How to make an obstacle avoiding robot with three ultrasonic sensors | Step by step
HTML-код
- Опубликовано: 21 мар 2022
- In this video, we will learn how to make an obstacle-avoiding robot with three ultrasonic sensors. I think this is a new experience for you. Because we usually make this robot using one ultrasonic sensor. Also, a servo motor is used to turn the ultrasonic sensor left and right. But today we will use three ultrasonic sensors for that process.
OK, enjoy it now.
Short and sweet tutorial.Only from SriTu tech. If you think this video is good, don't forget to like and comment.
How to make an obstacle avoiding robot with three ultrasonic sensors | Step by step
• How to make an obstacl...
***Names of components.
***step by step.
***Make it easy.
Bluetooth control remote -- bit.ly/3GWcmmD
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorial --- www.srituhobby.com
Android app for more tutorial --- bit.ly/3GWcmmD
Our store with the best prices
========================================
srituhobby.com/shop
========================================
( Source code and circuit diagram )
=================================
Website -- bit.ly/36lg23D
Android app -- bit.ly/3GWcmmD
=================================
Components list (Our store -- SriTu Hobby)
=================================
1.Arduino UNO board x 1 -- bit.ly/41RMh1o
2.Ultrasonic sensor x 3 -- bit.ly/3KV8o0l
3.L293D motor driver x 1 -- bit.ly/43Yc5Ld
4.Gear motor x 4 -- bit.ly/40u3TQa
5.Robot wheel x 4 -- bit.ly/3N8OPEm
6.Li-ion battery x 2 --
7.Battery holder x 1 -- bit.ly/3IdStK4
8.Jumper wires -- bit.ly/43V7gSR
9.Foam board / Cardboard / Rigifoam
=================================
Components list (Amazon)
=================================
1.Arduino UNO board x 1 -- amzn.to/3hnMhPj
2.Ultrasonic sensor x 3 -- amzn.to/3gLCkRj
3.L293D motor driver x 1 -- amzn.to/3UcJCes
4.Gear motor x 4 -- amzn.to/2ZrL0AD
5.Robot wheel x 4 -- amzn.to/3bRmZb6
6.Li-ion battery x 2 -- amzn.to/35wst9W
7.Battery holder x 1 -- amzn.to/3kd8O3a
8.Jumper wires -- amzn.to/2RjTt4e
9.Foam board / Cardboard / Rigifoam
=================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.net/sritu_hobby
==========================================
Thanks for watching.
If you learned something in this video,
**Like.
**Share.
**Subscribe.
#SriTu_Hobby_Tech_arduino #robot #arduino_robot - Наука
Very nice
Sir, Your videos are excellent. I managed to make this project amongst others from your videos and website. Instructions are detailed and easy to follow for someone like me who has very basic knowledge of Arduino. I made this project with two motors to make it a little compact. Thank you!
Great 👍
Where is code for it
So nice
Wao very nice 👍
Thank you
Very nice 👍
Thank you
👍🏻👍🏻
Like you used those extra holes given in UNO , do we have to solder or connect those holes to somewhere? Or we can just insert pins and connect to sensors??
I am confused at soldered part
It can be used like maze solver
great project! can I ask what type of wire you used? is it male to female, female to female, or male to male? thank you!
I believe its male to female
Can the L 293d motor driver be used for this?
Hello Master, I want to make a project of a robotic car watering plants in flower pots with a line follower and an ultrasonic sensor. If you like, please share the schematic and arduino code...
is there tutorial for use l298n instead l293n ?
How to change a speed low of motors in program broo pls tell
Will the Robot keep moving if there is no obstacle ? If not, then how to do it?
How you have attached the switch
Sir the best project that I am making please make a plane
Ok
Links descriptions, not founds!
Sir can we able to add Bluetooth module
For voice controll and remote control?
Next week is our competition please reply fast❤️
Please use our SriTu Hobby app on play store
Any benefit of using 3 ultrasonic sensors over a single sensor pivoting on a servo?
Obstacles avoiding reaction reduce
It's really amazing. Sir, Can u pls share the code??
srituhobby.com
my car wheels is slow + its going forward about a 40cm the stops then goes another 40cm and not constantly going forward
is it battery issue? my battery is 3.7v and same as yours
change your power source
project aircond using Nodemcu please ?
Ok sure
@@sritu_hobby as soon as possible okay because i need your References for My inovation Project
Sir I want to make a project on night safety patrolling robot please help me 🙏🙏
Visit our website project
Sir I need code for ultrasonic sensor with Arduino Nano (obstacles avoider ) can u plzz provide me this code because it's very helpful for my group
I'll upload it
Only sensor 2 works. Why do left and right not work? Cable Connection is correct.
Hello, I have a problem when the car moving forward the right side DC motor move slow & sometimes not moving I need to move the tyre using hand then it worked but still slow but when reverse it worked. Can you help me? Thanks
Change your power source
@@sritu_hobby user larger batt volt?
Can I use a 3800 mah battery instead of 4800.
Yes
Hiii
Can you please tell how much cost it take
Description
Hello is there any way for the left and right ultrasonic can detect obstacles?
Yes
Only ny center sensor is functioning, why?
Please check the jumper wires
Can we add Bluetooth controls in it ?
yes of course
@@sritu_hobby can you guide me how .This is my final year project
you can use srituhobby.com
We can voice control+obstacle avoidance together?
Yes of course
Hello, right and left sensors do not work.
If you use 1 ultrasonic sensor, what coding must be changed?
Check our channel
@@sritu_hobby If you use 1 ultrasonic sensor, will it still be the same?
Can you give us code ?
Description
Sir I need Arduino Nano code not uno
Arduino UNO or Nano code are same
@@sritu_hobby but for nano driver is different ryt
can u give the code
srituhobby.com
Where is the code link bro
srituhobby.com
How you learn programming language
I'm software engineer.
it is not working
can you help do it
What is your error?
Yes not working sir😓
Code is having many errors
What's your issue?
code?
Description
Chal hat bekar project not working all components burned by your idea
Ky hua
Can the L 293d motor driver be used for this?
Can the L 293d motor driver be used for this?
Yah