure out if I did something wrong. Looking forward to your feedback/guidance. Regards
Nice video man. Never seen a snow blower before (cause I’m in Mississippi haha)
Thanks a ton for the video man! This was very helpful!
Good Job Bob. The plywood on your harbor freight 1000 LB lift table is 3/4 or 5/8 or what?? Do you think a thinner piece would hold up? Also what would think about sealing it. I just picked up on of the tables but haven't got the plywood yet.
Good job, happy new year.
I inherited a snowblower. It has a pull start, that is hard for me. It's also old. But on the panel there is a hole that says electric start. So it looks like at some point there was a button or something for an electric start but I have no idea where it went. No wiring under hole either. Does this mean it can be converted?
Do you have to remove the pull cord? My pull cord broke, should I remove it?
Great tutorial video.
Great job Bob, happy new year to you and your family!
The starter depicted at Amazon looks a little different than the one in the vid; no shroud over the drive gear. Will it still work good?
The link given for the kit from Amazon now shows it's for the higher HP engines,
Industrial Applications with Tecumseh Engines
Tecumseh Snow King Engines
USED ON 8HP THRU 13HP ENGINES - TECUMSEH MODELS HMSK80 THRU 105, AND OHSK110 THRU 13
TECUMSEH ENGINE HM100-159106L
TECUMSEH ENGINE HM100-159129L
TECUMSEH ENGINE HM100-159138M
TECUMSEH ENGINE HM100-159138N
TECUMSEH ENGINE HM100-159138P
TECUMSEH ENGINE HM100-159138R
TECUMSEH ENGINE HM100-159159N
TECUMSEH ENGINE HM100-159159P
TECUMSEH ENGINE HM100-159193R
TECUMSEH ENGINE HM100-159208R
TECUMSEH ENGINE HM100-159209R
TECUMSEH ENGINE HM100-159211R
TECUMSEH ENGINE HM70-132000
TECUMSEH ENGINE HM70-132000A
TECUMSEH ENGINE HM70-132000B
TECUMSEH ENGINE HM70-132000C
The one in the video is a 5HP one, so it seems the link is no longer correct for the smaller engines.
Best video ever,thank you
I realize this video is a year old but im hoping you are still replying to comments. I bought an old MTD 5/24 snowblower today that the guy thought had a blown head gasket because it has a severe oil leak. Knowing there is no oil in the head on these motors i snatched it up for dirt cheap. Got it home and found it was leaking oil from the breather tube. I changed the oil and pulled the bowl off the carb to make sure it didnt have a stuck float that caused fuel to seep past the rings. I got it back together and its still leaking oil from the tube, pretty badly too. It got dark so i gave up for the night but plan to pull the crankcase vent apart to check for blockage somewhere. I also noticed there is no air filter or housing. Any input would be much appreciated. I haven't worked on many small engines so im unsure if im even going in the right direction.
Great video Bob . Have a great new year you and your family.
Very nice work DW6, thanks for the video!
Will any snowblower starter work
I've got a snowblower with a plug in starter I'm wanting to convert it to a battery powered starter how would I do that
I am interested in how you made the sanders I need one but can't really afford a new one.
Nice job.Wish my old Gilson had one of those.
lwoodt1 pl neus
Good job, I have about 5 of these starter combos laying around, but so far in 10 years I haven't come across a snow blower that needed a starter or needed one installed, I got all the starter combos from my local junkyard for around 5 bucks a piece, and good job tapping, when I see someone tap with a power drill I always cringe.... LMAO
knighthawk86855 I’ll take one for my old ariens ST724! Shade tree want to try installing one myself. People around her want $150!
Jeremy Fowler yeah they go for 140 to 150 used around me too, its because it's a high quality electric motor, the windings are top notch.
knighthawk86855 yep. So no free one? Lmao. I’ll pay shipping. Ha
Jeremy Fowler no sorry.
knighthawk86855 no biggie! Didn’t hurt to ask! Haha
great video , nice job, you make it seem so easy. Happy New Year
I wonder if you can find a way to add a battery engine starter. I can not find a starter that uses battery instead of 110v
Can I put an electric start switch on 60 year old snowbird
Thanks bro. Great video.
Don't use a longer bolt for the top one it can damage the cylinder wall if it bottoms out.
what it doesn't have the decal. becaues on my john deere 828d There is no decal that has provisions for electric start
I know where it mounts and everything. but should I put the electric starter kit on or not?
nice tip with the paper trick! thanks.
Hi. I’m Klaas. I have John Deere Sabre 16/42. 1998 .Q. is how do. The rubber. Caps on axle cap. Come off so I. Can the. Rim. Tire off ?
Awesome video..ive often wondered about this..thanks
do you have a video for honda hs928 oil change
Great job happy new year.
Thanks!
Good job on the video, thanks
😎🇺🇸👍 Nice install works great! Happy New Year 🎆🎊🎈
Great little vid!
Great video. Turning to the left until you hear it click is called, "jumping the box". I'm on a first name basis with the dinosaur's so I have to feel it jump the box.
Please do a predator w/electric start kit from eBay.
what if my starter just spins and never engages
Does the gear on the starter extend when power is applied to it? Was it working before or is it a new installation? Maybe the wrong starter if it can't reach the flywheel.