Fixing Up Husqvarna 326LS (Fuel Lines, Primer, Filter, Shaft and Trimmer Head)
HTML-код
- Опубликовано: 20 июн 2016
- Video on fixing up a Husqvarna 326LS I picked up for pretty cheap, and didn't take to much to get going. Thanks for Watching, and I apologize for not making as many videos and not keeping up with comments as good as I should!
Авто/Мото
Thanks for this tear-down. Mine needs only a new primer bulb but watching this really helped to see what involved with the replacement- thanks again!
Your welcome, Thanks for Watching!!!
Thank you for the great video. I needed this video in order to get the correct routing of the fuel lines. I appreciate learning how the primer works.
Your welcome, glad to help out. Thanks for Watching!!!
Can't beat free stuff, especially when it doesn't cost too much to fix. Great video !
nope, I don't have much in this project at all, just a few parts. I got lucky on this one! Thanks for Watching!!!
Thanks for making this! My fuel line broke off and I couldn't figure out which line went where. I had it completely wrong.
Your welcome, glad to help out! Thanks for Watching!!!
This helped me get my trimmer back running again, awesome video!
Glad to help! Thanks for Watching!!!
great instructions and easy to follow vid. thanks amigo..appreciate your knowledge and good work..
Great job and you made it look easy.
Thanks! i hear ya, Thanks for Watching!!!
Got this same weed eater. This video helped me get the gas lines back on properly. Thanks!
Glad to help out! Thanks for Watching!!!
You make it look easy, I never had any luck with these things.
Last year I bought a new Crafsman leaf blower and it is a SOB to start.
Last winter it would not even start so I could use it to blow light powdery snow off the cars.
It hate cold weather, $120.
I hear ya! Believe me, i just got lucky with this one, i don't usually have much luck with 2 cycles. Some engines are like that, who knows why. Might just need adjusted to run a little richer, they make new equipment run so lean its not even funny. Thanks for Watching!!!
That's a pretty decent trimmer and it runs great after you installed new lines and primer. I have one of Husqvarna's newest straight shaft residential trimmers, the 128LD that I bought brand new at Lowes, cost me $200. They had the high speed adjustment on the carb set too lean as it would hesitate when I gave it throttle, luckily though I have the special splined tool for adjusting the screws so I tuned the carb in myself until it ran smooth.
I love them, they are nice and light too. I hear ya, they tend to set all of them lean these days. Thanks for Watching!!!
Great video. I'm working on a 326L today/tomorrow , it needs a carb rebuild , New gas lines, and a fuel filter. it has been sitting in a neighbors building for several years
Thanks! I hear ya! Hopefully it will be like this one and thats all it needs! Thanks for Watching!!!
How’d it go?
Yep I know it was 2 years ago ...
Great job thanks
Sounds good
I have no idea what you said at the beginning of this video, at least not the first 10 words. So I switched on CC (closed caption) and even that thing didn't know what the hell you said! (play it back and see for yourself)
Since I replayed the first 4 seconds over and over and over again, I gave up. Now I hope to understand the remaining 13 minutes & 20 seconds. WISH ME LUCK!!!
Great video.
thanks for watching!!!
great info bud! I've never worked on a Husqvarna trimmer before. it turned out good.
Thanks! I hear ya. I've only work on a handful of them. I like them because they are so lightweight. Thanks for Watching!!!
I hear ya, they are nice. I know right, thats how it was when i got it back in winter. Appreciate that sub! Thanks for Watching!!!
cool thanks again for your best video fnaguitar great day
Appreciate that! Thanks for Watching!!!
Great video brother. Just picked up this exact model from a garbage pile. Missing a trim head but has good compression I’ll try all these things out
Thanks! I heard that! Thanks for Watching!
Thats a real fine trimmer. Been using one for about 8- 9 years or so.
They are nice, I did switch to Stihl, but I do like how light these are. Thanks for Watching!!!
@ Orlando Herrara ,
I've had my 326LS for 7 years. Recently the head would barely turn at full throttle. New plug. Cleaned the spark arrestor. Runs great sometimes then bogs down other times. Ever have yours do that?
@@ghosthk2935 no, mine still runs good mechanically. The only real issues is that when its been sitting in my truck in this Texas sun it won't start. That also happens with my Echo hand held blower.
What size fuel line did you use?
You have sold me on a Husqvarna trimmer.
I hear ya! I like them because they are so lightweight! Thanks for Watching!!!
Seems like that machine was meant to be yours. Great work resurrecting it.
I hear ya! Everything went pretty smooth with it. Thanks for Watching!!!
I've got a the shame weedwhacker. It is such a power unit , I dont want to let it go. Hahah. My flywheel went to shit . One of my botls unsrewed and ffailed it . I cant find any videos helping me to replace the flywheel. Any suggestions is greatly apperiacted . Thank you for your time.
Very nice repair and fix up. Just wish your camera work would have shown better where all the fuel lines went clearly in the end. I'm assuming one of those lines went back as a return to the tank but couldn't see. Anyways thanks for the nice videos !!!
Thanks! I hear ya, sorry about that. The black line went into the tank and hooks to the fuel filter, the yellow line went to the primer, then from there went to the tank (the return line like you said). Your welcome! thanks for watching!!!
How do you put the grease in there? I never done that. Maybe that’s why I have three trimmers and none of them work, haha. But I’m trying to learn how to fix them.
Most of them will have a grease fitting at the end on the gearbox, it only takes a couple pumps on a grease gun. some will just have a plug in them with a hex head, but it can be removed a grease fitting installed. Thanks for Watching!!!
Do u still use super tech oil
I've been using some havoline 2 cycle that was given to me, it seems to be pretty good stuff. The super tech smoked alot more. Thanks for Watching!!!
Your videos are real good. Where do you order your parts from?
Thanks! I get most of my parts from tulsa engine warehouse (tewarehouse.com) or off of ebay from various sellers and occasionally i'll stop by the local lawn mower shop if i need something in a hurry. Thanks for Watching!!!
Thanks
no problem!
That is crazy $6 for that choke lever.. However its a great little weeder that is for sure.
I know right! Just because of the brand. Yeah its been doing great! Thanks for Watching!!!
Can you do a video on how to spool one I have the hardest time doing it
Yeah, I'll make a quick tip video out of it as soon as i can, ill show a couple different setups. Thanks for Watching!!!
+fnaguitarplayer9 ok thanks!
No problem, i recorded it this past weekend, but I do have 1-2 videos I'm planning on putting up first, so just hang in there!
itll be a higher grade of plastic than your average abs, itll be a glass reinforced plastic part
True. Thanks for Watching!!!
That's because u mixed it at a 40 to 1 and not a 50 to 1
As a British person I have no clue what you were saying.
Your welcome
.
squeek
Yeah it did haha Thanks for Watching!!!