Another great watch. In the past when I've done vinyl work I found using masking tape along the top (so its half on half off) if its a long length slice halfway but leave it in situ, then lift the vinyl up off the backing then squeegee down once backing is removed makes it a little easier but looked great nevertheless. Lovely job on drums and centres. It's these small jobs that make a car aesthetically pleasing on the eye that can add £££s.
TOP BANANA MATE JUST BOUGHT MYSELF A 107 .got rid of low mile diesel Megan’s absolutely love the 107 it just makes me smile enjoyed your vids mate thanks for sharing them
i Love your vids mate!, I also own a C1 (2013 Collection Edition, black color, pre-facelift), and am really fond of that little one as well :-) i also am 'pimping' it with side-stripes, hood-stripes (all in a bronze/gold color), Decepticon logos (cause a friend of mine called it a little black evil Transformer car once haha), bronze/gold hupcaps and some more subtle little stripes under the tail-light units)...also stuck some carbon fiber on the headlights to give it a 'serious' look at the front (lets call it 'eye-brows'). So really cool to see you 'facelifting' yours 🙂 Citroen-greetz from Holland (oh and you got a new subscriber from now on ;-))
Hi mate, thanks for the message and support ! Sounds like you have got a nice little project on the go ! They are great fun, glad you like the vids and thanks for subscribing ! All the best MEC 👍👍👍
Hi mate, thanks ! Glad you like the channel, Im not sure on those wheels, it all depends on the spec, 15" will fit fine but you need to get the correct offset which is 38, the offset can be slightly less but not to much otherwise the wheels will stick out to far, hope this helps, Regards MEC
Hi mate sorry for the delay in replying, they have Manahay euro edition on the back, made in china and a number of WK-139, they are 15x6.5j and offset of 38 Hope this helps 👍👍
What a grand job you have done pal! You've transformed a basic little car into a very nice citybug. I was wondering, what is the make and size of the wheels you used?
Another great watch. In the past when I've done vinyl work I found using masking tape along the top (so its half on half off) if its a long length slice halfway but leave it in situ, then lift the vinyl up off the backing then squeegee down once backing is removed makes it a little easier but looked great nevertheless. Lovely job on drums and centres. It's these small jobs that make a car aesthetically pleasing on the eye that can add £££s.
Thanks mate glad you like it ! Some great advice there thanks ! 👍👍👍
I can't believe how well them drums came up , looked like new .
Hi ! Thanks ! glad you like em ! They look great through the alloys rather than rust haha 👍
i gotta install my aygo side decals soon....thanks for all the tips buddy
Awesome, glad to be of help, good luck 👍👍
This little C1 has come on so well. Great job, or should I say " TOP BANANA"
Thanks mate ! Deffo a Top banana 😉👍👍👍
TOP BANANA MATE JUST BOUGHT MYSELF A 107 .got rid of low mile diesel Megan’s absolutely love the 107 it just makes me smile enjoyed your vids mate thanks for sharing them
All the little things sure ad up! Looks really nice
Next episode putting a turbo engine in the little C1.... 😄
Thanks mate ! Think the wheels might fall off if i turbo'd it 😉🤣🤣🤣
@@mec-tec nah just get someone adventures to drive it the first time 😄
Very nice job!
I know if I did this I would have made a mess of the decals, just like the screen protectors you buy for your mobile phone!
Thanks mate ! Yes they are a bit tricky but came out good i think 👍👍👍
Hi Mec - another great video - really enjoyed watching it - like the stripes too D
Thanks wak ! Glad you like it ! 👍👍👍🔝🍌
Looking better every video
Thanks so much ! Glad you like it 👍👍👍
Very nice build 👍
Thanks mate ! Glad you like it 👍👍
i Love your vids mate!, I also own a C1 (2013 Collection Edition, black color, pre-facelift), and am really fond of that little one as well :-) i also am 'pimping' it with side-stripes, hood-stripes (all in a bronze/gold color), Decepticon logos (cause a friend of mine called it a little black evil Transformer car once haha), bronze/gold hupcaps and some more subtle little stripes under the tail-light units)...also stuck some carbon fiber on the headlights to give it a 'serious' look at the front (lets call it 'eye-brows'). So really cool to see you 'facelifting' yours 🙂 Citroen-greetz from Holland (oh and you got a new subscriber from now on ;-))
Hi mate, thanks for the message and support ! Sounds like you have got a nice little project on the go ! They are great fun, glad you like the vids and thanks for subscribing ! All the best MEC 👍👍👍
Big fan of the channel would you know if Fox Racing R4 15” Alloy Wheels would fit my 2009 c1
Hi mate, thanks ! Glad you like the channel, Im not sure on those wheels, it all depends on the spec, 15" will fit fine but you need to get the correct offset which is 38, the offset can be slightly less but not to much otherwise the wheels will stick out to far, hope this helps, Regards MEC
@@mec-tec thanks for the help so I’m looking for 38 offset is that the main thing to look for to make sure they fit?
Another great video has always
Thanks mate ! 👍👍👍👍
Would 15inch MR2 alloys fit on a C1 with the offset of 35?
Hi, i would think so, the original offset is 38, so they will stick out slightly further but should be ok
Hope this helps, regards MEC
Hi! Did those 195 wheels fit without a problem or did you need a spacer?
Hi yes they fit straight in with no spacers 👍👍
@@mec-tec Thanks mate!
Definitely looks the business now ! 👍🏻Racing strip up the bonnet and roof next, adds 4MPH so I’m told. 🔝🍌
Thanks Bob ! Yes i think ive added at least 20bhp with the side stripes 😉🤣🤣👍👍🔝🍌
Any idea of part numbers on the rims did you notice ? or name. I cant find them anywhere ha ha good work
Hi mate sorry for the delay in replying, they have Manahay euro edition on the back, made in china and a number of WK-139, they are 15x6.5j and offset of 38
Hope this helps 👍👍
@@mec-tec all good all
Good I forgot I’d asked ha ha but appreciate the reply 🏁
Where did you get the side strips please?
@@smedz85 hi, they are from ebay, all the best Mec 👍
@mec-tec cheers
What alloy and tires are they, size?
Hi mate the tyre size is 195/45/15 and i think from memory the wheels are 6.5j wide, hope this helps 👍👍
@@mec-tec thanks for reply
What a grand job you have done pal! You've transformed a basic little car into a very nice citybug. I was wondering, what is the make and size of the wheels you used?
Thanks mate ! Im not sure on the make but the tyre size is 195/45/15, think the width is 7j from memory 👍👍
Nice!
Thankyou ! 👍👍👍
Next one is sound system
Car looks class
Thanks mate 👍👍
Top banana? Wise up.
what wheels are these please mate?
Hi mate im not sure on the make but they are 195/45/15 tyres and the wheels are 6.5j wide 👍