How To Replace Front Brakes 2012-2019 BMW 328I

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APB...
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2012-2019 BMW 3 Series.
• Check here for more videos on the • BMW 3 Series 328xi 201...
This process should be similar on the following vehicles:
2007 BMW 328i
2008 BMW 328i
2009 BMW 328i
2010 BMW 328i
2011 BMW 328i
2012 BMW 328i
2013 BMW 328i
Tools you will need:
• Pry Bar 1aau.to/oE8/1AX...
• 8mm Socket 1aau.to/oaDB/1A...
• Pliers
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa6x/1A...
• Socket Driver
• Torque Wrench 1aau.to/oaeh/1A...
• Brake Grease
• Copper Anti-Seize
• Rust Penetrant
• sanding disc
• 6mm Allen Wrench 1aau.to/obV/1AX...
• Floor Jack 1aau.to/oLe/1AX...
• Jack Stands 1aau.to/oIE/1AX...
• Wire Brush 1aau.to/ooh/1AX...
Subscribe: / @trq
Check out our playlist:
BMW 3 Series 328xi 2012-2019 6th Generation F30: • BMW 3 Series 328xi 201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@Ojb_1959]

I wish you were my neighbor. Nice work!

[@abeq281]

Okay just out of curiosity. This might be a dumb question lol but could I just compress the position once the pads are out?

[@musclefactory9181]

Most definitely very precise and informative details. Perfect content. Thank you!

[@brickz76o87]

Bleeding the brakes necessary? Or just install and done?

[@maxamillion4223]

Looks like I can do this

[@CleverVagabond]

Is the replacement the same for the front and the rear?

[@t-stathvac5863]

This video was perfect abs very detailed. Thank you

[@anthonymoore8480]

Excellent job!!!🎉😊

[@8levity626]

Amazing video. Picked up some nice little techniques from you I greatly appreciate as well.

[@angeltrinidad7896]

Had to grind off my set screw 💔

[@maxamillion4223]

Is there anything electronic to do

[@ellstripe5185]

Do you need to buy the sensor or does the packaging come with them?

[@Ron-xb5vu]

need to buy. not included

[@natedavison7069]

Some come with it depends. I have to do my fronts and it was just pads

[@bdkrma911]

Do you need to get into the computer to tell it it's got new pads?

[@TRQ]

+bdkrma911 You do not need to reprogram the vehicle when installing the new brake pads.

[@kuyajon16]

Iloveyou