@@marcusdolby1 Thank you. Yes, those are my songs. And I played rhythm guitar as well. Those songs are 32 years old! I am working on new music that will be released soon. I'm just always busy doing sessions with other artists. But now I'm only doing my own music I have written throughout the years. They will be released in the fall.
@@donnysarian Very cool, I was a staff engineer at Reflection Sound Studios here in Charlotte for 12 years. All the way up until the studio closed in 2014. The studio had a great run from 69 until 2014, great room with a Neve V Series. Do you have your own studio?
Hi Marc, I recently bought one of the E-16 with remote, cables and tapes (some of them are probably 20-40 years old new ones :), but I have no idea how to listen to the tapes. (I must admit that I knew nothing about this machine I only thought that it is a player) I started to play one of the tape without attaching any other device and to it and all LEDs seem to work. Difficult to tell as I am not sure if all BARs were used at least once or not. Anyway, any advice how to listen to music using the E16? Could I just use two outs directly attached to an amp? Or any other advice? Any hint would be appreciated. Take care, Lui
The outputs are on the back and yes you can plug them into your line level inputs on your receiver / amplifier, ie CD, Tuner, Tape inputs. Make sure the playback button is on tape, not Input or sync. If you see the VU meter dancing, there is audio on the tape.
@@marcusdolby1Thank you for your answer. I managed to listen to the channels , two at the time. All heads, all spinning parts were dirty but now cleaned. All LEDs are working without a single exception. Fast forward does not work, going to look into it. Have not tried to record anything yet. I have not tried the remote either.
Would like to have one . But do have an 8 track A8 .And it sounds great too . But quarter inch tape . Can only record 4 at a time . How much should one of theses go for ? a
Great machine. I run my in's and out's into a Soundcraft studio 16 channel mixer. Makes a nice affordable analog home recording setup. I use an Alesis Quadreverb GT for effects and monitor on M Audio BX 8's. Need to buy new tape though.....sticky shred syndrome has appeared. I'm in the UK and it appears the best solution is to buy tape without reels from Thomann in Germany. Unless anyone knows a better source in UK? I'm not into baking tapes as there's nothing I need to preserve which is good as I've only recently aquired everything and made test recordings. Great stuff!
I am selling my E-16 Reel to Reel Recorder/Reproducer with 40/50 remote and attached to mobile rack. I have supplied pictures on Marketplace Facebook. If interested please contact. Thanks!
Hi Marcus, I have an E16 I bought from Sky in London late 80’s, fully functional. With Remote. Have a lot of Ampex 456 tapes(used) Where can you get new tapes? Also my old tapes with stuff on them seam to stop rewind/forward and end up with a lot of gunk on the rollers and heads, Is it because the tapes are old or Machine needs to be magnetised? I put a new tape in (Blank) and everything works fine.
The old tapes are shedding, common problem with Ampex 456 and others. I buy my new tape from ATR, you can order from reverb or vintage king. Some people prefer RTM tape.
You can bake the tapes to prevent shedding. 130 degrees in a convection oven for 24 hours. Then let cool in the oven for another 24 hours. This should give you about 5-10 passes to do transfers before the tape starts shedding again. Just keep in mind the more you play them and shed oxide before baking, the more high end you will lose, so don't play them until after you bake them.
surprisingly mine with at least ~1300 hours runtime has perfect LED's too, not sure how, it's also an odd modded 30ips machine, not sure what it's previous use was honestly
@@marcusdolby1 Hifiengine.com has the manual for this and a lot of old equipment. for free. Cool machine you have! (If you push ff and after it starts hold it down it will wind the tape slower, (ff or rewind I think, I know it does on mine but it sucks that it hast to be held, I think?) I just got mine out again and ordered thape from analogtapes.com that's the best place for stuff for it. I'll check out your vids when I get some time. Way Cool...
Would you be willing to take my $ and my ampex tape and dump files down to digital files for me? I did a session on one of these machines a very long time ago and would love to have those tracks👍
Unfortunately I sold this deck last year. All the decks in the videos I post are decks for sale, they usually sell within a week after I post them, so sorry.
Wish we lived in an era where equipment like this was still being made mainstream. Miss the good old days.
Yess 🙌
My dad had this same one back in the early 90s.. This is what I learned on... Wish I had this thing now
For sale on Reverb and eBay.
Beauty! Should i go for a Tascam 38 or a Fostex E16?
@@950kid Fostex, the 38s can be problematic with the audio cards.
I had this deck back in 1992 and sold it 1998. I wish I had never sold it but we were all going digital at that time.
I also have the 2 track version. Recording at 30 ips is just stunning. I always felt these decks were under appreciated.
@@marcusdolby1 I felt so to. My first one was the Model 80 8 Track and that was great! Then I moved up to the E-16.
@@donnysarian Was listening to those tunes you posted, is that you on drums and lead vocals? Sounds great.
@@marcusdolby1 Thank you. Yes, those are my songs. And I played rhythm guitar as well. Those songs are 32 years old! I am working on new music that will be released soon. I'm just always busy doing sessions with other artists. But now I'm only doing my own music I have written throughout the years. They will be released in the fall.
@@donnysarian Very cool, I was a staff engineer at Reflection Sound Studios here in Charlotte for 12 years. All the way up until the studio closed in 2014. The studio had a great run from 69 until 2014, great room with a Neve V Series. Do you have your own studio?
The device has a gorgeous mechanism! Be very careful with the tape! 👍👍👍🔥🔥🔥
it's actually pretty robust, especially half inch
Hello!
What is the tape measurement? Thanks!
I would love to buy that one!
Hi Marc, I recently bought one of the E-16 with remote, cables and tapes (some of them are probably 20-40 years old new ones :), but I have no idea how to listen to the tapes. (I must admit that I knew nothing about this machine I only thought that it is a player) I started to play one of the tape without attaching any other device and to it and all LEDs seem to work. Difficult to tell as I am not sure if all BARs were used at least once or not. Anyway, any advice how to listen to music using the E16? Could I just use two outs directly attached to an amp? Or any other advice? Any hint would be appreciated. Take care, Lui
The outputs are on the back and yes you can plug them into your line level inputs on your receiver / amplifier, ie CD, Tuner, Tape inputs. Make sure the playback button is on tape, not Input or sync. If you see the VU meter dancing, there is audio on the tape.
@@marcusdolby1Thank you for your answer. I managed to listen to the channels , two at the time. All heads, all spinning parts were dirty but now cleaned. All LEDs are working without a single exception. Fast forward does not work, going to look into it. Have not tried to record anything yet. I have not tried the remote either.
wow!! 🤩
Would like to have one . But do have an 8 track A8 .And it sounds great too . But quarter inch tape . Can only record 4 at a time . How much should one of theses go for ?
a
Condition is everything. This one was fully functional and serviced. It sold for $1,800.00
Great machine. I run my in's and out's into a Soundcraft studio 16 channel mixer. Makes a nice affordable analog home recording setup. I use an Alesis Quadreverb GT for effects and monitor on M Audio BX 8's. Need to buy new tape though.....sticky shred syndrome has appeared. I'm in the UK and it appears the best solution is to buy tape without reels from Thomann in Germany. Unless anyone knows a better source in UK? I'm not into baking tapes as there's nothing I need to preserve which is good as I've only recently aquired everything and made test recordings. Great stuff!
I am not sure off the top of my head, but ATR magnetics in the US might be able to help you. they manufacture new tape.
I am selling my E-16 Reel to Reel Recorder/Reproducer with 40/50 remote and attached to mobile rack. I have supplied pictures on Marketplace Facebook. If interested please contact. Thanks!
Hi Marcus, I have an E16 I bought from Sky in London late 80’s, fully functional. With Remote.
Have a lot of Ampex 456 tapes(used)
Where can you get new tapes?
Also my old tapes with stuff on them seam to stop rewind/forward and end up with a lot of gunk on the rollers and heads, Is it because the tapes are old or Machine needs to be magnetised?
I put a new tape in (Blank) and everything works fine.
The old tapes are shedding, common problem with Ampex 456 and others. I buy my new tape from ATR, you can order from reverb or vintage king. Some people prefer RTM tape.
You can bake the tapes to prevent shedding. 130 degrees in a convection oven for 24 hours. Then let cool in the oven for another 24 hours. This should give you about 5-10 passes to do transfers before the tape starts shedding again. Just keep in mind the more you play them and shed oxide before baking, the more high end you will lose, so don't play them until after you bake them.
surprisingly mine with at least ~1300 hours runtime has perfect LED's too, not sure how, it's also an odd modded 30ips machine, not sure what it's previous use was honestly
If you push stop twice you unlock the hubs and can hand locate the tape (song) then push stop again... Mine is a blast to play with
Didn’t know that, thanks Will !!
@@marcusdolby1 Hifiengine.com has the manual for this and a lot of old equipment. for free.
Cool machine you have! (If you push ff and after it starts hold it down it will wind the tape slower, (ff or rewind I think, I know it does on mine but it sucks that it hast to be held, I think?)
I just got mine out again and ordered thape from analogtapes.com that's the best place for stuff for it. I'll check out your vids when I get some time. Way Cool...
@@marcusdolby1 be sure to read through the entire manual, you'll probably learn a bit
I'm jealous of you, man.
Are you looking to sel?
It sold over a year ago.
MARCUSDOLBY1 , I NEED TO BUY ONE AND MADE OLD MIXED, RECORDING IN 1984. HOW MATCH THE PRICE.
It sold years ago
Would you be willing to take my $ and my ampex tape and dump files down to digital files for me? I did a session on one of these machines a very long time ago and would love to have those tracks👍
Unfortunately I sold this deck last year. All the decks in the videos I post are decks for sale, they usually sell within a week after I post them, so sorry.
orr i Quit following you AND Like the videos ..