Fusion Friday: Machining NPT Threads
HTML-код
- Опубликовано: 24 июл 2024
- In this video Fusion Phil shows you how using Fusion 360 to Machine your NPT threads on both Lathes and Mills.
Chapters:
0:00 How to Model External NPT
3:07 Single Point NPT on Lathe
5:50 Thread Mill NPT on Mill
10:03 Like and Subscribe
Website
www.jitcadcam.com
Support Portal
support.jitcadcam.com
LinkTree
linktr.ee/jitcadcam Хобби
Muchas gracias me ayudo vastante para resolver este problema de como hacer una rosca macho NPT.
Genial, de nada
Update.
If you set your Thread pitch correct at the tool level (1/14 in my case not .057) it would come through correct on the toolpath Thread pitch.
Great video 👍
Thanks 👍
On a lathe you've made a conical thread, not an NPT. With the thread pass in the video you will have equal depth on the cone. To machine NPT you need to make an additional cylindrical surface with the OD equal to the NPTs' boss OD and use this surface in the threading operation. I've programmed and machined a lot NPT fittings using this method and were nice and tight.
were did you come up with 4deg ??
Been a min from when I made this video however if you look up the thread specs to what your trying to make it should give you the Degree at which your threads are needed to be Modeled.