I like how he's babying that truck in the first bit of the video, and then he realizes he built a petrol pounding, mud mauling masterpiece and starts spitting chunks of mud until that grand finale. Sadly, YouTub only lets you do 1 thumb up, because I've got two thumbs up for this Ford.
Had a 75 highboy built 390, milled n ported heads, bored, cam, balanced with 10 inches of lift on 44 inch hogs. Was wicked! Had a 79 front clip. Sold it years ago to a marina. They took off the lift and still 20 years later using it to pull boats! This video brings back memories!
@@tolmie1141 I'm almost certain they're still using the truck and engine is still rocking. Only issue ever was the infamous valve seals leaking a bit. Smoked a little at startup and that's it
that 514 BBF ain't nothing but the truth 2 thumbs up.... i love them old ford trucks with a solid front axle.....GM junk still use IFS in their 2500 and 3500 4wd trucks....
That motor runs so hard I bet you'd hear those tractor flaps clapping a little bit even when the things not running hours after you shut it down. ✌🤠👍⚠️🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸⚠️
Thats bad ass. I had a brown 78 ford f250 4 speed truck with 38.5 super swampers truck was a beast ended up somewhere downriver from Detroit would like to get me another one.
Man how I wish I grew up around more of that country shit, I race my Beamer and just got a truck really need to learn about swapping engine, rear gears and lifting trucks
Man, I just love that sexy ass truck you got there👍🏾👍🏾...I sure miss my '79 that I had🤦🏿♂️.....I'd dam sure buy that truck from you but I know it's not for sale...Built Ford Tough 👍🏾
Not a '79....thats a hi-boy and those went to '77 1/2. Thats a '79 grill. I wouldn't be surprised if that last hole that stopped him cold didn't break anything. That was a hard hit.
@@Buddy713 Oh yeah I know!!! I'm just impressed because I've broken a couple staring boxes, sector shafts,and other components before......but all I do is rock crawling and some high speed desert running. Great video by the way!!!!!✌😁👍
Drive angles were recently changed still need to rotate pinion back down, but the 1410 u-joint has held up to it all summer. Planning to rotate to the right angle over winter.
@@Buddy713 Did those come in a 79? mine doesn't have a divorced TC, that's why I said it's not a 79, 77 was the last year for that, nice truck, is that motor still going?
@@iddddaduncan its probably not the stock transmissions and tc considering the motor is a 514 big block and these trucks came stock with the biggest motor option being a 460, Im just getting into these trucks so I could be wrong, but from the trucks I've seen, its probably an all aftermarket powertrain
Aaaahhh that ford big block sound.... sweet sweet music
I like how he's babying that truck in the first bit of the video, and then he realizes he built a petrol pounding, mud mauling masterpiece and starts spitting chunks of mud until that grand finale. Sadly, YouTub only lets you do 1 thumb up, because I've got two thumbs up for this Ford.
Now you have 10
👍👍👍👍👍👍👍👍👍👍
Nice to see a Ford powered Ford for once.
I have 79 bronco with a 400 I'm saving to buy a 7.3 crate motor since my 400 spun a bearing
Exactly i wouldnt cheverolet swap a ford if someone paid me and gave me the motor
Yah I know got all these dumbass i see using ford trucks! And put chevy motors stupid... ford truck use ford motor!!!
Its only because Chevy is junk and is a lot cheaper to rebuild/Build etc... My daddy always told me a chevy is a poor mans truck
First of all that's not the only powerful Ford do your research
This is one of my favorite body styles beautiful truck
I could watch this old ford forever
That’s a real TRUCK
Watching this video is like Ford porn. Truck is amazing. Nothing sounds better than a bbf
Had a 75 highboy built 390, milled n ported heads, bored, cam, balanced with 10 inches of lift on 44 inch hogs. Was wicked! Had a 79 front clip. Sold it years ago to a marina. They took off the lift and still 20 years later using it to pull boats! This video brings back memories!
390s are awesome engines.
@@tolmie1141 I'm almost certain they're still using the truck and engine is still rocking. Only issue ever was the infamous valve seals leaking a bit. Smoked a little at startup and that's it
The definition of ford build tough! That truck is nasty! 💪🏽👍🏽👏🏽
That thing sounds SO badass!
Not a huge ford guy but is nice to see a ford big block under the hood instead of a Chevy swap
Absolutely Awesome 😎 Can’t Beat A Ford’s Looks And Kick Azz Power!!! Built Ford Tough Proud 👍👍👍👍👍
That old 460 sounds like a pissed off t rex
Can't beat a Ford. Sounded like a 460. You can't kill those trucks
A 514 is a bored out 460.
Stock bore 514 is stroked
Bore and stroke it
That's how they do it
Awesome truck
Ford tuff 💪
that 514 BBF ain't nothing but the truth 2 thumbs up.... i love them old ford trucks with a solid front axle.....GM junk still use IFS in their 2500 and 3500 4wd trucks....
some killer driving there bud you got a badass truck man.A True Beast love it.
He got stuck at the end it's still the best truck
That motor runs so hard I bet you'd hear those tractor flaps clapping a little bit even when the things not running hours after you shut it down.
✌🤠👍⚠️🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸⚠️
Thats bad ass. I had a brown 78 ford f250 4 speed truck with 38.5 super swampers truck was a beast ended up somewhere downriver from Detroit would like to get me another one.
This truck is just really impressive.... every time
Now thats old school my favorite keep it up boys great job.
True Ford bad ass
Just seen this but this FORD right here is a MOSTER I tell ya!!!
Americas truck at it's best!!!!
Man how I wish I grew up around more of that country shit, I race my Beamer and just got a truck really need to learn about swapping engine, rear gears and lifting trucks
Sounds like a beast!
now thats a badass truck
That's awesome Ford LOVE it heck ya y'all down AND dirty YEEHAW get r done right
Man, I just love that sexy ass truck you got there👍🏾👍🏾...I sure miss my '79 that I had🤦🏿♂️.....I'd dam sure buy that truck from you but I know it's not for sale...Built Ford Tough 👍🏾
This truck needs to be on Instagram
Now that's a bad truck
It looked like fun day Sunday
I can literally see the frame twist every time he flexes the suspension
That a big block Beast
That power is right NOW
That is fucking sweet and what makes it sweeter to big block Ford
2:00 ♡ThatKrackle♡
Looks like Pumpkin Truck planted itself at the end.
That a big block b Beast
Time for some hydro assist to get rid of the wobbles. Badass truck tho. I got a 78 f250 myself.
Front end is scary
Love that truck!!! Guess the front driveshaft couldn't take the last nosedive into the hole?
Never noticed the front stopped spinning after that. Must have broke. Was a fairly hard stop.
@@Buddy713 I pay close attention to all of your videos lol
Broke all 4 spider gears in the run before. The whole last run was 2 wheel drive.
@@jacobhildebrant400 earned a subscriber sir
@@Buddy713 Totally wicked motor! What block is that btw
Beautiful truck. Needs get the steering right tho
Hydro assist would do wonders!
Givin the ol' Hiboy hell thats for sure. Sounds good...for a Ford 😉
If its a 79 its "high boy"
Love the 460!!
4D POWER,ALL DAY EVERY DAY!!!
Not a '79....thats a hi-boy and those went to '77 1/2. Thats a '79 grill. I wouldn't be surprised if that last hole that stopped him cold didn't break anything. That was a hard hit.
Not a high boy it's a 79
That truck needs some bracing. Ford frame aren't very Ridgid and should be beefed up if you run big tires
BigFoot would be proud..............
Got flex!
Anyone know what he is running under the hood?
The steering arm ain't to happy.
How much would it cost to have a truck like that? It’s gorgeous!
60-70 grand to build it right.
I love all trucks. But 8ft bed is the trk for me. Hell frkn...
What t case is he running ?
Even the Chevrolashit boys are staring at this BMF
How he didn't break the steering before the end of that is completely beyond me!!!!!!!
Skeeter McSwagger steering is fine
@@Buddy713 Oh yeah I know!!!
I'm just impressed because I've broken a couple staring boxes, sector shafts,and other components before......but all I do is rock crawling and some high speed desert running.
Great video by the way!!!!!✌😁👍
Not enough send at the end:)
Ford power .........!
DAMB. FORDIFIED 4 LIFE.
Nice what motor and trans?
514 and I’d imagine it’s a c6
514 with a built C-6
@@jacobhildebrant400 what heads and cam are you running?
@@leadslead521 Cam is custom from my engine builder Heads are Trick Flow
@@JeromyBranch Thanks
514
Front drive shaft angle is not right
Drive angles were recently changed still need to rotate pinion back down, but the 1410 u-joint has held up to it all summer. Planning to rotate to the right angle over winter.
Funny the rotating force actually improves the driveline angle under power.. just sayin
All chevy owners
How do i make my truck sound like that?
FORD
WHAT??? CAN'T HEAR YOU
Let’s gooo
Sassey...
Sounds like bigfoot
That's not a 79
?
@@Buddy713 What transfer case is that? why is it so low? nice truck!
@@iddddaduncan looks like a divorced np205
@@Buddy713 Did those come in a 79? mine doesn't have a divorced TC, that's why I said it's not a 79, 77 was the last year for that, nice truck, is that motor still going?
@@iddddaduncan its probably not the stock transmissions and tc considering the motor is a 514 big block and these trucks came stock with the biggest motor option being a 460, Im just getting into these trucks so I could be wrong, but from the trucks I've seen, its probably an all aftermarket powertrain
He cant hardly play he needs deeper mud that's a BadMuthaForda Bwhhahahahaha
it is bad
Sbc=bbf. Nothing special
😂
Thank god a rebel flag i was almost disappointed
Man thats a nice democrat yard destroyer