UPDATE MAY 2020: After having failed to work out the mechanism on-camera I thought I'd better put an update out showing how to do it properly - sorry for just not getting it originally! ruclips.net/video/Y2IQ92cqW2I/видео.html
RTFM, holds up to an 11" tablet, no need to be surprised when it can handle an 8" tablet. Oh, btw; You don't need to "do be careful" you just need to not be a dumbass, read the instructions, and realize that when you unlock spring loaded devices they usually snap open, or closed, very quickly. Doesn't take a genius. Just read the instructions next time, and your fingers will be fine... (pro tip; reading the instructions fully, and familiarizing yourself with the device and it's functions, before doing the review, makes for more insightful, and professional quality, content.
@@iansian829 Ghis comment starts of mean, but I REALLY am trying to help, just bare with me. Having a hard time playing Android games, with gamepads? Here ya' go... as you can't even spell "discoNNect" correctly, maybe... just maybe, electronics you need to connect via bluetooth, to Android devices, might just be a little out of your league, but if you insist, Here's help 1) Aps don't "have" games. Some apps ARE games, some apps ARE NOT games. 2) These controllers are for Aps that "support bluetooth gamepads." You need to read the apps description in the app store, and check thev apps "settings" menu, to find out. 3) Once you find an app that is "bluetooth gamepad compatible," you need to "sync" or "synchronize" your gamepad to the device, before launching the app. 4)On your tablet, go into your menu, and select "settings," scroll down, select "bluetooth." Tap "search for devices," then power on your gamepad, do what it's instruction manual says to do, to "synchronize" your device (usually by holding a specific two buttons at the same time, varies by device, your manual will explain). 5) A light on your gamepad will start blinking, when the light turns solid, your tablet will ask you "device found, would you like to pair device," then you tap "yes," or "pair." Now that the controller (gamepad) is "synchronized," exit out of your menu, and launch the app that you are trying to play. 6) Go into the games menu, select "control type" then "gamepad," then exit out of the games menu, to your apps start screen, and tap the A button, or "start" button, on your gamepad. Sometimes tap "start game" on the screen, THEN start using the control, this varies by app/game. The instructions I just gave you will work on 99% of bluetooth gamepads, and 98% of gamepad compatible Android apps... hope that helps...
It's painful to watch how you don't get the logic behind the spring mechanism. Especially, considering this is not the first kind of device that you use.
Omg tell me about it.. I actually can't believe he doesn't get it 🤦♂️🤦♂️ so painful!!!!! I hope the viewers are smart enough to see how obvious the mechanics of the device are and don't decide against this product just because of that misconception..
UPDATE MAY 2020: After having failed to work out the mechanism on-camera I thought I'd better put an update out showing how to do it properly - sorry for just not getting it originally - my bad! ruclips.net/video/Y2IQ92cqW2I/видео.html
Hi , just a tip.....adjust the ipega so hat the tablet just does not !!!!! fit...than use the spring side to open and hold the tablet..saves us all 24 minutes of video
Omg tell me about it.. I actually can't believe he doesn't get it 🤦♂️🤦♂️ so painful!!!!! I hope the viewers are smart enough to see how obvious the mechanics of the device are and don't decide against this product just because of that misconception..
recently got into the idea of mobile gaming. thank you for being so informative. these videos have been great for knowing which product to save my money for
The side you pinched you finger on is the spring that holds the device. The thing you are locking should lock a bit smaller than you device so the spring side holds it in place..... UPDATE: I watched the "Updated Video" and you figured it out. I've liked both videos since you eventually figured it out.
According to the manufacturer: 5.New Function Upgrade, Support Direct-Play Mode on iOS/ Android devices, Compatible with PUBG, Mobile Legends, Rules of Survival and etc. , Easy to operate, NO APP Needed. But it's not obvious whether the 9083 would also work with PUBG etc or not... Also the 9083 supports the Nintendo Switch but 9083s doesn't mention it - I don't have one to try it out with either
I suggest when using controllers you need to turn on the gyroscope to help a little with the aiming. I do that since I don't use controllers and aiming with finger is a bit difficult.
Tip I just use the direct controller mode on the side bottom one, as thats how it came, and it plays fine using the emulators am using. I got it for my tablet , only issue is the thickness gap is too big , no one has a phone or tablet that thick. And am using a 10 inch tablet and i can push it forward and back when its slotted in, which is bit annoying Should be adjustment for that aswell as ur device length.
Hey man, what emulators are you playing? I can't get my 9083s to work on my dolphin and ppsspp emulators, it does not let me remap the buttons. Can you share?
Doesn't the one side lock in the other side have a spring cuz if that's the case you just locked it at the wrong spot and that's why it isn't fitting your tablet
If you are having issues with Shootingprov3 just install older version of app, for example ShootingPlus V3_vv3.0.1.195_apkpure.com.apk works like charm for me,
I need help. Pasa que estoy jugando, y de la nada se desconecta el control de mi celular. Tengo este mismo modelo, y mi celular es un moto g52. Les agradezco por toda la información que me brinden.
6:56 Bruh. The way you put it is wrong. It made the spring not work. You need to set it narrower than the width of the smartphone. So the spring can grip the smartphone.
I bought the same gaming control and I watched your video to see how to connect the both together . it doesn't work on my Android phone . I can pair it up with Bluetooth but it doesn't work. any tips to get this up and running will be much appreciated!
@@nickmarangos2475 at 10:40 do you also have the flashing LED on the gamepad? That's the pairing mode. Make sure the switch is on Android Mode too. Then scan for Bluetooth devices - does it see it listed?
First game I try to map the buttons on, swordigo, and it just doesn't save, so doesn't work. Typical. Does it work for you with this game? The games excellent BTW.
Mate i need help for Ipega PG-9023 i really want to play pubg with it but sadly I can't cause the Shooting Plus V3 you using always detects my Ipega as Device Disconnected even tho i repair it unpair then re pair any other option to assign keys without any payment? I had this on my birthday on 15 and i really want to play it with my pubg Note: I dont have PC or Computer if you suggest something that needs on PC
Do you have a switch on the side of yours like on mine? Maybe try it in one of the other modes and see if the Shotting Plus V3 detects it. Also, sometimes you need to load Shooting Plus V3 first, then go to bluetooth, disconnect and reconnect the controller for V3 to detect it properly
Question to Android Addicts, how did you change the game modes of the controller. Do you have to unpair and re -pair the controller on the bluetooth, I've tested mine, whenever I tried switching modes, I have to unpair the thing from the bluetooth list of my device. Thanks for the reply in advance.
Are you using the Ipega app to map controls? If you're having no luck then try using a different mapping program like Mantis: ruclips.net/video/kGA_3NoFnXQ/видео.html
same, very strange. right thumb is stuck to looking up and it still functions when you tried to look left and right but other than that you will be seeing the sky alot. and my LT is strangely also connected to my select button tried resetting it to no avail
Hello i have s10 plus from samsung. On Bluetooth the this device is connected but in app it shows disconnected. What does that mean ? And how can i connect with the device? Its really frustrating
This happens to me sometimes as well. Here's what I do to fix it: Turn on the controller and make sure the LED stops flashing (confirming it's connected) Load ShootingPlus (it sometimes shows as disconnected) Now pull down the notification panel, press and hold on Bluetooth to go into Bluetooth settings. Press on the PG-9083S to disconnect it Press on the PG-9083S again to connect it Switch back to ShootingPlus and it should be connected
Hey Android addicts, have enough respect for your viewers and atleast edit this video and add a caption saying you used the device incorrectly and the spring mechanism is supposed to be used to keep the device in place not the lock on it's own. 🤦♂️🤦♂️ seriously annoying to watch and painful knowing there are viewers out there looking at your content trusting your opinion and advice. Little bit more respect for those guys mate.
Hi there, I've posted an update to the video which you can watch here: ruclips.net/video/Y2IQ92cqW2I/видео.html It's nothing to do with not having respect for my viewers - it's due to me not getting the mechanism after unboxing the controller - that's all. Hopefully you can dispose of that voodoo doll you made now 👍
2021.10.27 I bought just one of those,This a b x y button is so bads! be slow to react a button mashing! 100% fingertip force power Just push the button = 1 hit. 50-90% fingertip force power push the a b x y button, but it's not responding. My thumb has been hurting for ages.This is a very very Faulty connection. It was very roughfor plays Side-scrolling video game!
It's about 25.5cm (255mm) fully opened up. That's not 100% accurate as I just used a 15cm ruler to measure it but it's certainly can open up at least that much!
i have ipega 9083s. it fits any phone. you dont know how to fit. you should learn from other youtube videos of ipega 9083s to fit the phone or tablet properly
@@AndroidAddicts the controller connects with the Bluetooth too so how would you connect 2 devices at a time eh, this stuff seems pretty useless games without headphone or handsfree useless
I have a google pixel 4 XL and it still does not connect to the Bluetooth. It says that it will automatically connect when you run the app, but it doesn't. I have tried the 4 different settings. The LED lights flash and glow as though they are connected, but there is no response from the phone and I still get the red message that says it's not connected. If you can't help me, I am returning it and giving it a terrible review on EVERY site I can find it on.
I have paired my 9083s to my phone correctly. ShootinPlusV3 recognizes the device. When I open mame4droid and I go to the section to configure the controller, it doesn't recognize it. I tried both Android direct and gamepad mode. Do you have any suggestions?
I've just tried it myself and it's working fine for me. Make sure your iPega is in the Gamepad mode (gamepad icon on the switch. Also make sure you turn the controller off and then back on when you switch modes. LED 3 should be lit). Once connected, go into MAME4droid and click: OPTION -> Settings -> Input -> External controller -> Define keys -> Player 1 Once there, select each direction/button and assign it to your iPega. For me, when I did it each input was recognised and registered successfully (you could tell the default setup of "0: DPAD_UP" etc. went to "1: DPAD_UP" after I re-defined it - so whatever 'controller 0' was, wouldn't have worked by default). Once you've defined your keys it should all start working. Let me know how you get on. PS My "Mode" in the app was set to "Controller Autodetection" ( OPTION -> Settings -> Input -> External controller -> Mode)
@@AndroidAddicts thanks a lot for your answer. Now I cannot try because I am not at home. On Thursday evening I will retry. I think. I did i exactly what you said, but when I tried to redefine the keys it never moved to 1:. I don't remember if I was in gamepad mode though. I will let you know! Anyway thanks for your help!!
@@AndroidAddicts I tried again and now it works. I had to remove the device, delete the data of ShootinPlusV3 (I don't know if it was useful but just to be sure) and pair it again. And be sure to select the GamePad mode. Now it works like a charm!!!
Not too great. It's quite thin so is slightly sharper to use than the Glap controller for example. The dpad on the iPEga 9139 is more comfortable to use: ruclips.net/video/BsYUHtJA48k/видео.html
@@AndroidAddicts Yes, I already installed it and it does not detect any button but it is strange because my galaxy s8 does work very well but my note 10 does not, can it be version 10 of android?
I want to try it but firstly want to make sure that it works without any banned or doesn't cause any bann on my account. please tell us the fact so that we know if it deserves to buy or not
I've not been banned yet but obviously I can't guarantee 100% it won't happen in the future. I believe they're introducing gamepad support natively in the future which will mean anyone can use a gamepad with no issues
yep tested on Pubg and Codm. you just need to have developer options on, usb de bugging on. and for the set up screen of controls of pubg or cod or any games customizable UI., you have turn on the touches. I think it works best for snapdragon devices.
It doesn't work with any of my android devices. Although the device is connected via Bluetooth, the app keeps saying: Device Disconnected I tried and tried but looks like it doesn't work. Is there anything wrong I made? Thank you
Have you got the switch in the right position on the side of the gamepad? If so, it sounds like you might have a faulty one so I would send it back for a replacement.
@@Mat_1000 hi Matt, thank you for your comment. Omg I really don't know. I tried it either with a Samsung galaxy Tablet, and a Galaxy S7. The gamepad was actually connected since I could control icons on desktop but not the games. Moreover the app said "Device Disconnected". I tried and tried again then I gave up and returned it to Amazon.it (I'm from italy). Now I still want to get one similar product but what if then it doesn't work again? 😣🤔
Is it true that somebody uses this gamepad to play on freefire, pubg, fornite or any play Store game multiplayer the device will be banned??? Ive heard bad comments about. Sorry for my bad english I hope you can help me... im thinking to buy the 9083s gamepad, so what is the diference between 9083s and 9083 what's better? Thanks Saludos desde México!
Hello, no one has reported they've been banned in any of my videos (and I haven't been banned) so I think you're pretty safe. The difference with the 9083s is that it also supports iOS devices.
Can you help me that I can't play with tabs2. I can connect and edit that I follow your instructions but playing time no working. Any suggestion thanks.
So far the Octopus app that maps the keys are banned but the shooting plus that ipega uses doesn't. I even use the ipega 9116 to use keyboard and mouse. Still woking until now.
UPDATE MAY 2020: After having failed to work out the mechanism on-camera I thought I'd better put an update out showing how to do it properly - sorry for just not getting it originally! ruclips.net/video/Y2IQ92cqW2I/видео.html
if i open my apps there is no games inside and it shows disconect but its already conected in bluetooth
@@iansian829 are you not able to do mapping
@@666nemeesis yes
RTFM, holds up to an 11" tablet, no need to be surprised when it can handle an 8" tablet. Oh, btw; You don't need to "do be careful" you just need to not be a dumbass, read the instructions, and realize that when you unlock spring loaded devices they usually snap open, or closed, very quickly. Doesn't take a genius. Just read the instructions next time, and your fingers will be fine... (pro tip; reading the instructions fully, and familiarizing yourself with the device and it's functions, before doing the review, makes for more insightful, and professional quality, content.
@@iansian829 Ghis comment starts of mean, but I REALLY am trying to help, just bare with me. Having a hard time playing Android games, with gamepads? Here ya' go... as you can't even spell "discoNNect" correctly, maybe... just maybe, electronics you need to connect via bluetooth, to Android devices, might just be a little out of your league, but if you insist, Here's help 1) Aps don't "have" games. Some apps ARE games, some apps ARE NOT games. 2) These controllers are for Aps that "support bluetooth gamepads." You need to read the apps description in the app store, and check thev apps "settings" menu, to find out. 3) Once you find an app that is "bluetooth gamepad compatible," you need to "sync" or "synchronize" your gamepad to the device, before launching the app. 4)On your tablet, go into your menu, and select "settings," scroll down, select "bluetooth." Tap "search for devices," then power on your gamepad, do what it's instruction manual says to do, to "synchronize" your device (usually by holding a specific two buttons at the same time, varies by device, your manual will explain). 5) A light on your gamepad will start blinking, when the light turns solid, your tablet will ask you "device found, would you like to pair device," then you tap "yes," or "pair." Now that the controller (gamepad) is "synchronized," exit out of your menu, and launch the app that you are trying to play. 6) Go into the games menu, select "control type" then "gamepad," then exit out of the games menu, to your apps start screen, and tap the A button, or "start" button, on your gamepad. Sometimes tap "start game" on the screen, THEN start using the control, this varies by app/game. The instructions I just gave you will work on 99% of bluetooth gamepads, and 98% of gamepad compatible Android apps... hope that helps...
It's painful to watch how you don't get the logic behind the spring mechanism. Especially, considering this is not the first kind of device that you use.
yes i was also.... DOH!
Me too tsk...
Omg tell me about it.. I actually can't believe he doesn't get it 🤦♂️🤦♂️ so painful!!!!! I hope the viewers are smart enough to see how obvious the mechanics of the device are and don't decide against this product just because of that misconception..
May 22, 2020 and i can feel the same exact emotion you guys had. 🤣
UPDATE MAY 2020: After having failed to work out the mechanism on-camera I thought I'd better put an update out showing how to do it properly - sorry for just not getting it originally - my bad! ruclips.net/video/Y2IQ92cqW2I/видео.html
Hi , just a tip.....adjust the ipega so hat the tablet just does not !!!!! fit...than use the spring side to open and hold the tablet..saves us all 24 minutes of video
Haha fantastic summary! 😂
Omg tell me about it.. I actually can't believe he doesn't get it 🤦♂️🤦♂️ so painful!!!!! I hope the viewers are smart enough to see how obvious the mechanics of the device are and don't decide against this product just because of that misconception..
Wow thank you so much for comment, was thinking same thing.
Don't panic, I did end up making a follow-up video showing how the mechanism works properly 😁👍 ruclips.net/video/Y2IQ92cqW2I/видео.html
It is sliding out because you extended it too far. Try adjusting it to a shorter one, and let the retractable side to secure it
Shit man i was thinking tge exact same
recently got into the idea of mobile gaming. thank you for being so informative. these videos have been great for knowing which product to save my money for
Glad to help!
The side you pinched you finger on is the spring that holds the device. The thing you are locking should lock a bit smaller than you device so the spring side holds it in place.....
UPDATE: I watched the "Updated Video" and you figured it out. I've liked both videos since you eventually figured it out.
Haha thanks! Yeah I strive to improve the quality/reduce the idiocy of my videos so I've learnt from my mistake on this one. Thanks for the comment 👍
reduce the right clip part and use the left spring shift and the tab will be steady
24 blood minutes mate!!
Good lord, 2x speed here we go
Good afternoon, excuse me, What are the diferences of ipega 9083 and 9083 s
According to the manufacturer:
5.New Function Upgrade, Support Direct-Play Mode on iOS/ Android devices, Compatible with PUBG, Mobile Legends, Rules of Survival and etc. , Easy to operate, NO APP Needed.
But it's not obvious whether the 9083 would also work with PUBG etc or not... Also the 9083 supports the Nintendo Switch but 9083s doesn't mention it - I don't have one to try it out with either
@@AndroidAddicts Thank you very , I'll see videos from youtubers, talking about ipega 9083 restrictions of PUBG and permissions of ipega 9083 s
@@AndroidAddicts it wouldn't mention switch support because on the 9083 it barely worked
You're killing me...
I suggest when using controllers you need to turn on the gyroscope to help a little with the aiming. I do that since I don't use controllers and aiming with finger is a bit difficult.
Good idea, I'll give that a try sometime 👍
Tip I just use the direct controller mode on the side bottom one, as thats how it came, and it plays fine using the emulators am using. I got it for my tablet , only issue is the thickness gap is too big , no one has a phone or tablet that thick. And am using a 10 inch tablet and i can push it forward and back when its slotted in, which is bit annoying Should be adjustment for that aswell as ur device length.
Thanks for the tip 👍
*T H I C C N E S S T O O B I G*
Perhaps your protective device case was considered during the designing of the controller?
Hey man, what emulators are you playing? I can't get my 9083s to work on my dolphin and ppsspp emulators, it does not let me remap the buttons. Can you share?
It's because you didn't put it on right bro you know the other side stretches out a little bit
dude tension the spring then lock it in place xD
Thank you for this awesome video brother 👍👍👍🙏🙏🙏❤️❤️❤️
Glad you enjoyed it 😊
I bought 9083.. but the shooting vplus is not working... What the hell
MY GALAXY NOTE 10+ WITH ANDROID 10 DOES NOT DETECT MY IPEGA 9083S BUT MY GALAXY S8 YES? WHAT CAN I DO?
Doesn't the one side lock in the other side have a spring cuz if that's the case you just locked it at the wrong spot and that's why it isn't fitting your tablet
If you are having issues with Shootingprov3 just install older version of app, for example ShootingPlus V3_vv3.0.1.195_apkpure.com.apk works like charm for me,
I use my tab s6 lite 10.5 inch work fantastic
Very nice! It's good having a big screen up-close!
the ipega worked for some months
stopped working after android 10 to me
I need help. Pasa que estoy jugando, y de la nada se desconecta el control de mi celular. Tengo este mismo modelo, y mi celular es un moto g52. Les agradezco por toda la información que me brinden.
Call of Duty Mobile and PUBG Mobile games have a different situation with these categories.
6:56 Bruh. The way you put it is wrong. It made the spring not work. You need to set it narrower than the width of the smartphone. So the spring can grip the smartphone.
Bruh...read the pinned comment or video description
I bought the same gaming control and I watched your video to see how to connect the both together . it doesn't work on my Android phone . I can pair it up with Bluetooth but it doesn't work. any tips to get this up and running will be much appreciated!
What phone do you have?
Thanks for getting back to me.i have the hiaomi mi max 3
@@nickmarangos2475 at 10:40 do you also have the flashing LED on the gamepad? That's the pairing mode. Make sure the switch is on Android Mode too. Then scan for Bluetooth devices - does it see it listed?
@@AndroidAddicts thanks buddy sorted ! You da man 👊😎
U are banned?
Did ypu figure out one side is spring leaded to hold the device?
OH MY GOSH 🤯🤯🤯HOW DO YOU DO PAIR !!!!!!!!!!!!
Awesome, so it looks like I could even set this up for brawl stars?
You should be able to set it up for any game 👍
First game I try to map the buttons on, swordigo, and it just doesn't save, so doesn't work. Typical. Does it work for you with this game? The games excellent BTW.
I have this controller and it always disconnects and reconnects when I play (emulator and android games, all the same). What can I do with this?
you have to utilize and balance the left side o the controller to the center, then lock the right side.
GLAK triggers are just spring loaded, not true analog.
That's exactly what analogue is - varying levels of input depending on how hard you press them - the GLAP DOES have analogue triggers
Hi Please does it support iPhone iOS 14.4 for iOS ? PUBG MOBILE
Mate i need help for Ipega PG-9023 i really want to play pubg with it but sadly I can't cause the Shooting Plus V3 you using always detects my Ipega as Device Disconnected even tho i repair it unpair then re pair any other option to assign keys without any payment? I had this on my birthday on 15 and i really want to play it with my pubg
Note: I dont have PC or Computer if you suggest something that needs on PC
Do you have a switch on the side of yours like on mine? Maybe try it in one of the other modes and see if the Shotting Plus V3 detects it. Also, sometimes you need to load Shooting Plus V3 first, then go to bluetooth, disconnect and reconnect the controller for V3 to detect it properly
@@AndroidAddicts what switch tho? And i did do the open Shotting Plus and disconnect and connect but still can't
If you look at my video, I have a little switch on the bottom left grip which let's me choose between Android/iOS etc
Question to Android Addicts, how did you change the game modes of the controller. Do you have to unpair and re -pair the controller on the bluetooth, I've tested mine, whenever I tried switching modes, I have to unpair the thing from the bluetooth list of my device. Thanks for the reply in advance.
I just turn the controller off, change mode and then turn it back on. No need to re-pair, it just gets detected straight away 👌
@@AndroidAddicts what's your os and device. already tried that... but my lenovo p8 doesn't connect automatically.
@@EvoEvolver that's strange.. 🤔 Mine is a Galaxy S10 Plus and seems to work fine
@@AndroidAddicts how do you change the modes? thanks
What works on my S10 is turning the controller off, switching the button and then turning it back on
Bought one, the triggers don't respond the app doesn't work. Any help would be appreciated.
Are you using the Ipega app to map controls? If you're having no luck then try using a different mapping program like Mantis: ruclips.net/video/kGA_3NoFnXQ/видео.html
I bought ipega 9123 and it doesn't work at all... is this model that you demonstrate is still working on pubg?
Anybody with a camera can review these days
What you expect person must have First class degree?
I just got the controller and got it paired up on blu tooth but can't get it to work with retroarch
You have to download a software
What software to download
hello, i have new ipega 9083s, and have one problem. The right thumb drifting, i tryed unpair etc :( any idea?
same, very strange.
right thumb is stuck to looking up and it still functions when you tried to look left and right but other than that you will be seeing the sky alot.
and my LT is strangely also connected to my select button
tried resetting it to no avail
@@garyleonardmamankay hey, i sent back to shop, and i recive 9023s, this stuff works perfectly :)
@@ferencszabo937 shoot i broke my warranty. That was pretty lucky of you.
@@ferencszabo937 Kösz a tippért!
Hello i have s10 plus from samsung. On Bluetooth the this device is connected but in app it shows disconnected. What does that mean ? And how can i connect with the device? Its really frustrating
This happens to me sometimes as well. Here's what I do to fix it:
Turn on the controller and make sure the LED stops flashing (confirming it's connected)
Load ShootingPlus (it sometimes shows as disconnected)
Now pull down the notification panel, press and hold on Bluetooth to go into Bluetooth settings.
Press on the PG-9083S to disconnect it
Press on the PG-9083S again to connect it
Switch back to ShootingPlus and it should be connected
ShootingPlus App doesn't work
can you use that gamepad on emulator dolpin, reicast, ppsspp, epsxe, pcsx2, damonps2 ?
Yeah bro once they have controller support
Hey man, did you manage to use your 9083s on dolphin or ppsspp emulation? I can't get mine to work, It doesn't let me remap it.
If you can share how you manage to get yours working?
Hey Android addicts, have enough respect for your viewers and atleast edit this video and add a caption saying you used the device incorrectly and the spring mechanism is supposed to be used to keep the device in place not the lock on it's own. 🤦♂️🤦♂️ seriously annoying to watch and painful knowing there are viewers out there looking at your content trusting your opinion and advice. Little bit more respect for those guys mate.
Hi there, I've posted an update to the video which you can watch here: ruclips.net/video/Y2IQ92cqW2I/видео.html
It's nothing to do with not having respect for my viewers - it's due to me not getting the mechanism after unboxing the controller - that's all. Hopefully you can dispose of that voodoo doll you made now 👍
@@AndroidAddicts Good on yah mate, haha I think I might put it away for safe keeping..
@@ciwanbagdas6827 Yeah good idea actually 😁😂
Can you please tell what the f program you used to bind the controls?
Yes, it's the rather odly named Shootingplus V3: play.google.com/store/apps/details?id=com.qx.qgbox
Does pubg can detect this and ban you or I can use this ? Any right answers?
Sir.. How can i off the led 1 and 3.. Because it still blink.. I dnt know what shall i do this.. Thank u
It needs to be paired with your device
Does this work for xcloud?
No, sadly not at the moment
Yes, actually it does work seamlessly. There is video about on the Tube.
2021.10.27 I bought just one of those,This a b x y button is so bads! be slow to react a button mashing!
100% fingertip force power Just push the button = 1 hit.
50-90% fingertip force power push the a b x y button, but it's not responding.
My thumb has been hurting for ages.This is a very very Faulty connection.
It was very roughfor plays Side-scrolling video game!
how to change bluetooth gamer controller controls?
I can't get mine to load the Cloud Key Presets. It's just missing entirely.. oh well
How to connect my iphone 7 plus 13.5.1 version to ipega 9083s i hope you cant help me figure out
Make sure it's in the iPhone mode on the switch on the left-hand grip and then, I assume you would install the ShootingPlus V3 app from the App Store
shooterplus v3 is not connecting can u send me the link to download
Hey can i ask when fully opened what is the distance from inside side to side plz, thanks
It's about 25.5cm (255mm) fully opened up. That's not 100% accurate as I just used a 15cm ruler to measure it but it's certainly can open up at least that much!
Someone help is this controller compatible with GeForce now on ipad ?
Shooting app not working on xiaomi redmi note 9s...
i have ipega 9083s. it fits any phone. you dont know how to fit. you should learn from other youtube videos of ipega 9083s to fit the phone or tablet properly
This is not working 4 me...
How do you plug your handsfree lol it seems pretty fit from both sides :')
You can't if it's at the top/bottom of the phone, you'd have to use Bluetooth instead
@@AndroidAddicts the controller connects with the Bluetooth too so how would you connect 2 devices at a time eh, this stuff seems pretty useless games without headphone or handsfree useless
You can have multiple Bluetooth connections nowadays 👌👍
@@itwasntme4605 You don't know tech, do you?!
Don't answer, it was rhetorical.
Lock the controler, then it will give you a secure fit
This is why I stopped playing pubg because of cheaters like you
Est ce que l ont peux connecter ipega 9023 pour le jeux word war heroes.
I have a google pixel 4 XL and it still does not connect to the Bluetooth. It says that it will automatically connect when you run the app, but it doesn't.
I have tried the 4 different settings.
The LED lights flash and glow as though they are connected, but there is no response from the phone and I still get the red message that says it's not connected.
If you can't help me, I am returning it and giving it a terrible review on EVERY site I can find it on.
You need to pair it in your Bluetooth settings, it won't just pair itself by magic. Once paired, then the app will automatically see it.
I have paired my 9083s to my phone correctly. ShootinPlusV3 recognizes the device. When I open mame4droid and I go to the section to configure the controller, it doesn't recognize it. I tried both Android direct and gamepad mode. Do you have any suggestions?
I've just tried it myself and it's working fine for me. Make sure your iPega is in the Gamepad mode (gamepad icon on the switch. Also make sure you turn the controller off and then back on when you switch modes. LED 3 should be lit). Once connected, go into MAME4droid and click:
OPTION -> Settings -> Input -> External controller -> Define keys -> Player 1
Once there, select each direction/button and assign it to your iPega. For me, when I did it each input was recognised and registered successfully (you could tell the default setup of "0: DPAD_UP" etc. went to "1: DPAD_UP" after I re-defined it - so whatever 'controller 0' was, wouldn't have worked by default).
Once you've defined your keys it should all start working. Let me know how you get on.
PS My "Mode" in the app was set to "Controller Autodetection" ( OPTION -> Settings -> Input -> External controller -> Mode)
@@AndroidAddicts thanks a lot for your answer. Now I cannot try because I am not at home. On Thursday evening I will retry. I think. I did i exactly what you said, but when I tried to redefine the keys it never moved to 1:. I don't remember if I was in gamepad mode though. I will let you know! Anyway thanks for your help!!
No problem, hope it works out for you! 👍🏻👌
@@AndroidAddicts I tried again and now it works. I had to remove the device, delete the data of ShootinPlusV3 (I don't know if it was useful but just to be sure) and pair it again. And be sure to select the GamePad mode. Now it works like a charm!!!
@@kukusha1973 great, glad to hear you got it working in the end 👍🏻
How do you play the built in games??
whats the dpad like?? most of these android controllers the dpad doesnt register unless pressed hard
Not too great. It's quite thin so is slightly sharper to use than the Glap controller for example. The dpad on the iPEga 9139 is more comfortable to use: ruclips.net/video/BsYUHtJA48k/видео.html
How do u change the settengs?
Does this work on pubg mobile without getting banned?
Yes it does 👌👍
Just use the integrated app. Don't use other key mapper such as Octopus.
my galaxy note 10+ does not work with the 9083s, it connects to the control but no button responds, what can i do?
Have you installed the Shooting Plus v3 app to see if it shows up in there?
@@AndroidAddicts Yes, I already installed it and it does not detect any button but it is strange because my galaxy s8 does work very well but my note 10 does not, can it be version 10 of android?
Currently the Glap is is $180 and the ipega is $22.
21:12 what game is?
Please help me. My sensitivity is insane with this one. I can barely kill a bot. What am I doing wrong
I guess there's nothing wrong with your skill. It's the terrible dead zones of the sticks that make precise aiming nearly impossible.
can u play COD Mobile with this controller???
Yes you can 👍
My account will be panned if i use this app ???
No it won't 👌
I want to try it but firstly want to make sure that it works without any banned or doesn't cause any bann on my account. please tell us the fact so that we know if it deserves to buy or not
I've not been banned yet but obviously I can't guarantee 100% it won't happen in the future. I believe they're introducing gamepad support natively in the future which will mean anyone can use a gamepad with no issues
Use the direct play method. and don't use v3 or any overlay apps
@@EvoEvolver so that means it works without third party apps, works directly
yep tested on Pubg and Codm. you just need to have developer options on, usb de bugging on. and for the set up screen of controls of pubg or cod or any games customizable UI., you have turn on the touches. I think it works best for snapdragon devices.
@@EvoEvolver ok. Thanks bro.
will this gamepad works on android 5.1.1?
No you need to have Android 6 or higher
@@AndroidAddicts i see... Thanks mate for the info
Hi, does it have vibration mode? Please help me, thanks so much!
No it doesn't
Any help for getting this controller working on steam link? Thank you!
I don't have this anymore to try it sadly. But if it's in x-input mode it should, in theory work OK
It doesn't work with any of my android devices. Although the device is connected via Bluetooth, the app keeps saying: Device Disconnected
I tried and tried but looks like it doesn't work.
Is there anything wrong I made?
Thank you
Have you got the switch in the right position on the side of the gamepad? If so, it sounds like you might have a faulty one so I would send it back for a replacement.
@@AndroidAddicts I have done it. I tried with two Android devices... I guess you are right and I have to send it back.. Thank you :(
@@1947roswell No problem, hope you get it sorted 👍
@@Mat_1000 hi Matt, thank you for your comment. Omg I really don't know. I tried it either with a Samsung galaxy Tablet, and a Galaxy S7. The gamepad was actually connected since I could control icons on desktop but not the games. Moreover the app said "Device Disconnected". I tried and tried again then I gave up and returned it to Amazon.it (I'm from italy). Now I still want to get one similar product but what if then it doesn't work again? 😣🤔
Hi is compatible for redmi note 8 pro?is working?
I'm not sure sorry
Can you pair this remote and also Bluetooth headset at the same time?
Yes you can 👍
@@AndroidAddicts thank you
dont know why this was what i was paying attention to but you have very feminine finger nails
Thanks a lot! 💚
Can the shooting plus support ipega 9123?
ia there any room on the side for the charging and headphones cables?
No, sadly not
@@AndroidAddicts thx for answering.
Hello..
When using the controller, can you plug in the earphone to your phone?
No, there is no room
@@Jacob_Monkey in my opinion have to get wireless ear buds for this case
There is L type jack for audio / charge
Hi, does this have real analog sticks or digital ones? (gamepad tester circle test). The app your using doesnt work on many devices and isnt reliable.
Yes this is proper analogue sticks. Gamepad Tester doesn't work with it for some reason so I has to use the ShootingPlusv3 app to test it
@@AndroidAddicts Thanks!
Is it true that somebody uses this gamepad to play on freefire, pubg, fornite or any play Store game multiplayer the device will be banned??? Ive heard bad comments about.
Sorry for my bad english
I hope you can help me... im thinking to buy the 9083s gamepad, so what is the diference between 9083s and 9083 what's better? Thanks
Saludos desde México!
Hello, no one has reported they've been banned in any of my videos (and I haven't been banned) so I think you're pretty safe. The difference with the 9083s is that it also supports iOS devices.
@@AndroidAddicts thanks for the feedback!! So what Android games do u play with this gamepad??? Ive already ordered it on ali express
It's extensible 🤷🏻♂️😭😭😭 Fix and stretch!!!!
Is this PG-9083 or PG-9083s ??
This is the 's' version. I need to update the title 👍🏻
Whats the difference?
Too small for a galaxy tab s7 plus
How's this guy holding up?
Sadly I sold it a while back
Has anyone tried this with the Nubia Red Magic 5g Smartphone 12GB ram and 256GB internal storage?
Help its drifting what should i do
Send it back under warranty and get a replacement. There should be no drifting with any manufacturer's controller out the box
Does not work with IOS 13.4
โอ้วววซาร่าห์ มันยอดมากกก
Does this work with Android Jellybean?
Can you help me that I can't play with tabs2. I can connect and edit that I follow your instructions but playing time no working. Any suggestion thanks.
What games are you trying? What mode is the controller in? (the switch on the side)
I play WOT world of tank with pg-9083s. Thanks
I have d same issue I can’t ply pubg on d Android device
Can either fit a 10 inch tablet?
It can as long as the total size of the tablet isn't larger than 11"
I don't get what takes so long to open a box
i don’t get why u cant just skip it
Hi.
Its still working with pubg / COD, or already banned this app + joystick too?
There are "controller-like" handles that are "ban-free"
So far the Octopus app that maps the keys are banned but the shooting plus that ipega uses doesn't. I even use the ipega 9116 to use keyboard and mouse. Still woking until now.
Workis as of march 4 2021