Best saddle stiching video... i learned how to saddle stich from other videos but didn't really understand why. This video explained the process clearly with different colored threads. Thanks.
The way that the blue thread was made to go under the red thread (by looping the red thread over the blue thread) is absolutely the correct way to proceed, and actually DOES create a half-granny knot which is hidden unseen inside hole, and makes the stitching much more snug and loosen-resistant as you proceed. (It is the half-knot that actually makes the thread leave the holes at the desired angles.) Notice that the back side of the stitching is rather straight and not particularly in a Z pattern, even though the sewing symmetric on both sides. (If a proper Z pattern is desired on both sides, then naturally the Z-pattern pricking iron or chisel should be used on both sides.)
I've never ever worked with leather green as z frog. Is The reason you don't Go allway through material Like some so As One side has a different appearance awle opposed to punch?
Хм пожалуй надо попробовать .Я шью без "узелка " внутри и шов получается равномерным прямым . Интересно попробовать сочетание разных цветов нитей -как-то не приходило в голову попробовать так шить.
Because these are pricking iron as opposed to stitching chisels. The tines on the pricking iron are much finer, so the leave a smaller cut in the leather that is meant to be used as a guide for the diamond awl. The awl will then easily cut through the leather and finish the hole with out stretching out the leather as much. if you used the pricking irons to make the full hole, you would run the risk of snapping the tines off over time because the are so thin.
@@TandyLeatherCo thanks for the video first of all.. I have one question, since I have been sewing on a gray machine for years, I have learned that the smaller the number, the thicker the thread and vice versa... I'm interested in hand sewing thread, for example, is 0.55 thread thicker than 0.8mm thread? and what is the equivalent of, for example, thread 0.6 mm, is it similar to thread 10 for sewing on a sewing machine, or is it an approximate thickness? sorry for the long question..
Check J.H. Leather...she has the most amazing videos on this, she gets every angle so you can see EXACTLY how it works. Plus she's English and really hot so it makes for a much more enjoyable video LOL.
Best saddle stiching video... i learned how to saddle stich from other videos but didn't really understand why. This video explained the process clearly with different colored threads. Thanks.
Your videos are timeless. Thank you!
Love the video I appreciate the fact that you used a red and blue thread so that it was very easy to follow your technique very informative
Thanks for sharing your experience! I like that different colors are used in sewing, it's easier to understand! 👍
Great Video.Thanks.
Wow -- that was an excellent demonstration!
The way that the blue thread was made to go under the red thread (by looping the red thread over the blue thread) is absolutely the correct way to proceed, and actually DOES create a half-granny knot which is hidden unseen inside hole, and makes the stitching much more snug and loosen-resistant as you proceed. (It is the half-knot that actually makes the thread leave the holes at the desired angles.) Notice that the back side of the stitching is rather straight and not particularly in a Z pattern, even though the sewing symmetric on both sides. (If a proper Z pattern is desired on both sides, then naturally the Z-pattern pricking iron or chisel should be used on both sides.)
Thank you for the good and very clear explanation
Thanks Sooo Much! I saw a video of a Louis Vuitton being made using these techniques! Hey I can do This ! Thanks!
I've never ever worked with leather green as z frog. Is The reason you don't Go allway through material Like some so As One side has a different appearance awle opposed to punch?
Liked the video. 👍🏻🤙🏻
Where did the blue thread come from?
Хм пожалуй надо попробовать .Я шью без "узелка " внутри и шов получается равномерным прямым . Интересно попробовать сочетание разных цветов нитей -как-то не приходило в голову попробовать так шить.
Im confused as to why we dont punch the stitching holes all the way through at the beginning?
Because these are pricking iron as opposed to stitching chisels. The tines on the pricking iron are much finer, so the leave a smaller cut in the leather that is meant to be used as a guide for the diamond awl. The awl will then easily cut through the leather and finish the hole with out stretching out the leather as much. if you used the pricking irons to make the full hole, you would run the risk of snapping the tines off over time because the are so thin.
Thank you
Thanks, now i gut it right :)
I've been saddle stitching and back stitching leather for years and I found this video very confusing.
What brand pricking irons are you using?
Our TandyPro® line: tandyleather.com/collections/since-tools.
@@TandyLeatherCo thanks for the video first of all.. I have one question, since I have been sewing on a gray machine for years, I have learned that the smaller the number, the thicker the thread and vice versa... I'm interested in hand sewing thread, for example, is 0.55 thread thicker than 0.8mm thread? and what is the equivalent of, for example, thread 0.6 mm, is it similar to thread 10 for sewing on a sewing machine, or is it an approximate thickness? sorry for the long question..
You're a treasure
If you play it double speed it's watchable, otherwise it's a great sedative...either way
Man, people have no attention span anymore.
Tandy can't afford two cameras? Maybe even a third camera from above?
Check J.H. Leather...she has the most amazing videos on this, she gets every angle so you can see EXACTLY how it works. Plus she's English and really hot so it makes for a much more enjoyable video LOL.
Why do I subscribe and the symbol continue as unsubscribed, please?
Let's just say there's better videos then this