For those wondering where to buy a ''kit'', speedmotive sells it. the harness is 240ish, & taillights with harness is 500ish. What Car-lo did here is make it a whole lot cheaper! Nice work :)
@@ronandmelissa I don't know if you got it yet but I got them from ASM salvage in the UK. Or you can VPN to europe and go on ebay. I got a set for only 100 euro
Ty much! Been so long, but i remember getting called a "switchback led bulb" i tapped the reverse on the white led and yellow for the signal. Amazon have it.
Hello, how are you? Where can I buy this set of lights and the connectors that you show in your video? I'm from the country of Chile. Thank you very much and have a good day.
Hi Cristian, you can get the rear lights in ebay, and i bought "motorcycle connector" i think it was a 5 pins lights from amazon here in US. This is what i used looked like this 240Pcs/Pack Waterproof Car Motorcycle Auto Electrical Wire Connector Plug Kit Terminal Assortment 1 2 3 4 5 6 Pin Way with Blade Fuses www.amazon.com/dp/B07KP369MF/ref=cm_sw_r_cp_api_glt_i_WKGFP1HTDF203YRXHNTH
Vileak Thong i actually bought the plugs from amazon 5 prong motorcycle sockets it is a kit, that way it came out cleaner here is the link. I re-wire it to plug and play. QISF 240Pcs/Pack Waterproof Car Motorcycle Auto Electrical Wire Connector Plug Kit Terminal Assortment 1 2 3 4 5 6 Pin Way with Blade Fuses www.amazon.com/dp/B07KP369MF/ref=cm_sw_r_cp_api_i_sD5QEbPCEJ9NB
E Zma Tail Light Rear Lamp Right Fits ABARTH 500 Hatchback FIAT 2015- www.amazon.com/dp/B01DWE1CPC/ref=cm_sw_r_cp_api_i_vGrjFbTV6TCCJ MUYI 5 Sets 18AWG Waterproof Electrical Connectors Kit 1.5mm Series Terminal and Rubber Seal with 10cm Wire Weatherpack Connectors (4 pin) www.amazon.com/dp/B01A6M8CD8/ref=cm_sw_r_cp_api_i_fHrjFb2K3ZFJP Make sure get the left and right... buy the caps in ebay
oXStarKillerXo when i got them years ago, from Germany, but they are available now in amazon including the pigtail plugs ( it’s called motorcycle harness) with 5 prongs.
Man im in your same situation, old lights with bigger 5 pin plugs and have a set of new rear lights with small 4 pin plugs. I need to do exactly what you did here but i am a bit confused on how you wired the whole thing. Can you share some love and help a abartisti brother? i little diagram would really save my life. Thanks
I've been trying to locate the smaller connector that Fiat uses but so far the only thing I found is a £26.50 pigtail from Germany (which I am NOT willing to pay), so I think I will do what you did here, at least until I can source that connector. Have you come up with a reverse light solution yet?
Ele Truk I found all the plugs in ebay ship from hong kong took awhile, but havent put em on yet it was like less than 3 us dollars a piece including the pins. The reverse light is working with an led back up. I went ahead and used a non led on parking light easier and last longer the LED i put always burns out. So recap- led on turn signal, led on back up, incandescent bulb on parking light.
@@car-lo If you could post a link I would really appreciate it. I've got the connectors for the car side, but have no part number to search the light assembly side. For the insert I bought official touch-up paint (my 500e is the grey (grigio or "storm grey"), and found some clear reflective paint to spray over that.
Wolfgang Koeppen sorry bro been so long but most definitely you can get some of the plugs in ebay for cheaper couple of bucks, or if you want plug and play someone sells them close to $150 $200 bucks with the resistor.
Fidel Avila so sorry for the really late reply, Amazon has it, search for the abarth euro tail light, might be missing the caps tho. And these are the plugs CESFONJER 15 Kit Car Wire Connector, Waterproof Electrical Terminal, Plug for Auto Motorcycle Scooter Truck Marine Plug Socket Kit, 2 Pin × 5 Kit, 3 Pin × 5 Kit, 4 Pin × 5 Kit. www.amazon.com/dp/B07NY1R6L2/ref=cm_sw_r_cp_api_i_dyRnFb49K1WKY
I bought these with carbon inserts. Bought the pigtails and all. I ended up smashing them on my garage floor after they kept not working. I did it all correct as well.
Sekelee1 I ended up just using both incandescent and led for less resistors and only used one resistor for the signal blinker. The voltage on the factory is bizarre!
@@car-lo Were you getting bulb out error? I think I will try to go with 2 resistors, 1 for each signal wire. So 4 resistors for the entire taillight.... craaazy.
Broke&Boosted sorry when i made it years ago i had no resources then, now u can buy the plugs at amazon for cheap. I rewired it when the plugs became available.
Hi, it has been so long I had to redo actual harness called bicycle connectors so it plugs like oem, I put resistors to the signal led only and I used red incandescent bulbs on the parking lights.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
The harness is available cheap now...
CESFONJER 15 Kit Car Wire Connector, Waterproof Electrical Terminal, Plug for Auto Motorcycle Scooter Truck Marine Plug Socket Kit, 2 Pin × 5 Kit, 3 Pin × 5 Kit, 4 Pin × 5 Kit. www.amazon.com/dp/B07NY1R6L2/ref=cm_sw_r_cp_api_i_dyRnFb49K1WKY
Which Waterproof Electrical Terminal Option Is it?
what size resistors did you use and where did you get them from?
For those wondering where to buy a ''kit'', speedmotive sells it. the harness is 240ish, & taillights with harness is 500ish. What Car-lo did here is make it a whole lot cheaper! Nice work :)
yeah, for $250... that's more than the lights actually cost. NO THANKS.
Just wondering, I've got everything else ready to order but, would you be willing link what you used for the reverse LED?
This style is soooo much better.
Compatible avec une fiât 500 2010?
Bro put the link in the description. Nice lights. +10hp.
Were do you buy the new light please?
I think I would wrather go with the plug n play kit. Where do I get the lights and harness- nothing on ebay.
Just ordered the parts... looking forward to doing this mod! Thanks!!!
Luglio Caesar exciting times coming for yah!!
U will love the new look!
Would you please be so kind as to where you ordered them from. Id love to get a hold of some for 2017
@@ronandmelissa does it fit a 2017 tho?
@@ronandmelissa I don't know if you got it yet but I got them from ASM salvage in the UK. Or you can VPN to europe and go on ebay. I got a set for only 100 euro
Hi great video, can you send me the link for your reverse lights please ? many thanks
Ty much! Been so long, but i remember getting called a "switchback led bulb" i tapped the reverse on the white led and yellow for the signal. Amazon have it.
@@car-lo many thanks pal . Very much appreciated
@bafroggy my pleasure.
Hey Dude
What exact resistors did you need for the build and on what cables? just got lights and ordered the connectos
I ended up just using a resistor from Amazon for the signal led lights... as for the rear lights I used red incandescent bulbs.
@@car-lo how many? On each wire?
6ohm?(25watt)
U can do 6o 50 watts.... on each led bulb.
Hello, how are you? Where can I buy this set of lights and the connectors that you show in your video? I'm from the country of Chile. Thank you very much and have a good day.
Hi Cristian, you can get the rear lights in ebay, and i bought "motorcycle connector" i think it was a 5 pins lights from amazon here in US.
This is what i used looked like this
240Pcs/Pack Waterproof Car Motorcycle Auto Electrical Wire Connector Plug Kit Terminal Assortment 1 2 3 4 5 6 Pin Way with Blade Fuses www.amazon.com/dp/B07KP369MF/ref=cm_sw_r_cp_api_glt_i_WKGFP1HTDF203YRXHNTH
Thank you very much! You did help me more! 🙏
My pleasure Romulo, i actually re did the wire where it is plug and play now got the "motor cycle plug" online amazon or ebay.
The link of this product ??
Car-lo I'm in the middle of making my own rig basing it off your video. Any chance you can send us a diagram of what cable is what?
Vileak Thong i actually bought the plugs from amazon 5 prong motorcycle sockets it is a kit, that way it came out cleaner here is the link. I re-wire it to plug and play.
QISF 240Pcs/Pack Waterproof Car Motorcycle Auto Electrical Wire Connector Plug Kit Terminal Assortment 1 2 3 4 5 6 Pin Way with Blade Fuses www.amazon.com/dp/B07KP369MF/ref=cm_sw_r_cp_api_i_sD5QEbPCEJ9NB
@@car-lo I bought the same thing but I find the four pin in the kit doesn't fit. Did you have a remedy to that?
Wait did you buy original series 4 rear lights for 2015+ and connected it to series 3 or you bought kit for your fiat
I got the motorcycle kit in Amazon same as the fiat Oem plugs that they use awhile back, and water proof just like factory.
Hi, sorry where did you put the fog light??
Bea Torrecilla the rear fog light? US cars does not come with it? Only the front fog lights.
abarth has a destinated area centered like a formula 1 car lol
In the middle of the aero diffuser on the bottom
hello. can you share the link or did you buy the complete kit?
E Zma
Tail Light Rear Lamp Right Fits ABARTH 500 Hatchback FIAT 2015- www.amazon.com/dp/B01DWE1CPC/ref=cm_sw_r_cp_api_i_vGrjFbTV6TCCJ
MUYI 5 Sets 18AWG Waterproof Electrical Connectors Kit 1.5mm Series Terminal and Rubber Seal with 10cm Wire Weatherpack Connectors (4 pin) www.amazon.com/dp/B01A6M8CD8/ref=cm_sw_r_cp_api_i_fHrjFb2K3ZFJP
Make sure get the left and right... buy the caps in ebay
Car-Lo the lights arrived with the white central moldings?
Where can I buy these taillights
Vince Col when i bought the tail lights years back ebay germany. But available now in US ebay.
This is great I love the euro taillights better than the us one we get
Where did you purchase them? I wonder where I can get the from and rear bumpers from EU
oXStarKillerXo when i got them years ago, from Germany, but they are available now in amazon including the pigtail plugs ( it’s called motorcycle harness) with 5 prongs.
So now you have no tail reflector at all?
Petr Kaněčka since I did the mod I have a small round reflector in the diffuser. Not shown in the video.
Hello,
Did you mount the resistors in parallel with the LEDs or series?
rapture4rapture
Parallel, individual per LED.
That is so fucking sick. My black ‘16 has those old ones and been wondering how to convert them to the new ones.
What year is your fiat
Vince Col 2013 but all years should fit with this type of body or model.
I hope you still enjoy your car bro
Sloboz pe pâine I still do love it bro 😁 more projects to come.
Hi bro it will fit the us version abarth or not
Mohd Salem it will fit for sure! 👍🏼
Man im in your same situation, old lights with bigger 5 pin plugs and have a set of new rear lights with small 4 pin plugs. I need to do exactly what you did here but i am a bit confused on how you wired the whole thing. Can you share some love and help a abartisti brother? i little diagram would really save my life. Thanks
Sure, i can send you a video on my new set up, since this video was made, I made a more simpler wiring. And the harness is on the other comments here.
@@car-lo thanks man can you link the new video?
I've been trying to locate the smaller connector that Fiat uses but so far the only thing I found is a £26.50 pigtail from Germany (which I am NOT willing to pay), so I think I will do what you did here, at least until I can source that connector.
Have you come up with a reverse light solution yet?
Ele Truk
I found all the plugs in ebay ship from hong kong took awhile, but havent put em on yet it was like less than 3 us dollars a piece including the pins. The reverse light is working with an led back up. I went ahead and used a non led on parking light easier and last longer the LED i put always burns out. So recap- led on turn signal, led on back up, incandescent bulb on parking light.
@@car-lo
If you could post a link I would really appreciate it. I've got the connectors for the car side, but have no part number to search the light assembly side. For the insert I bought official touch-up paint (my 500e is the grey (grigio or "storm grey"), and found some clear reflective paint to spray over that.
@@car-lo I've looked, but haven't found the smaller connector. Do you remember what you searched for to find it?
Hey can you post the parts and a wiring diagram? this is something that I want to do, but I just don't know what to get
Wolfgang Koeppen sorry bro been so long but most definitely you can get some of the plugs in ebay for cheaper couple of bucks, or if you want plug and play someone sells them close to $150 $200 bucks with the resistor.
What's is the parts list
ramesh neerpat the tail lights i got from ebay germany 🤣 and the resistor is from amazon. Both parts are in amazon too.
How buy this please let me know or send me link pleases thanks
Sonido Pacheco Amazon has it, search for the abarth euro tail light, might be missing the caps tho
Love how you showed how to do it. Been wondering how to do something like this to mines. Got any links for the materials you used to make this happen?
Fidel Avila
Hi, I bought the LEDS, the resistors and the eagle eye individual LED from Amazon. I will gather the parts info soon. Thanks!
Car-Lo thank you so much can't wait for this to happen thanks!
Did you get a chance for the links?
Fidel Avila so sorry for the really late reply, Amazon has it, search for the abarth euro tail light, might be missing the caps tho.
And these are the plugs
CESFONJER 15 Kit Car Wire Connector, Waterproof Electrical Terminal, Plug for Auto Motorcycle Scooter Truck Marine Plug Socket Kit, 2 Pin × 5 Kit, 3 Pin × 5 Kit, 4 Pin × 5 Kit. www.amazon.com/dp/B07NY1R6L2/ref=cm_sw_r_cp_api_i_dyRnFb49K1WKY
I bought these with carbon inserts. Bought the pigtails and all. I ended up smashing them on my garage floor after they kept not working. I did it all correct as well.
Sorry to hear that brotha!
@@car-lo its ok i contacted these people in uk They make these for us vehicles with carbon inserts for less than $500.00
That is a nice touch, I made a carbon inserts at home base on the factory inserts.
@@car-lo Did you use pre-preg? MY old ones i ordered carbon inserts from uk.
Did you put the resistor on the constant on wire or the brake wire?
Sekelee1 I ended up just using both incandescent and led for less resistors and only used one resistor for the signal blinker. The voltage on the factory is bizarre!
@@car-lo Were you getting bulb out error? I think I will try to go with 2 resistors, 1 for each signal wire. So 4 resistors for the entire taillight.... craaazy.
Well done
Should have kept the inserts white.
Hi, at some point i did, but i wanted depth. Its wrap i can always remove it :)
where did you by these and how much?
Zac Crockett
Check around ebay,
And amazon.... Thanks!
Do you have a link where I can purchase the euro lights?
Carlos R
Hi, eBay or Amazon they are abit pricey bro.
MS Racing also carries a kit containing plug and play harnesses
okay too complicated to do myself ahhah
Someone sells the kit now for plug and play, after this video I'm sorry I didn't show the plug and play I made.
that shit looked confusing as hell!
Broke&Boosted sorry when i made it years ago i had no resources then, now u can buy the plugs at amazon for cheap. I rewired it when the plugs became available.
Please buy a tripod
Yes, i got a bunch, ill use them next time. Thanks for advise.
Hi did you put a resistor to the constant parking light as well as the brake light?
Hi, it has been so long I had to redo actual harness called bicycle connectors so it plugs like oem, I put resistors to the signal led only and I used red incandescent bulbs on the parking lights.