Wet Sanding An Entire 1984 Porsche 944 And Polishing It To Perfection!
HTML-код
- Опубликовано: 29 сен 2024
- In this video I take on our 1984 Porsche 944 that was painted in a carport with heavy machinery paint. A match made in heaven? I would have to agree. This paint came with some absolutely insane texture so I decided to wet sand it in hopes to level it out a little bit and achieve better clarity. I started with 2000 grit hard block, followed by 3000 grit soft block. The paintwork was then cut and polished, I didn't remove as much texture as I would have liked but with further knowledge of the paint I can now say a bunch of the texture was retained in the base-coat. Over all the car went through a massive transformation and I'm happy with how it looks! Next ill tackle the interior and wheels. I hope you guys enjoy!
All of the products in this video:
Avalon King Sio2 Silica Boost: bit.ly/3hI9DC7
IK Multi 2: amzn.to/3dHujZ3
Optimum No Rinse: amzn.to/2TyscQp
3M 2000 Grit Wet Sanding Paper: amzn.to/3CHAIOl
3M 3000 Grit Trizact Sand Paper: amzn.to/3j22VIn
Rupes LHR15 Mark III: amzn.to/3ssi9rF
Rupes LHR75E: amzn.to/3ttAplI
Rupes iBrid Long Neck Kit: amzn.to/3twofsm
Griots Fast Correcting Cream: amzn.to/3x5V41t
Griots Perfecting Cream: amzn.to/3tsluIz
Rupes Coarse Wool Pad(5 Inch): amzn.to/3meksPv
Rupes Coarse Wool Pad(3 Inch): amzn.to/3CWAgfL
Lake Country Polishing Pad Combo: amzn.to/2W9EL5A
Camera Gear:
Sony A7iii: amzn.to/338m3uW
50MM Emount Lens: amzn.to/336NLbt
Rode VideoMic: amzn.to/3iblEhQ
Tripod: amzn.to/3jSsPvE
For everyone who shops at CARZILLA:
(Use the promo code "CHROMATIC" at checkout to receive 5% off of your order!)
bit.ly/3pXmh2t
Subscribe For More Auto Detailing Content!
www.youtube.co...
Follow us on Instagram: @chromaticgarage
#Porsche944 #WetSanding #PaintCorrection
I still can’t believe professional detailing can restore paint to this condition , unbelievable results Well done 👍🏻 man
I can’t believe you 2 step sanded that whole car with a rid stick. There’s easily 60+ hours in this video. I use them for getting trash, not the whole car 🤯 Awesome work!
He’s got hours or colorgrading and editing too. Nuts.
Robisz robote na profi poziomie.
Twój spokój podczas pracy i zaangażowanie to każdorazowy sukces. Uwielbiam oglądać i czekam na kolejne filmy! Z Fartem!
Thank you Damian! I appreciate the kind words! Much love dude
@@ChromaticGarage Thx!
you must be crazy to sand the whole car with a block smaller than a finger :DDDD
Haha lil crazy. But I had fun I promise!
Absolutely incredible work 😍
Thank you John!!
I did a similar thing to a 928S yesterday.
Wow the finish looks like black glass 👓
Not too bad eh! Thank you Ernie!
Mans listen to Yassin Bey, fiyuuh
Really nice job. Love your technic and video montage. Where do you get your music from?
Thank you bro! Music is all from epidemic sound
Looks like we both use the same aggressive wool pads. Aren’t they absolutely fantastic?? Great work & video, thank you! 👍🏼👍🏼
Yessir! Favourite pads ever! Thanks buddy
Did you remove the foglights in the front bumper?
I think someone stole them prior
@@ChromaticGarage a pair of yellow ones would be Nice
why dont you use rupes x-cut sanding pads with your DA, theyre great minimal scratching and not super aggressive and faster
I don’t like da sanding, I don’t believe the finish is as good
@@ChromaticGarage why wouldnt it be the disks you need to use are Rupes X-cut or Finixia they leave minimal scratching i just done my car the finish is amazing
Dope playlist👌
Thanks Travis!!
wtf you doing this by hand ? It must have been taking you over 10 hours to sand the whole car?
I prefer it! And no😭
How many hours have u spent on this porsche?
20-25 I would assume
Need some fresh badges
Definitely!
You didnt sand it near enough. There are a ton of heavy imperfections in the paint.
👍
Richard! Thank you 🙏
@@ChromaticGarage as alway another masterpiece 😀
“Patience is bitter, but its fruit is sweet.” - Aristotle
Couldn’t agree more Vincent! Hope you have an awesome weekend 🙏
@@ChromaticGaragereally love your vids. The beats are dope too. About how long to complete this process?
I blocked off some time out of my schedule to watch this, your vids are too good to not pay attention to detail. You took your time to make it and in return, my undivided attention was given. Keep them coming brotha.
That is really kind Marco! I appreciate you taking the time to watch it. Thanks bro!
bro.. please teach me your ways on sanding, polishing, and editing 🥲
Haha you keep asking imma have to come down there and get a gym membership!
@@ChromaticGarage yes prepare your money bro !!!!! :-)
There’s no way of upvoting it more. Fantastic work with the car and the edit.
I’m going to write a stern letter to RUclips demanding a multi-mega-upvote is put in place and utilised… immediately.
Hahaha thank you bro!! Way too nice 😭😭😭
A master of framing is only one addition above your detailing skills. Brilliant stuff you’re creating all in all. 🔥
Thank you bro! I really appreciate that!
wow, so mesmerising! watched the entire video.. ...UNDERRATED car btw.
Great video, well edited and good Soundtrack. Any particular reason why you used such a small wet standing block on the whole car instead of a palm sized one on areas like the hood and side panels ?
the satisfaction we get from watching your videos is simply therapeutic!
Love to here it friend! Thank you!🤝🙏
I’m hesitant to use the wool pads cuz I’m not that experienced yet but the results they give is ridiculous man. Well done
They’re my favourite in the DA! Thanks bro!
Can’t even imagine how much time went into this and the video, awesome as always man.
Haha this one was quite tough man! I appreciate you watching!!
Awesome transformation! There's only so much you can do with such a criminal paintjob, but it came out way better. A shame really somebody decided to ruin a 944 like that.
My thoughts exactly haha. Actually really frustrating To see but unfortunately it’s the norm with most of these 80s-90s cars we love now
I completely agree. My 944 is currently being sanded to metal in most places because of a rattle can paint job and some really poor collision repair work. Not saying a rattle can job cant be good, but this one is peeling on the whole entire top layer.
Edit: The paint job was done with most trim and parts removed. So the owner did care greatly to an extent it just wound up in a bad way.
The result is incredible! Fantastic work mate!
Thank you bro!!
What can I say , Chromatic back at it, that Porsche look like it was repainted, and not finished out, but bruh you brought the shine back and made the paint the way it should have been, 2000 and 3000 grit sandpaper, did the trick, yea that paint didn’t lay flat when they painted , but it came out like it was just painted, The music tracks in background on point.
🤜🏽🤛🏽👏🏽👍🏽💯🔥
Question for you after sanding with 2K did you go same direction sanding with 3K ???
Thank you bro! I appreciate you checking out the video! And yes, sanding in the same direction the whole time. Sometimes I went horizontal because I was tired haha
@@ChromaticGarage thanks for tip
The hard work always pays off 💪🏻 well done bud. Have you seen the new Gyeon ceramic coatings? It’s next level stuff 🥶
Thank you dude! Didn’t they just change the multilayer base coats to a single coat for the most part? Haha
Absolutely love wet sanding, gives it that mirror finish
Agreed man! Way easier than just cutting
@@ChromaticGarage and safe
Using the DA for cutting? Most people jump to the rotary. I have a rotary for my first polisher and looooove it.
These DAs cut just as fast as a rotary now a days. Finish out way better too
Ever notice that some of the ceramic coating product names would also be great names for weed!
Hahaha of course. Dispensary companies on one
Prefect as usual for polishing and editing the video. Respect!
Thank you very much!
I do loads of wet sand and polish to this level I need some videoing tips,3m products are my go to brand for polishes too,nice work dude,on fb whats ur page called?
Thanks man! I don't have Facebook
The paintjob to begin with here appears to be very poor, I would assume home made. Certainly not to Porsche standard!
Haha done in someone’s living room while watching corner gas is what I hear
Definitely the most criminally underrated detailing channel on RUclips, it might take a while longer for the word to eventually get around but I have no doubt in my mind that this channel is destined for RUclips greatness with a couple of million loyal subscribers all hanging out to see what you come up with next..
Special mention has to go to the most imaginative and original camera angles on RUclips utterly brilliant work for any content provider but even more so for automotive detailing channel.
The only thing you might consider in future productions is changing up the music styles and tempo especially for the longer videos but it's all personal preference I guess..
The shot of the smartphone Playlist where you scroll and select a track before putting headphones on, I fully expected the music to change at the exact moment your finger tapped the screen 😉👌
I used to do this kind of work
One man in the shop always tell me when he walked by ( Make it shine like a (N) ass in the shower boy) 🤣🤣🤣
Wooow okay let’s never hear that again
Damn! Did they include the roller and the tray at purchase? Holy texture, you must have shaved a few pounds off the curb weight on this, nice work Chromatic!
Hahaha I think this might have been finger paint. Heavy machinery base coat with automotive clear leaves an interesting result but I think it looks better? Haha thanks buddy
La chose la plus intéressante était de voir la retouche peinture,, elle est disparu ? Les produits employés c’est secret d’état ?
Dommage 😢
Jolie travail sinon
Haha it’s literally just the universal touch up pens that every dealership has. The dings were too big to touch up properly
You are godly dude, im a video editor and detailer hobbyist myself and I'm always just blown away by the production quality of your content... always getting new ideas both in video editing and detailing from your channel. You're killing it :)
Oh man no way!! That means the most to me. Thank you so much. Hope you’re having a great weekend!
Absolutely stunning work dude. You are a true master of your craft. Love from a driveway warrior in Ireland.
Thank you George! Much love from Canada!
That car's paint is in horrendous condition. It's as if someone took a gallon of paint and splashed it on the body panels.
Hahaha something like that
Man... Fast correcting cream finish so damn well
FCC and TLC are the goats
Yeah man it’s pretty crazy! Most of the time polishing is obsolete haha
I had to pause the video half way through to clean my phone screen. That paint correction looked so smooth I couldn't see it through my greasy screen 😂🤢
Hahaha greasy screen gang. Thanks bro!
So much defects left, after sanding. You have to sand it much more, allot of orange peel left behind. Good job polishing sanding marks, and doin finishing step. 👍
It is heavy machinery paint base coat with automotive clear. If you looked at the texture after sanding you would acknowledge that the clear was flat. Thanks though
how many hours did you needed for this? regards from Berlin, Germany
That’s a good question! Maybe like 25?
I got back pain just watching the video
I've been looking forward to this all week. 😍
Hope you enjoyed it bro!!
The second time I'm watching this video. Awesome video 🔥🔥🔥
Thank you for the support bro!!🤝🙏🙏
LHR-15 with a wool pad must have taken you so long to get out the 3000 grit hand sand scratches. I have issues of it taking that long with my lhr-21 taking out 5000 grit machine scratches! I don’t like using my rupes for compounding as it’s like watching grass grow.
I like to use it when I’m having access issues, like on the middle of the roof of a car.
I do not personally find it slow. A shame you do though!
Put us on your Spotify playlist . iAmKwanny - “ The Destination Is On Your Right “
Imma check it out now bro!
@@ChromaticGarage 🙏🏽💜
Some of your best word work I heard was done when it was wet......great job on the car, came out fabulous
Thanks Mike! Wait till you see what I can do in the dark and wet haha
Did you coordinate your outfit based on the color wheel? Blue shoes, golden yellow top, green pants...yellow+blue=green. That's fly.
Haha I didn’t man! Clearly you’re way ahead of it than me. Appreciate you!
Amazing work! Where r u located?
Thanks Naji! In Canada!
Awesome video as always brother!!
Thank you Tony!! I hope all is well with you man!
awesome work , but there it looks like there is still plenty of orange peel left
cheers
Thanks! It’s retained in the base coat
I’ve been binge watching this channel this week. Great stuff, so meticulous and relaxing.
I just did the same thing to a black Mercedes wagon. I used a D/A on the larger panels and blocked the other parts.
To do this with a stick is just pure dedication or brilliant billing techniques.
Either way, stellar work as usual.
I do have a question in regards to removing swirls/scratches. The compounding I did on my car was by hand but the polishing and waxing was done via rotary. I got swirls/scratches out but not as much as I wanted. What do you recommend I do next?
Cut with the rotary
Yeah man I would do the compounding but rotary and then waxing by hand! You’ll get much better results
Whoever did that repaint must have been the guy who gets called to do concours paint jobs!
I think the 944 had more orange peel than an orange.
Like pineapple peel. :))))
Haha oh man it was insane but it’s pretty common with this style of paint haha
Smurf here checking in!
Cheeeers Smurf!🙏😎
Excellent vid sir simply the best on the tube 🔥
Thank you Jamie!!🤍🤍🤍
Magnificent work with the incredible result! Thanks for the video! I've got new knowledges
Thank you Aleksandr! I’m glad you enjoyed it 🖤🙏
Impressive as always. What’s your Spotify name? I imagine you’d have a pretty sweet mix happening.
Thanks man! I don’t have a public Spotify playlist unfortunately😔
How do I avoid halo grams ? Maybe slow down I’ve heard going fast is best?
DA polishers pretty much eliminate holograms all together. And an earthy compound like FCC that breaks down very slow
That’s absolut top of all!!! Mate, insane work and the result is stunning!!!!
Thank you Hansjörg!! Hope all is going well with you!
always watching Porsche 944 vids cause it’s my dream car and this popped up in my recommendations. Quality content my friend, made me want this beauty even more!
Holly Molly, You wet sanded the whole car whit these small blocks!! Man~! You have a lot more time on Your hands then i do ! ;-)- lol! Came out Awesome and Great video as always!
Hahaha thanks man!
Black looks great when it is clean, trying to keep it clean is the hard part.
Haha definitely! As with most colours. Best to have one for each day of the week
How much do you charge for something like this ?
I don’t really win a business so I wouldn’t know! Maybe $150 or $175?
Great job!! Great video thanks!!
Griots killed that porche paint!!!! I notice you didn't use the rupes polishes, how does the griots compare to oberk? What are your top 3 compounds? What are your top 3 polishes? Thanks again, awesome work!!!
Great work. May i ask where are those sanding blocks from? I would like too buy some. Thanks
Thanks! They are KXK Dynamics RID Stix!
Just a topper on a 3 step correction??
And no badge removal!?. What kind of Blasphemy is this!
Jk. Great work brother. I plan on doing the same to my car this year. Wish me luck.
Chromatic my boy you gonna make me act up 😏
Haha got you giggling or what 😭
An alternative to wet sanding that is very effective, and much safer for a single stage paint is to use Comet cleaner. Wet the surface, spread the comet liberally and use a terrycloth or sponge. The abrasive action will pull away oxidization and light surface swirling. Then, use maguires #7. Liberally coat the surface and leave overnight and then rub off. Do this a couple of times. Just another approach for folks who don't want to risk wet sanding.
Never heard of this!
What's the risk in Wet Sanding? How's the abrasive paste any safer or different from 2k / 3k wet sanding if both methods achieve the first stage of paint correction?
The correction came out amazing. I was looking forward to see how the touch up on the door and hatch section came out, but you left us in suspense. Did you also apply the Avalon Ceramic coating as well?
Yeah apparently I always be doing that. I’m always so damn tired by the end haha. I did coat it, just the spray coating! Going to be selling it soon. Didn’t wanna to the extra mile
No alcohol prep before SiO2?
Great job and finish, just some real classy filming and soundtracks!!
Thanks buddy! And no sir, not for this
Just did this whole process to a boat. It took forever but worth it. The shops wanted $4500, cost me $500 including Dewalt buffer.
great job! Did you use a paint gauge before starting on this car? Aren't these cars single stage from factory? Would think almost 40 years makes it kind of dangerous to sand like you did
You have a crazy amount of patience to sand this by hand. I just resprayed my E36 and did most of the color sanding with a DA sander. The critical things were done by hand. But I would probably do the same if I had a nice car with original paint. How many hours do you estimate that this took you?
Thanks man! Probably 20-25. It wasn’t too bad
Amazing work as always, keep it up man
Thank you bro!😀😀
came for the detailing..stayed for the cinematography!
Thanks buddy! Appreciate that!
Cuz, why RID sticks for the whole vehicle? You quadrupled your sanding time. Machine 5" & 3", details by hand.
I watched the video very well!! Can you tell me the compound information? Is the type of compound a one-step compound?
How many cameras do you use when you film?
Just the one!
You took the long way home by hand... why not use the machine? I am sure you know they sell the wet sanding discs in 1,000, 1,500 and even 3,000 grit
Love your process. Awesome work !
How do you deal with the lower parts of the car ? because I didn't saw a car lift.
Finally a car guy that loves these truly pieces of art cars. The body lines, the interiors, everything is for the experience of the drive and the driver. Just turned 32 and my craving for an 87 alpine white 944T is at its all time high. The love for this car has outlasted every car I’ve had previously. Camaro,350z, wrx, sti , all were fun but none have me the goosebumps like this car does… gotta bite the bullet
that is really amazing. I love it. Gooood job! I still wonder though why is it always Rupes. Is it really better than other good ones?
No clear coat. Single stage paint. That’s one of the reasons for such a bad texture. So you wouldn’t be able to burn through the clear
Damn, you have a dreamshop now bro. Old viewer here, haven't stopped by in a while plus I changed my account's name to have more privacy, my PFP is still the same though, water beads at or exceeding 120* on my daily's trunk lid :) Edit: Finished the video now, excellent work my friend. I did the same with my 88' rio red Honda CRX Si after having left it abandoned in an abandoned house's garage for like 2 years. That place was full of debris and the ceiling putty and the concrete was falling apart, couldn't clay out all of it, there's one area where there's still a piece of putty bonded to the paint, as it penetrated it very deeply. Needless to say after washing, claying then sanding the whole car down with 3k and then polishing it, it came out absolutely stunning. She still looks amazing to this day and beads water like crazy. I coated her over 2 yrs ago and the beads are still craazy. I could send you pics of the transformation and some bead shots if you like :P
Haha oh man that sounds like a crazy job, I have never dealt with contracting materials like that stuff to paint ever. Can’t imagine. Thanks for watching the video buddy!🙏
@@ChromaticGarage Thanks for givin' us addicts the content ;)
After the polishing step, have you used some kind of eraser before applying the boost spray?
I didn’t in this case! Straight on
Did it really take that orange peel off using 2000 w n dry ? I would of been grabbing the 1500 paper then 2000....haha
Looks very good and a great transformation. If possible I would remove the us/Canada bumpers. Spoil the rear end in particular
Thank you Craig! I’m just selling this cad so no need for much
great work ! just one question, why the small sanding block for the entire car ? that must of taken forever and hurt your fingers.
Thanks! It really didn't take my longer than a longer block. You would hold it at the same angle
Wow ironic when I got my 84 guards red the paint was so badly orange peeled because previous owner got screwed on his paint job I also wet sanded and polished out the entire car. Made a few videos as well and it came out amazing. Awesome video and car
Question 🙋🏻♂️ how many pads did you use for this? 😬
Honestly only like 4, I just kept washing them haha
Ive never touch a paint gun ,but i am sure that i can paint that car better !
Damn boe ,its a very sh**ty prep and paint work. :/