Ur a very under rated channel by the way. How you explain things is very clear and straight forward. Much appreciated, alot better than the channels with massive sub counts.
This is actually pretty good info ! Just got a new stereo for my Suzuki Jimny. And ngl has no clue what any of the settings did, so just left it on default.
The mid eq adjusts the frequency higher than bass but lower than treble, the ones in the middle. There’s so much misinformation here, it’s absolutely hilarious. Good video
Thanks very informative. I'm still fine tuning the many settings. I just installed a Kenwood KDC X-302, love it. Wired it up myself, and put in new Cerwin Vega speakers. I'm no expert but there are two power wires, red is switched power, yellow is constant. I'm guessing the yellow is what keeps your clock set. A couple of people asked about the clock not staying set. Please correct me if I'm wrong thanks. I was also able to fix the annoying "protection mode" error code. Great stereo, amazing sound.
Hi. There are a numerous settings covered here that are incorrect. But I will focus on just 2 for the sake of brevity. "Volume Offset" is a feature to normalize your sound between various sources (tuner, aux, cd, mp3, etc.). It allows you to jump sources without having to worry about marked volume increases or decreases. It lets you customize and adjust the "level" of your various sources across the board in terms of volume/sound. Secondly, "Loudness" does not simply make your stereo louder especially at high volume. Instead, loudness on any audio (home or car) is intended to boost low and high frequencies when listening at low levels. The human ear is not able to perceive certain frequencies at low levels. Without getting into the mechanics of it here, the ear will flatten sound to the brain. As a result, bass and treble will lack or not be heard at low levels. Loudness amplifies these signals and allows the human ear to hear these frequencies. Particularly bass. Imagine playing soft jazz at volume 2. Loudness will enable you to hear some of the bass. Without it, your ear will not pick it up. Loudness should not be used at high volume, although most radios will clip that off automatically these days to prevent damage. Otherwise, great video! And thanks for putting it out there to help others!
@reinassance man I have a KDC-252U and my radio just started going to protect mode. I’ve did the factory reset and it worked for maybe 10 minutes before going right back into protect mode. Do you know why it’s doing this and how to fix it? I need my music. TIA
the video is very useful but I would like to ask for information. when I adjust the balance for the left and right audio output, nothing is heard from the right speaker when I connect the phone with the aux cable and therefore I'm in tuner. on the other hand, when I adjust the balance to the mode for listening to the radio transmitted by a radio station, the right speaker works. so since it's not a speaker problem, is there some setting or step that I don't know? could you help me? A thousand thanks
Hi there, love the video, you explain so well and so clearly. Thank you! I have some issues with my kenwood kmm bt306, the sound doesn’t not work on one side of the car (the right side) , very strange!! I wondered if you had any advice for this! Thank you and keep up the great work!!
Just my opinion, but no matter how you change eq settings on Kenwood, the units always lower the volume to compensate. Mp3 files sound the lowest from flash drive.
Ha.. I just got a 98 TJ and I'm installing a Kenwood head unit into it before I decide if having a good stereo is worth it or not (at which point I might chop up the dash and put a double DIN unit in there.) I noticed you're in a TJ too, so that's funny. I paid more for the kenwood to get HD radio and all those filter options for each speaker so hopefully I can end up with something that sounds better than the Chrysler stereo, which leaves a lot to be desired.
I have gone through every posting under excelon single head units & have read the entire manual for my Kenwood KMM-X704 and can't find any info on how to set the presets for the radio station above the 6 labeled on the headset. The manual states that you can set a total of 18 HD stations but how do you tag and recall the stations above the 6 listed on the display?
Sometimes one button has two presets so you have to press it twice to get to the other presets. But honestly I’ve never taken the time to set my presets
@@seancanoy thats not really true cause i bought RCA to Aux and i disconnected the Headunit and play music with my phone connected to my 4 channel amplifier and the engine noise wasnt there. But the moment i connect my headunit back then noise is back. Unless if you going to say the problem is RCA's which most of us replaced them but the noise continued.
You can try to use the fader setting and move the sound to favor the front or rear. Then you can go into your bass settings and adjust those. There is no way to move only the bass. Hope that helps!
I'm a little confused about the Sub w level and the Bass boost option. Are you saying the sub w level affects only the sub but Bass Boost increases bass in the door speakers only?
Hello, I want to ask you. Please reply. I have 6 Kenwood 320 speakers. I can turn on the treble +8 and the mids +2 in order to make people hear me from afar. For the long distance, I mean, knowing that I am from Amblefire. I also opened the maximum treble. I want to do this if I put the treble on. On +8 and Mid +2. Will Twitter burn inside the speaker? I want a long-term guarantee. Thank you❤️
I own a Kenwood KDC-BT838U recorder. The maximum volume I open is 33 or 32 some of the time 29. I know that I turn off the bass on the speaker from the amplifire and the recorder. I don’t know. I want your advice on treble +8 and mids +2. Do you have a better caliber for the long range? I have 6. Kenwood 320 speakers and 2 Ahuja 12 inches. Thank you, brother❤️🤝
Stereo is in my boat, it comes on plays through the 4 speakers in the cabin. It does have an amp and is still getting power. We were listening on the lake, turned the boat off along with stereo and anchored up when we re started plays through cabin only no upper speakers or subs will make sound. Is there possibly an a and b speaker option that I can’t find?
My unit resets all my settings every time I shut my car off and on? Any reason why it would do this. Is there a button I need to press to save my settings as I’m changing them?
It’s a wiring issue but I’m not 100% sure how to fix it. Basically instead of just turning off, your head unit is shutting down completely and factory resetting every time you turn it back on. Kind of like when you disconnect your car battery and then reconnect.
please explainmore about subwoofer level. i have a active subwoofer and a kenwood HU. which level should i select for SW level? shold i set it at top and then set SW gain?
If it were me I would keep the SW level at 1 or whatever it was at and then set your gain properly. You’re supposed to set your gain to where the bass stays clear at high volume. If it gets distorted at high volume then it’s set too high
Help I just got my car worked on and now my radio doesn’t work I have a similar kenwood and my Bluetooth connects fine but I can’t hear anything come out, no sound and I’m not sure how to put it on Bluetooth setting
Go ahead and set your tweeters to play 150 hertz they'll blow up. Hpf on the headunit is for the mid range speakers. Tweeters hpf should be more like 2k hertz at the lowest.
I'm really struggling trying to make real tight bass. I have two 8 morel primos, and un amped Panasonic splits. Trying to get psytrance sounding sharp. Any advice for head unit settings?
sharp crisp audio comes from medium set mids and high treble. Your hz frequency changes what audio the subs will pick up. Lower frequency basically removes any treble lowest removes any treble and mids. The higher the slope the less frequencies will get past your set frequency. So if your slope is at -6db/oct and a 80hz the hz higher than 80 can still “sneak” through. Your sub can handle more frequencies setting should normally be no lower than 100. But between 120 and 180 will sound best. Adding tweeters and better component speakers with their own dedicated amp makes a MASSIVE difference. Your head units amp is small, amping your component (door) speakers will vastly improve sound quality, and loudness. Power bass 3XXXL’s are hands down my favorite component speakers, however i’ve been out of the car audio game for a good few years so there may be better out by now. But Bose infinities are always a fanfuckingtastic pick as well. Also your sub box has a lot to do with sound as well if it’s a cheap shitty box, get one made or make one yourself (it’s not hard.) And a better head unit than this will help a lot more as well. Find the newest version of the Kenwood Excelon KDC-X996 it has an absurd amount of settings like the abilitie to make your speakers sound like they’re 20 feet away from you. Or the audio height. I have the X996 so the newest one would be even better id imagine. But honestly if you can find one. The X996 is amazing. Plus it has a 13 band EQ so you’ll be able to do exactly what you’re trying to do MUCH easier than only really having 3 ex options that can’t fine tune any audio.
The sub setting only works if you have a subwoofer hooked up to your head unit. Then it lets you adjust the subwoofer tuning. But if you do have a subwoofer then it should be in with the equalizer settings most likely
@@seancanoy I have updated door speakers pioneers not top of the line but pretty expensive. Blew one. Now looking into mid 6 by 5. But I thought bass boost was for the sub not the door speakers lol
yeah but how do i change the Month or get out of the Month reading it blocks the current play station and its frustrating by the way ur a genius Harvard or Stanford bound?
@@seancanoy FYI state schools suck why not cross the Mississippi and head to Utah lil town called Provo tier one school and tuition is a gift 1500 a semester
don't sell yourself short on where u go to school plenty of money around for white guys especially at schools like Stanford and BYU Google has a treasure trove of scholarship funds so I just hit the button and then hit the up arrow and the month is now off the display ugh thanks again u seem way to bright to bother with a state school and if ur not a guy that is banging every chick or drinking smoking drugs BYU might be a nice change I knew a guy tight end at Notre Dame in IN and he left ND to goto BYU he said he was tired of the party atmosphere and just wanted to focus on football and classes so how about that and u wouldn't need a scholarship at BYU its almost free to begin with at 1500 a semester for tuition add it up it 3K for tuition and i dunno 100 a month for rent and if u really want inexpensive tuition BYU Hawaii campus which is across the street from the Pacific ocean now come on two years there then transfer to Provo im telling u its magic
oh and here is a typical day at BYU monday's the most classes and never a test paper due or quiz is given on a Monday due to Sunday being the Sabbath they don't want students doing homework they want them reading and do church stuff on Tuesday at 10am is Devotional NO CLASSES are scheduled don't miss one tho teaches will quiz on the devotional Wednesday's its a heavy day of class work Thursday a light day and FRiday is light as many kids take off for Las Vegas or the slopes or go to Moab for white watering always plenty to do
i installed this radio with a mês sound system with speakers, amp and sub, but the radio keeps shutting down after a couple minutes playing, anyone else experiecing this?
@@seancanoy I just bought these speakers I doubt it. I’m thinking it’s because I have them ran to my radio without an amp so the speakers dont have enough power, causing distortion. I’m really not sure tho
@@seancanoy the in dash radio, it used to go up to past atleast 40 which was the highest i put it but now it only goes up to 35 and I’m assuming it’s because it’s getting low on battery. But that was when it was parked so I don’t know if when the truck is driving the volume goes higher
Your head unit never needs to be charged. It should be wired to a constant power source when the car is on. It could possibly be a setting that was changed that won’t let it go higher
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Ur a very under rated channel by the way. How you explain things is very clear and straight forward. Much appreciated, alot better than the channels with massive sub counts.
I appreciate that!
This is actually pretty good info ! Just got a new stereo for my Suzuki Jimny. And ngl has no clue what any of the settings did, so just left it on default.
Glad it could help! Some of them are hard to explain but I did the best I could!!
😵😵😵My head is spinning from all this info...Thanks for sharing
Most of it doesn’t really matter lol! Thanks for watching🙌
Actually explained really well.
Thank you.
Thanks. Clear and useful.
The mid eq adjusts the frequency higher than bass but lower than treble, the ones in the middle.
There’s so much misinformation here, it’s absolutely hilarious. Good video
Thanks 😊
Very helpful thanks. I went with a JVC saved opponents as Kenwood with a lower price
Good explanation on the lows, mids, etc. Good job.
Thank you!
Well done, very informative. I just happened to have the exact same unit so it was especially useful. Thank you SEAN !!👍
Thank you for watching 😁
Blue looks good on you!
Thanks Kim 😁
Great explanation
Thanks
Thanks you just help boost sound in my old Chevy work truck.
Well done. Thanks for this. Helped me understand it. It's not as complex as I thought it was.
Thank you! I’m glad it helped
Great vid. I needed this for my 704
Glad it helped!
Thx very helpful. I always confuse about mid, treble and crossover🤣 now my crossover is set at Through.
Thanks for watching! Glad it helped 🤙
Thanks very informative. I'm still fine tuning the many settings. I just installed a Kenwood KDC X-302, love it. Wired it up myself, and put in new Cerwin Vega speakers. I'm no expert but there are two power wires, red is switched power, yellow is constant. I'm guessing the yellow is what keeps your clock set. A couple of people asked about the clock not staying set. Please correct me if I'm wrong thanks. I was also able to fix the annoying "protection mode" error code. Great stereo, amazing sound.
Sounds like a good setup, thanks for watching!
Hi. There are a numerous settings covered here that are incorrect. But I will focus on just 2 for the sake of brevity. "Volume Offset" is a feature to normalize your sound between various sources (tuner, aux, cd, mp3, etc.). It allows you to jump sources without having to worry about marked volume increases or decreases. It lets you customize and adjust the "level" of your various sources across the board in terms of volume/sound. Secondly, "Loudness" does not simply make your stereo louder especially at high volume. Instead, loudness on any audio (home or car) is intended to boost low and high frequencies when listening at low levels. The human ear is not able to perceive certain frequencies at low levels. Without getting into the mechanics of it here, the ear will flatten sound to the brain. As a result, bass and treble will lack or not be heard at low levels. Loudness amplifies these signals and allows the human ear to hear these frequencies. Particularly bass. Imagine playing soft jazz at volume 2. Loudness will enable you to hear some of the bass. Without it, your ear will not pick it up. Loudness should not be used at high volume, although most radios will clip that off automatically these days to prevent damage. Otherwise, great video! And thanks for putting it out there to help others!
Thank you for the advice!
@reinassance man I have a KDC-252U and my radio just started going to protect mode. I’ve did the factory reset and it worked for maybe 10 minutes before going right back into protect mode. Do you know why it’s doing this and how to fix it? I need my music. TIA
Very helpful! Thank you!
I tried to read the model. Like the looks of this unit. Got a link to buy one?
I’m having trouble finding a wed site to buy it on, but it is a Kenwood eXcelon KDC x597
The number could be x697 or x796 they look the same
Ah fuck finally my audio actually sounds pleasing and doesn't destroy my ear drums
Im still using kenwood kdc x991👍
the video is very useful but I would like to ask for information. when I adjust the balance for the left and right audio output, nothing is heard from the right speaker when I connect the phone with the aux cable and therefore I'm in tuner. on the other hand, when I adjust the balance to the mode for listening to the radio transmitted by a radio station, the right speaker works. so since it's not a speaker problem, is there some setting or step that I don't know? could you help me? A thousand thanks
Sorry for the late response, I think that might be a wiring problem. It’s hard to tell. Let me know if you get it figured out.
I have now a Good 950 kdc kenwood so much Settings on 1 DIN
Hi there, love the video, you explain so well and so clearly. Thank you! I have some issues with my kenwood kmm bt306, the sound doesn’t not work on one side of the car (the right side) , very strange!! I wondered if you had any advice for this! Thank you and keep up the great work!!
Great video. Any idea why in BT mode my amp doesn't work?
Have you checked your remote wire?
I have dp502bt, I wanna know how to tune that to best settings for bass and treble
A lot of that is personal preference my guy!
Just my opinion, but no matter how you change eq settings on Kenwood, the units always lower the volume to compensate. Mp3 files sound the lowest from flash drive.
Good. You can't blow ur speakers. It's called lowering the pre amp to match the highest boosted frequency
How do I get it off protected? It's not letting me switch it off and back to tuner or anything any bands etc please help me
Thank you
Do you know why I can’t go pass vol. 27? As soon as I do it goes down to 15?? Also I do have subs, I’m not sure if that makes a difference
Yo my sounds goes bacc down. To 15 once it hits 28 any suggestions
This happens when you change volume on your phone
Same
Ha.. I just got a 98 TJ and I'm installing a Kenwood head unit into it before I decide if having a good stereo is worth it or not (at which point I might chop up the dash and put a double DIN unit in there.) I noticed you're in a TJ too, so that's funny. I paid more for the kenwood to get HD radio and all those filter options for each speaker so hopefully I can end up with something that sounds better than the Chrysler stereo, which leaves a lot to be desired.
Yes a speaker upgrade is a good one for the TJ!
Whi kenwood JVC-x704 don’t come with cable dimmer ? It’s to bright in the night please I need help
this is for adjusting if the speakers are hooked directly to the head unit? or if they are connected to an amplifier? or both?
Mine go from the head unit to an amp to the speakers but they adjust the same as if it was just from head unit to speakers
Well thank you
Anytime
I have gone through every posting under excelon single head units & have read the entire manual for my Kenwood KMM-X704 and can't find any info on how to set the presets for the radio station above the 6 labeled on the headset. The manual states that you can set a total of 18 HD stations but how do you tag and recall the stations above the 6 listed on the display?
Sometimes one button has two presets so you have to press it twice to get to the other presets. But honestly I’ve never taken the time to set my presets
Bro,does kenwood headunits develop engine/alternator whine like JVC and Pioneer headunits?
The head unit has nothing to do with the engine or alternator making noise
@@seancanoy thats not really true cause i bought RCA to Aux and i disconnected the Headunit and play music with my phone connected to my 4 channel amplifier and the engine noise wasnt there. But the moment i connect my headunit back then noise is back. Unless if you going to say the problem is RCA's which most of us replaced them but the noise continued.
Hi told you about my problem, please reply me shifting the bass in rear speaker.
You can try to use the fader setting and move the sound to favor the front or rear. Then you can go into your bass settings and adjust those. There is no way to move only the bass. Hope that helps!
Ma man💯
How do you turn off demo mode on the kenwood kdc-x395
ruclips.net/user/shortslBmKdHyxmzw?feature=share
Hope this helps
I'm a little confused about the Sub w level and the Bass boost option. Are you saying the sub w level affects only the sub but Bass Boost increases bass in the door speakers only?
Bass boost increases the bass in all the speakers including the sub
Hello, I want to ask you. Please reply. I have 6 Kenwood 320 speakers. I can turn on the treble +8 and the mids +2 in order to make people hear me from afar. For the long distance, I mean, knowing that I am from Amblefire. I also opened the maximum treble. I want to do this if I put the treble on. On +8 and Mid +2. Will Twitter burn inside the speaker? I want a long-term guarantee. Thank you❤️
I don’t think you should have a problem as long as you don’t run the speakers on full volume all the time
I own a Kenwood KDC-BT838U recorder. The maximum volume I open is 33 or 32 some of the time 29. I know that I turn off the bass on the speaker from the amplifire and the recorder. I don’t know. I want your advice on treble +8 and mids +2. Do you have a better caliber for the long range? I have 6. Kenwood 320 speakers and 2 Ahuja 12 inches. Thank you, brother❤️🤝
Stereo is in my boat, it comes on plays through the 4 speakers in the cabin. It does have an amp and is still getting power. We were listening on the lake, turned the boat off along with stereo and anchored up when we re started plays through cabin only no upper speakers or subs will make sound. Is there possibly an a and b speaker option that I can’t find?
Is it only when using Bluetooth?
@@seancanoy no it’s all the time
No it’s all the time.@@seancanoy
I have one in a 97 gti and it flips sideways to put a disk In but if I turn it upside down, it’s just a flat side with not buttons… what’s that
I got a kenwood kdc bt35ou and i cant find the sub woofer setting
My unit resets all my settings every time I shut my car off and on? Any reason why it would do this. Is there a button I need to press to save my settings as I’m changing them?
It’s a wiring issue but I’m not 100% sure how to fix it. Basically instead of just turning off, your head unit is shutting down completely and factory resetting every time you turn it back on. Kind of like when you disconnect your car battery and then reconnect.
please explainmore about subwoofer level. i have a active subwoofer and a kenwood HU. which level should i select for SW level? shold i set it at top and then set SW gain?
If it were me I would keep the SW level at 1 or whatever it was at and then set your gain properly. You’re supposed to set your gain to where the bass stays clear at high volume. If it gets distorted at high volume then it’s set too high
I keep my sub level at 0, loud off, bass boost off
Thank u
Thank you for watching!
Help I just got my car worked on and now my radio doesn’t work I have a similar kenwood and my Bluetooth connects fine but I can’t hear anything come out, no sound and I’m not sure how to put it on Bluetooth setting
Go back to who worked on your car.
Source button toggles between Bluetooth and other modes.
Or you can hit play twice and you’ll hear it
Is there any way I can get the bass out of my door speakers and only play bass with my subwoofer through this head unit?
You can turn your bass level down but I would recommend having at least a small amount of bass so that your sound is more balanced
To do that you need to turn on the HPF (high pass filter) and to around 160. That should take most bass out of the speakers in the doors.
Nice try. Thank you
Gadi engine off fm work but engine on fm silent mode which setting pls tell me
try applying as a salesman for kenwood!
Working at Sunglass Hut taught me I’m not a huge sales guy 😆
Kmm x704... "hd error please update"... no updates are listed... no fm radio sound at present.. won't let me change stations with scan buttons...
i have to set my audio settings every time i turn my car on how do i get my kenwood to remember my settings? is under the "user" setting?
If your stereo does this it’s most likely a wiring problem. Your head unit should save the settings automatically
Why is the clock not staying set? It seems like everytime I start the car the clock keeps changing to a different time? I have a KDC bt365u
It might be something with the power where it resets every time you turn the car off
Check your power wires, I believe the yellow (constant power) keeps your clock set.
can you show us your music setup
Maybe I'll make a video on it!
I'm having trouble with music playing through my USB. I've tried resetting, format file type, etc.
My chime volume on my 2005 chevy silverado LT is loud asf. My dad messed with the stereo settings and now it’s rlly loud lol. Where can I lower this?
There’s probably a chime volume setting if your dad changed it
Heyyy. Can you confirm what model this kenwood dab radio is
I believe it’s KDC-696
Please how to play Bluetooth music in the radio
I have the same system but it doesn’t let me pass volume 27
Rip.. lol sometimes there is a volume offset button or a loudness setting that makes the speakers louder even if it is not turned up all the way
So I changed out my speakers - How do i connect my stereo to the speakers i installed?
If you just replaced your speakers then they should work if you hooked them up to the same wires
Go ahead and set your tweeters to play 150 hertz they'll blow up. Hpf on the headunit is for the mid range speakers. Tweeters hpf should be more like 2k hertz at the lowest.
With radio I can hear stereo sounds, but while using bluetooth, i only hear mono, can someone help me?
I have the same radio.
My screen.went dark but it's working. Makes no sense. How do I fix?
I'm really struggling trying to make real tight bass. I have two 8 morel primos, and un amped Panasonic splits. Trying to get psytrance sounding sharp. Any advice for head unit settings?
sharp crisp audio comes from medium set mids and high treble. Your hz frequency changes what audio the subs will pick up. Lower frequency basically removes any treble lowest removes any treble and mids. The higher the slope the less frequencies will get past your set frequency. So if your slope is at -6db/oct and a 80hz the hz higher than 80 can still “sneak” through. Your sub can handle more frequencies setting should normally be no lower than 100. But between 120 and 180 will sound best. Adding tweeters and better component speakers with their own dedicated amp makes a MASSIVE difference. Your head units amp is small, amping your component (door) speakers will vastly improve sound quality, and loudness. Power bass 3XXXL’s are hands down my favorite component speakers, however i’ve been out of the car audio game for a good few years so there may be better out by now. But Bose infinities are always a fanfuckingtastic pick as well.
Also your sub box has a lot to do with sound as well if it’s a cheap shitty box, get one made or make one yourself
(it’s not hard.) And a better head unit than this will help a lot more as well. Find the newest version of the Kenwood Excelon KDC-X996 it has an absurd amount of settings like the abilitie to make your speakers sound like they’re 20 feet away from you. Or the audio height. I have the X996 so the newest one would be even better id imagine. But honestly if you can find one. The X996 is amazing. Plus it has a 13 band EQ so you’ll be able to do exactly what you’re trying to do MUCH easier than only really having 3 ex options that can’t fine tune any audio.
@@LikelyLagging thanks heaps brother!
How do u find sub settings on headunit? This could be my problem with tuning
The sub setting only works if you have a subwoofer hooked up to your head unit. Then it lets you adjust the subwoofer tuning. But if you do have a subwoofer then it should be in with the equalizer settings most likely
U need an amplifier or direct conection for the subwofer?
You need an amplifier which is connected to the battery and the head unit, then the sub is connected to the amplifier
Mine is stuck in demo mode can you help
Can someone explain "sound recenter"?
kmm-bt328u radio says disconnected I click to switch it to pandora, Bluetooth, Alexa, Radio and it doesn’t even do anything. Please help
Have you connected to the Bluetooth before?
How do I reset from protecting mode?
I’m not sure what protecting mode is
Is their anyway to make the volume go past 35
No 35 is probably the highest
I can’t even find treble on mine I’ve went through every setting
Can you find bass and mid?
They’re under different name
How i can turn off the beeping sound ??
Why does base boost work on both the sub and the door speakers? Major flaw in my opinion.
I suppose if you have upgraded door speakers that can handle the extra bass 🤷🏼♂️
@@seancanoy I have updated door speakers pioneers not top of the line but pretty expensive. Blew one. Now looking into mid 6 by 5. But I thought bass boost was for the sub not the door speakers lol
Yeah me too it’s pretty unusable
Hello I have Kenwood and always when start the car I must turn off the demo mode how I make Permant offt
There is a demo mode setting that you can turn to “off” and that should fix the problem
@@seancanoy finally i find it i change the cable red and yellow i put red with yellow and yellow with red and finish
How high is the volume??? Setting
What do you mean?
How do i get to TWEETER setting
It depends how it’s wired and your specific head unit
yeah but how do i change the Month or get out of the Month reading it blocks the current play station and its frustrating by the way ur a genius Harvard or Stanford bound?
Haha just a Missouri state school! When it comes to setting the month it’s probably in with where you adjust time settings.
@@seancanoy FYI state schools suck why not cross the Mississippi and head to Utah lil town called Provo tier one school and tuition is a gift 1500 a semester
don't sell yourself short on where u go to school plenty of money around for white guys especially at schools like Stanford and BYU Google has a treasure trove of scholarship funds so I just hit the button and then hit the up arrow and the month is now off the display ugh thanks again u seem way to bright to bother with a state school and if ur not a guy that is banging every chick or drinking smoking drugs BYU might be a nice change I knew a guy tight end at Notre Dame in IN and he left ND to goto BYU he said he was tired of the party atmosphere and just wanted to focus on football and classes so how about that and u wouldn't need a scholarship at BYU its almost free to begin with at 1500 a semester for tuition add it up it 3K for tuition and i dunno 100 a month for rent and if u really want inexpensive tuition BYU Hawaii campus which is across the street from the Pacific ocean now come on two years there then transfer to Provo im telling u its magic
oh and here is a typical day at BYU monday's the most classes and never a test paper due or quiz is given on a Monday due to Sunday being the Sabbath they don't want students doing homework they want them reading and do church stuff on Tuesday at 10am is Devotional NO CLASSES are scheduled don't miss one tho teaches will quiz on the devotional Wednesday's its a heavy day of class work Thursday a light day and FRiday is light as many kids take off for Las Vegas or the slopes or go to Moab for white watering always plenty to do
Mine keep switching from Bluetooth to traffic info how do I get it to stop
It might be something wrong with the buttons I’m not sure
I just want to know which button ends the phone call when connected for calls. Anyone know??
I think the best way would be to hang up from your phone
My radio 8s old. Dpx500bt
What’s the lowest hz on the lpf?
It depends on your head unit but probably around 30hz maybe even lower like 10hz?
I meant on your unit
I cannot figure out how to get back to the radio from the bt setting... It's pissoffable... Help??
This short might help!
ruclips.net/user/shortsOLmIBIXHRFU?feature=share
My stereo went on mute..I hit a botton by accident and now I can't get my music to play loud infact can barely hear it
Mids for the vocals
How do i get to bluetooth connect my samsung ?
If your Bluetooth is on on your head unit you should just be able to go to Bluetooth on your phone and connect to it
What type kenwood headunit?
KDC-X696
How do I change the language 😅 I think I'm making things worse but I don't know it's in french and I'm english
just google it, mine allowed language choice when it was initially installed
Just picked this unit up at pep boys for $39.99
Good deal!
How do I factory reset this?
Mine resets to factory settings when I disconnect my car battery and then connect it again
i installed this radio with a mês sound system with speakers, amp and sub, but the radio keeps shutting down after a couple minutes playing, anyone else experiecing this?
I have an preset eq button
HPF? That filters certain frequencies................ does it filter ALL speakers??? I just want no bass going to my tweeters
It depends how your speakers are wired. If you have your tweeters wired to an amp then there’s probably an HPF switch on it
@@seancanoy amp only feeds 2 mtx 10s only.
Why when my volume is a turned up it sounds distorted
Your speakers could be blown
@@seancanoy I just bought these speakers I doubt it. I’m thinking it’s because I have them ran to my radio without an amp so the speakers dont have enough power, causing distortion. I’m really not sure tho
How do I charge it?
Charge what
@@seancanoy the in dash radio, it used to go up to past atleast 40 which was the highest i put it but now it only goes up to 35 and I’m assuming it’s because it’s getting low on battery. But that was when it was parked so I don’t know if when the truck is driving the volume goes higher
Your head unit never needs to be charged. It should be wired to a constant power source when the car is on. It could possibly be a setting that was changed that won’t let it go higher
I just want to turn on the Radio! The Box keeps showing "Audi Disconnect"
That’s annoying, did you connect it to your phone via 35mm?
Listened for two minutes. As long as I can hear the radio, all is good. Not critical of the sound.
Hell yeah
We get it buddy, you have a stock system.
@@goodcitizen379
Be Nice .. smh 🤔😏