I’m 14 and bought and old 800 triple I got to ride it about 40 miles and it was spinning track the whole way from the torque we still have ruts in the pasture from it.
keep killing it. I really enjoy watching your videos. Your at 350k subs, which I think you deserve way more with the type of videos you make. Keep grinding and soon you'll be at 1 million.
your slippers are just perfect for welding in, don't you also just love when a glowing droplet of melting iron falls in-between your toes and stays there it's the best🙃
Build a outer bearing setup into a guard for the belt and jackshaft. Highly recommend some rear tire guards for your feet. No front brakes is a bad choice, if a rear tire blows at speed youll immediately be pulled to that side if you even think about using the rears. Just a thought.
@@jammerlupardi8782 you might want to both check your information and not risk someone else's safety. The only drag cars without front brakes are top fuel rail cars due to the extra long wheelbase. LITERALLY EVERYTHING ELSE DOES, INCLUDING MOTORCYCLE DRAGS.
So glad to see You back, that thing is gonna rip! I would like to think it should get into the low 6's in the 1/8th mile? Or do You specifically have a MPH/ E.T. goal for it?
mate that’s really turned out awesome i just did the trike conversion on a ct 125 damn it’s hilarious to ride keep the wicked build’s coming bro cheers
Perhaps you could overcome the limited cooling system by adding a second radiator?? We ran a 440 all day long, using two heater cores grpmsn old truck as radiators.... Worked like a charm😮
Dai bro Non vedo l'ora di vederlo finito sono troppo curioso di vedere quanto vaforte!6 un bravo costruttore, ho visto molte tue creazioni o modifiche ai mezzi, sono veramente eccezionali!! complimenti 💪✌️👍
Cant tell i you did in the video but if not a tip on tigging aluminum easier to lay a bead is to fit your parts where they fit corner to corner or in this case the caps diameter should be just a little bigger than the inside diameter about an 1/8" gap around +/- depending on thickness of material, oh and the biggest is make sure your in a comfortable position and pratice before welding to so not get stuck in uncomfortable positions, sucks lol...oh and speed dap, go,dap,go,dap...been a while for me i probably could tig aluminum for nothing now 😂..
What about if you added a turn buckle with a bearing block on each then bolt it on each end of the driveline to stop the flex that would also give you a mounting spot for its cage
The chinesium is most probably had many life cycles already, or the process is just sub par and leaves too much dirt in the material. Or they just mix and match whatever grades of aluminium and the result is some unweldable shenanigans. On another note, I think I haven't seen any other youtuber changing 2 stroke pipe orientations as much as you have :D Don't you prep the surfaces on the pipes when you weld?
In my younger years its all i rode was triple 2 stroke snowmobiles..absolutely love that sound❣️..brought back some memories hearing that 👍🏻👍🏻
I’m 14 and bought and old 800 triple I got to ride it about 40 miles and it was spinning track the whole way from the torque we still have ruts in the pasture from it.
Make sure you put a beefy clutch guard on that beast! I have seen those belts break and rip right through the aluminum footwell of a snowmobile.
Bro your welding has gotten so good! Sick build!
keep killing it. I really enjoy watching your videos. Your at 350k subs, which I think you deserve way more with the type of videos you make. Keep grinding and soon you'll be at 1 million.
Thank you!
your slippers are just perfect for welding in, don't you also just love when a glowing droplet of melting iron falls in-between your toes and stays there
it's the best🙃
Can't wait to see it running! I was missing your videos! 2 stroke forever!
This is a much better use of that engine's power band, than the offroader it was originally targeted for... Nice work.
Wow, that engine started on the first pull of that starter cord.
Your skills are from another world man!
Vasily make a colaboration with rather b welding, it will be awesome to combine your skills
The Beast roars to life ! Glad you're ok.Had wondered what was up.Seeya next time.
Nice build you should put a banshee engine in a off-road gokart like a yerf dog or Murray
Been looking forward to this day!
Glad you’re feeling better
looking good on that Tig
Progress 👍
That should rip pretty good. Anxious to see it's first run.
Seat needs a little kicker at the rear to keep you on!
Build a outer bearing setup into a guard for the belt and jackshaft. Highly recommend some rear tire guards for your feet. No front brakes is a bad choice, if a rear tire blows at speed youll immediately be pulled to that side if you even think about using the rears. Just a thought.
Dragsters don’t have front brakes….It’ll be fine.
@@jammerlupardi8782 you might want to both check your information and not risk someone else's safety. The only drag cars without front brakes are top fuel rail cars due to the extra long wheelbase. LITERALLY EVERYTHING ELSE DOES, INCLUDING MOTORCYCLE DRAGS.
So glad to see You back, that thing is gonna rip!
I would like to think it should get into the low 6's in the 1/8th mile?
Or do You specifically have a MPH/ E.T. goal for it?
6-7 🤞
Absolut sick build man. Greetings from Germany 🤙
Looking good dude!!!🤗🤗🤗
Cool quad bro
Find some evinrude v8 for cheap and try to repair it and see how its built, i think that kind of video would be cool
Getting to the loud part; vroom or kaboom! More awesome to come!
mate that’s really turned out awesome i just did the trike conversion on a ct 125 damn it’s hilarious to ride keep the wicked build’s coming bro cheers
Trop belle les soudures 😎
When you are getting noticed you get busier with potential sponsors. Or collaborations with your peers. Success has its rewards and drawbacks.
Sounds nice. Well done Mr 😎
Great video you should race cars and cameras guys when your done !
This thing is gonna be sick!
Can’t wait to see the test drive
Vasily! PMT makes grom slicks rated for 95~ mph!
Perhaps you could overcome the limited cooling system by adding a second radiator?? We ran a 440 all day long, using two heater cores grpmsn old truck as radiators.... Worked like a charm😮
Cant wait to see it wheelie in the power band! Maybe..
Dai bro Non vedo l'ora di vederlo finito sono troppo curioso di vedere quanto vaforte!6 un bravo costruttore, ho visto molte tue creazioni o modifiche ai mezzi, sono veramente eccezionali!! complimenti 💪✌️👍
When do you plan to take it to the drag strip?
This thing will wheelie, so be prepared! :D
Cant tell i you did in the video but if not a tip on tigging aluminum easier to lay a bead is to fit your parts where they fit corner to corner or in this case the caps diameter should be just a little bigger than the inside diameter about an 1/8" gap around +/- depending on thickness of material, oh and the biggest is make sure your in a comfortable position and pratice before welding to so not get stuck in uncomfortable positions, sucks lol...oh and speed dap, go,dap,go,dap...been a while for me i probably could tig aluminum for nothing now 😂..
great work! love watching your videos.
Nice.
👍
shes a beast bro!!! cant wait to see her shred!!!
Lol golly this is nuts 😂
Can't wait to see it rip
What about if you added a turn buckle with a bearing block on each then bolt it on each end of the driveline to stop the flex that would also give you a mounting spot for its cage
Beyond badass
This guy is good!
@4:17 sure looks like you need to balance that front wheel!
man you love your smokers
Love/hate relationship
Sick!!!
🔥🙏🙌
Coolant return should go to the top of the radiator.
Awesome
It's bad ass
You're a good welder, challenge yourself! Make an off-road tank/RV, an apocalypse bug-out mobile that goes anywhere and zombie-proof.
What’s going on with the jet boat
Savage
Please put a belt guard on before riding it. I’ve seen what happens when those clutches and or belts come apart
The chinesium is most probably had many life cycles already, or the process is just sub par and leaves too much dirt in the material. Or they just mix and match whatever grades of aluminium and the result is some unweldable shenanigans. On another note, I think I haven't seen any other youtuber changing 2 stroke pipe orientations as much as you have :D Don't you prep the surfaces on the pipes when you weld?
Scorpa Trials Quad 4WD 72V
What ever happened to the jetski powered drift trike?
put some mufflers on it too
💪🤣
Atleast add some suspension 😂😂
Try a bigger rear sprocket
why CV?
Who was the dude in the gold chains😂
No clue , googled guy with lots of chains lol
Yo update on the new Chinese buggy
God love you but my neighboo would call in their frickin national guard if I made that much noise in my residential Southwest Erie neighborhood.
Show up and show out at turf wars
Why do you buy Chinese aluminum?
Amazon prime
@@VasilyBuilds 👍
Can you build one for me will pay please let me know
It's not ready to racee without a clutch
If it's Chinese it will be aluminum not aloominum
You shouldn't have got the jab kid!! Pine needle teas! Watch the center cylinder bro!
Don't forget Cherokee Hair Tampons.
Horrible 😂😂😂
Whoop!!!
I would of put the engines in the rear where your sitting and sit more up front where the engines are!? Makes more sense for drag racing!??
I wish to God I had a welder and knew how to properly use it, I would create some of the most other worldly stuff like this !