Put my configuration (only for GT3 or road car): Simpro Settings: FFB 100% Smooth: 0 (or 1) Wheel Rotation Speed: 3 (important item) FFB detail: 10 (1 to 20) Torque Limit: 15Nm M damper: 10% M friction: 15% (over 20 % will cause to robotic) M inertia: 0% Interpolation: 0 (or 1 if you feel to grainy) in Game Settings (911 GT3 R 992): Black box FFB 40Nm
hello I deactivated it as you showed, but the ffb gets worse, it's not like it was before, I feel some strange noise with this new update, when I deactivate it, I set both lines to 0, the noise gets worse
I think, your 360hz is still being activated after changing both lines to 0. I felt the difference when I wanted to try out the 360hz. I did not like it & set that both lines = 0. I felt the change after joining the session. I like the feeling before the 360hz. Maybe after changing those line to = 0, Do a PC restart.
@@surrinsg thanks I restarted the PC to base... and when it reached 0 it got ridiculously bad and it didn't solve the problem. in 1 activated I feel a graininess, when stopped turning the steering wheel from one side to the other, I even tested the acc thinking there was a problem with my simagic 15nm base
@@GustavoXimenesRace I am thinking something got screwed up for you after the patch. To elimate the issue, I would do a fresh IRacing re-install & also Simpro 2 re-install. Do revert back if problem still persist. Just to check, you are running simpro latest version not beta simpro.
@@SticksAandstonesBozo You should feel a difference in the wheel, like feedback on bumps is different from your previous wheel before the update. If you dont, check ini file if its = 1 (on) , 0(off). Save it & test again
I have the Alpha and the new update has made what was a great wheel into a piece of $hit. It no longer feels and planted to the road and feels like is floating above the road surface.... I did the app.ini adjustment and then had to do a league race last night at Spa and the first 2/3rd of the race it felt like it had zero ffb and i was 3 to 4 secs of the pace what i normally could do..... (I actually did have some but if was super light), then towards the end of my race the ffb kicked in, but was not to its normal inputs and i picked up 2 to secs but still not feeling correct.. I presume the base was doing an update in the background while I was racing as the change happened when i pitted. After taking fuel and tyres the car dropped off jacks and I could change gears, and move the wheel but the game would not release me from my pit box for about 25 secs. When it did I had stronger ffb... Did a complete uninstall and reinstall after the race and it got better again, but its still so flighty under change of direction or even heavy breaking.... What a balls up from Simagic to release such a update without a patch to fix and return setting to where we would normally have them.
@@FART2767 Allow me to understand, Are you using the 360hz or have you disabled it it .ini file. From my understanding, Simagic has updated the wheel for 360hz, but IRacing was fixing a bug from it hence it got back in the latest patch. Are you using latest simpro2 software & which dd are you using? Alpha mini? For mine, Ini file was on =0 after the patch, I was feeling the same as before. I wanted to try the 36HZ and manually change it to =1. I did not like the 360hz and reverted back to zero.
@@surrinsg Hi mate. Thankyou for your reply. 360hz is enabled ie =1 in the app.ini file. I have the Alpha Base and Firmware is latest 193 and Simpro Manager is most recent 2.0.341 its going to take a lot of trial and error and be subjective to each user but something is definitely amiss at the moment.
@@FART2767 Hi mate, Am happy to reply & help if I can 😊. How about disabling the 360Hz in ini file to =0. Do you feel like your old setting before the 360Hz patch?
@@FART2767 exactly! It's not 100% correct, something is wrong I could feel it! My settings are to feel the car, quickly feel the escapes, the roughest and I could clearly see that this update is bad. If I leave it at 0 app.ini it gets much worse
my alpha feels amazing after the update with 360hz
@@lichunwang2601 That's great, guess it comes down to personal preference. 👍🏼
only mine fucked up hahaha
Put my configuration (only for GT3 or road car):
Simpro Settings:
FFB 100%
Smooth: 0 (or 1)
Wheel Rotation Speed: 3 (important item)
FFB detail: 10 (1 to 20)
Torque Limit: 15Nm
M damper: 10%
M friction: 15% (over 20 % will cause to robotic)
M inertia: 0%
Interpolation: 0 (or 1 if you feel to grainy)
in Game Settings (911 GT3 R 992):
Black box FFB 40Nm
@@lichunwang2601 Thanks, I'll test it!
@@lichunwang2601wheel rotation speed 3? or 30?
hello
I deactivated it as you showed, but the ffb gets worse, it's not like it was before,
I feel some strange noise with this new update, when I deactivate it, I set both lines to 0, the noise gets worse
I think, your 360hz is still being activated after changing both lines to 0. I felt the difference when I wanted to try out the 360hz. I did not like it & set that both lines = 0. I felt the change after joining the session. I like the feeling before the 360hz. Maybe after changing those line to = 0, Do a PC restart.
@@surrinsg thanks
I restarted the PC to base... and when it reached 0 it got ridiculously bad and it didn't solve the problem. in 1 activated I feel a graininess, when stopped turning the steering wheel from one side to the other,
I even tested the acc thinking there was a problem with my simagic 15nm base
@@GustavoXimenesRace I am thinking something got screwed up for you after the patch. To elimate the issue, I would do a fresh IRacing re-install & also Simpro 2 re-install. Do revert back if problem still persist. Just to check, you are running simpro latest version not beta simpro.
@@surrinsg thanks
I'm using the newest version yes pro
I'll try to reinstall everything, it was beautiful before the update
How do you know if it’s working or if you need to mess with the ini ?
@@SticksAandstonesBozo You should feel a difference in the wheel, like feedback on bumps is different from your previous wheel before the update. If you dont, check ini file if its = 1 (on) , 0(off). Save it & test again
I have the Alpha and the new update has made what was a great wheel into a piece of $hit. It no longer feels and planted to the road and feels like is floating above the road surface.... I did the app.ini adjustment and then had to do a league race last night at Spa and the first 2/3rd of the race it felt like it had zero ffb and i was 3 to 4 secs of the pace what i normally could do..... (I actually did have some but if was super light), then towards the end of my race the ffb kicked in, but was not to its normal inputs and i picked up 2 to secs but still not feeling correct..
I presume the base was doing an update in the background while I was racing as the change happened when i pitted. After taking fuel and tyres the car dropped off jacks and I could change gears, and move the wheel but the game would not release me from my pit box for about 25 secs. When it did I had stronger ffb...
Did a complete uninstall and reinstall after the race and it got better again, but its still so flighty under change of direction or even heavy breaking.... What a balls up from Simagic to release such a update without a patch to fix and return setting to where we would normally have them.
@@FART2767 Allow me to understand, Are you using the 360hz or have you disabled it it .ini file. From my understanding, Simagic has updated the wheel for 360hz, but IRacing was fixing a bug from it hence it got back in the latest patch. Are you using latest simpro2 software & which dd are you using? Alpha mini?
For mine, Ini file was on =0 after the patch, I was feeling the same as before. I wanted to try the 36HZ and manually change it to =1. I did not like the 360hz and reverted back to zero.
@@surrinsg Hi mate. Thankyou for your reply. 360hz is enabled ie =1 in the app.ini file. I have the Alpha Base and Firmware is latest 193 and Simpro Manager is most recent 2.0.341 its going to take a lot of trial and error and be subjective to each user but something is definitely amiss at the moment.
@@FART2767 Hi mate, Am happy to reply & help if I can 😊. How about disabling the 360Hz in ini file to =0. Do you feel like your old setting before the 360Hz patch?
@@FART2767 exactly! It's not 100% correct, something is wrong I could feel it!
My settings are to feel the car, quickly feel the escapes, the roughest and I could clearly see that this update is bad.
If I leave it at 0 app.ini it gets much worse