A GIANT Aquarium, A Large Elevator Crane, A Very Hard Work

Поделиться
HTML-код
  • Опубликовано: 27 ноя 2024

Комментарии • 100

  • @bernardoferreira9255
    @bernardoferreira9255 3 месяца назад +1

    Perfection!

  • @savasisgoren6398
    @savasisgoren6398 Год назад +2

    İlhami bey, cam köşelerini zımpara yaparken maske, hem de özel bir iş maskesi takmanız çok gerekli.

  • @ultimatefishkeeping
    @ultimatefishkeeping 2 года назад +3

    Fantastic build.
    That Aquarium is beautiful.
    Thankyou very much for sharing. 👍🙂❤️

  • @peteryeung111
    @peteryeung111 2 года назад +5

    I had to say it, because I care. You are a master at your craft.
    Please wear eye protection and respiratory gear when sanding.

  • @ais2783
    @ais2783 2 года назад +2

    i can't stop watching so beautiful very perfectionist i think this guy is doing this for a very long time make it very easy and very clean job

    • @ais2783
      @ais2783 2 года назад

      if i have a tank like this made by a person love his job im gonna take care of it and im gonna cherish it forever

  • @wolfbeam5437
    @wolfbeam5437 2 года назад +2

    A master of working with glass and silicon. Unbelievable👏👏👍

  • @mr.robinson7083
    @mr.robinson7083 Год назад +1

    I enjoyed watching this very much . I see a lot of satisfaction, skill, craftsmanship and fun 🤩👍thank you so much.

  • @martijnvanbeek4387
    @martijnvanbeek4387 2 года назад +3

    Great craftsmanship and lovely to follow the build like this!

  • @nasirelvee7103
    @nasirelvee7103 Год назад +1

    Very very good job

  • @muhammetemin1092
    @muhammetemin1092 2 года назад +5

    Zoru başarmak kolay imkansız zaman alır adlı çalışma olmuş👏👏 maşallah Allah işini rast getirsin

  • @henrielroy5095
    @henrielroy5095 2 года назад +2

    when the aquarium started to go up, the inspiration master started to run. I wonder which one of you came out first?😂

  • @Yagmur-gq3ob
    @Yagmur-gq3ob Год назад +1

    O asansör çıkarken benim de aklim çıktı😬 nasıl aldınız onu nasıl götürdünüz merak ettim

  • @huseyincenik
    @huseyincenik 2 года назад +2

    Yapimdan kuruluma, taşımadan tasarıma kadar herseyi kendin yapmak yorucu oluyordur eminim fakat bu işini ne kadar iyi takip ettiğini ve herseyin bir kişinin elinden çıktığı için minimum hata olacağını ve hatta musteri için de tek muhatap olduğu için ayrıca kolaylık olduğunu gösteriyor. Tabi bu devirde böyle ustalar da çok az kaldı. Maşallah sana, ciddi söylüyorum sende başka bisey var. İş aşkı mı desem, yetenek mi desem bilemedim. Helal olsun 👍 Severek takip ediyorum

    • @baharcan2970
      @baharcan2970 2 года назад

      Aynen, bazıları sadece yapıp is yerinden teslim almamızı söylüyor. Daha once yaptırdığım bir akvaryum vardı 1.5 metre uzunluğunda, adam sadece yaptı. Guzel oldu ama nakliyeyi ve tasimacilari kendim ayarladım. Anlaşmalı olmadığım için galiba baya da tutmuştu. Akvaryum bana iki misli fiyata mâloldu. Hatta geçti bile. Neyse herseyin bir acemiligi oluyor diye avutuyorum kendimi 😁

  • @arowanagarage
    @arowanagarage Год назад +1

    amazing

  • @freddyaquinteroc6819
    @freddyaquinteroc6819 Год назад +1

    Hermoso tanque amigo

  • @ИльяОрлов-з1ь
    @ИльяОрлов-з1ь 2 года назад +1

    А мы такой на руках пёрли, вшестером.

  • @neeshrvlogs
    @neeshrvlogs 2 года назад +1

    THE GLASS CUTTING IS SO SATISFYING TO WATCH

  • @senolsabanc
    @senolsabanc 2 года назад +2

    Çoooook iyi oldu abi Ellerine emegıne saglik. Set halinde muhtesem duruyor.

  • @UCK1994
    @UCK1994 Год назад +1

    Waoooo 😍

  • @sezeroklegoman
    @sezeroklegoman 2 года назад +3

    Güzel olmuş

  • @jaisree9439
    @jaisree9439 2 года назад +2

    From India🇮🇳🇮🇳🇮🇳🇮🇳 me

  • @puteraali3052
    @puteraali3052 2 года назад +2

    Awesome 👍 I love 💕 it

  • @ugurtopraker5508
    @ugurtopraker5508 2 года назад +2

    Eline koluna sağlık usta, maşallah, Allah işini gücünü rast getirsin 🙋🏽‍♂️

  • @dannystoelzaet3318
    @dannystoelzaet3318 Год назад +2

    Merhaba İlhami Kul. Where I find Turkey Your workshop ? ? ? ? ?

    • @ilhamikul
      @ilhamikul  Год назад

      Merhaba. İstanbul Maltepe
      Whatsapp 0533 622 2626

  • @fahimahmed7931
    @fahimahmed7931 Год назад +2

    Can u please do a video on how sunk works and add English titles please

  • @s.m.38
    @s.m.38 2 года назад +1

    Sump efsane olmuş..

  • @ou812reefing
    @ou812reefing 2 года назад +1

    Another work of Art

  • @HenryCorleoeneSang
    @HenryCorleoeneSang 2 года назад +1

    Fantastic built, lucky customer.

  • @ОлегСафонов-ч9ш
    @ОлегСафонов-ч9ш Год назад +1

    Хорошая работа .Успехов.

  • @eyeinthesky74
    @eyeinthesky74 2 года назад +2

    You are a god with a mastic gun💯

  • @canhobihanem2629
    @canhobihanem2629 2 года назад +1

    Merhaba arkadaşlar çok güzel olmuş ellerine sağlık, Çorum yap

  • @dannystoelzaet3318
    @dannystoelzaet3318 Год назад +2

    Merhaba İlhami Kul, What are the standard dimensions of a completely large sheet of glass 12 or 15 mm. For example, the standard sheet of glass = 350 X 250 cm ? ? ? ? ? Then I can take that into account when ordering my size aquarium.

    • @ilhamikul
      @ilhamikul  Год назад +1

      Merhaba
      10mm 6000×3210
      12mm 3210×2250
      15mm 3210×2250
      19mm 3300×2140

  • @cagrkocacoban4230
    @cagrkocacoban4230 2 года назад +1

    Abi gerçekten harika, başından sonuna kadar emeğine sağlık. Kalitenin karşılığısın.👌

  • @mevrahandeoz4359
    @mevrahandeoz4359 Год назад +1

    😍

  • @Kundlarz
    @Kundlarz 2 года назад +2

    Mega👏👏👏👏

  • @ursupator1
    @ursupator1 2 года назад +1

    Sagenhafte Qualität.

  • @nedimmollahasanoglu9329
    @nedimmollahasanoglu9329 2 года назад +1

    Eline ayağına sağlık İlhami abim bu işin nirvanasi oldun ilk fırsatta seni ziyarete gelicem insallah kolay gelsin hayırlı işlerin olsun insallah

  • @s.m.38
    @s.m.38 2 года назад +1

    Çok güzel olmuş ustam eline sağlık,sump kısmına 30 cm yer ayrılmış anlaşılan güzel tasarım..

  • @TheJoshmaka
    @TheJoshmaka 2 года назад +1

    absolutely outstanding work

  • @chayoseno4625
    @chayoseno4625 2 года назад +1

    Great video, can you post it without music next time? I think it will be more relaxing, thank you.

  • @ajdjrjfnd
    @ajdjrjfnd 2 года назад +2

    İlham, cam işleme için hangi diski kullanıyorsunuz?

  • @احمدالقريشي-و5ع
    @احمدالقريشي-و5ع 2 года назад +1

    excellent

  • @V0LKaNNN82
    @V0LKaNNN82 2 года назад +2

    Akvaryum boyutu ve işçilik güzel fakat dekor kalıcıysa bence kötü olmuş. Balık olarak altum melek veya Rhom veya piraya güzel olur.

  • @brankhaykhondar1195
    @brankhaykhondar1195 2 года назад +6

    my biggest congratulations sir !!! just one question: can't such a large aquarium be too heavy for the apartment floor? how many liters are we talking about?

    • @senthilkumarp3347
      @senthilkumarp3347 2 года назад +1

      It will be approximately 1000 liters, this weight is nothing when compared to the apartment pile foundation.

    • @themanfromcabowabo1559
      @themanfromcabowabo1559 2 года назад +2

      As long as it’s against an exterior or load bearing wall it should be fine.

  • @akourmpetis
    @akourmpetis 2 года назад +1

    Very nice work and design!

  • @Kundlarz
    @Kundlarz 2 года назад +2

    Jest fach w ręku.!!!!!!

  • @uguryatkn7632
    @uguryatkn7632 2 года назад +1

    Eline sağlık abi muhteşem

  • @mahmoodalqaisi2661
    @mahmoodalqaisi2661 2 года назад +1

    Great work
    How much is thickness for black acrylic ?

  • @versam6319
    @versam6319 2 года назад +1

    Excellent work !!! How many millimeters is the thin of the glass ?

  • @benjaminfreeman6950
    @benjaminfreeman6950 2 года назад +3

    Where are you guys located? I love your work and especially the tanks you come up with. Thank you for the videos 😊

  • @antonioleonardobepu7820
    @antonioleonardobepu7820 2 года назад +2

    veryveryvery cleaannnn

  • @edeg9390
    @edeg9390 2 года назад +1

    masyaalloh.güzel ve çok çarpıcı, hep senin gibi bir akvaryum yapmak istemişimdir.. Endonezya'dan selamlar 🇮🇩

  • @38Sefer
    @38Sefer 2 года назад +1

    efsane yan sumplu

  • @jc49fishniner4lif7
    @jc49fishniner4lif7 2 года назад +1

    I really, really love the work you do,,, but one thing don't you think you need a mask for all that glass dust you're breathing,,, thanks for sharing this "AMAZING ARTS YOU CREATE" 👍💯💯🔥

    • @acidwaste00
      @acidwaste00 2 года назад

      Glass dust isn't same silica it's supposedly not as harmfull to lungs

    • @jc49fishniner4lif7
      @jc49fishniner4lif7 2 года назад

      @@acidwaste00 still maybe 🤔🤔

    • @acidwaste00
      @acidwaste00 2 года назад

      @@jc49fishniner4lif7 i wonder... well theres a kid named morning star guitars he makes guitars entirely from glass and he swears up and down he dont need a mask lol, im a glass worker as well and id still wear a mask during grinding a lot of dust really does kick up

  • @enesb.114
    @enesb.114 2 года назад +1

    Bu işin kralısın

  • @jimt5683
    @jimt5683 2 года назад +3

    Dam must be nice to be rich

  • @morpheusrelaxation4562
    @morpheusrelaxation4562 2 года назад +1

    What thickness glass fo you use and do you have any links to the cutters and guides you use?

  • @baharcan2970
    @baharcan2970 2 года назад +1

    Muhteşem 😍

  • @dannystoelzaet3318
    @dannystoelzaet3318 Год назад +2

    Merhaba İlhami Kul, How many mm is the thickness of the glass?

    • @ilhamikul
      @ilhamikul  Год назад

      10 mm

    • @ilhamikul
      @ilhamikul  Год назад

      Merhaba

    • @dannystoelzaet3318
      @dannystoelzaet3318 Год назад +1

      @@ilhamikul Merhaba İlhami Kul, What, this is far too little for such a large aquarium (230x70x50 cm), I think you should take at least 12mm! I hope it never breaks when it is full of water (800 liters) ! ! ! ! !

    • @ilhamikul
      @ilhamikul  Год назад

      @@dannystoelzaet3318 The water level in the aquarium is 45 cm so that's a sufficient glass thickness. but if the owner of the aquarium wanted thick glass on request, of course I would have made 12 mm

    • @ilhamikul
      @ilhamikul  Год назад

      @@dannystoelzaet3318 it has been working for about 6 months and so far no problems. I've made many tanks of this size before. No problems with any of them, they all work.

  • @darrenwicker4881
    @darrenwicker4881 Год назад +1

    Hey you have an amazing skill, just love watching this sort of thing come together, can I ask, I noticed you never clamp the tank while the silicon is drying, what sort of gap is left between the glass? Oh and what cutter would you recommend for 12mm glass, many thanks

    • @MrKnutriis
      @MrKnutriis Год назад +1

      The cutters are the same but you start with thinner glass - 12mm is for a large tank and not a project for a beginner.

    • @darrenwicker4881
      @darrenwicker4881 Год назад +1

      @@MrKnutriis I've built a few tanks and used the Toyo TC-600SVB which is a great cutting head

  • @jolalwahid3900
    @jolalwahid3900 2 года назад +2

    Question. Can your apartment floor stand all that weight?

  • @bjk12385
    @bjk12385 Год назад +1

    What were the two strips of glass on the bottom for? Strength? Leak protection?
    Beautiful tank by the way.

  • @michelrood2966
    @michelrood2966 Год назад +1

    Nice tank but the biotope is horrible

  • @benlin8886
    @benlin8886 2 года назад +2

    Is it too heavy for the building?

  • @madisongray2382
    @madisongray2382 2 года назад +2

    Why not assemble the glass panels up there? Wouldnt that be much easier? lol

  • @Tiersmoke92555
    @Tiersmoke92555 2 года назад +1

    #RPP

  • @akheelmohammed5290
    @akheelmohammed5290 2 года назад +1

    Please tell me …The glass you used to make the aquarium is 8mm or 10mm ?

    • @staticem1
      @staticem1 2 года назад +1

      I believe he uses 10mm you can see in the video it is visibly thicker glass

  • @deivis6971
    @deivis6971 Год назад +1

    👏👏👏👏👏👏👏🇧🇷🇧🇷🇧🇷

  • @kabzooj88
    @kabzooj88 2 года назад +2

    All that grinding glass is going to your lungs. I don't think that dust mask is that expensive.

  • @papuakreatif9089
    @papuakreatif9089 2 года назад +1

    Why u don't assembly at customer home?

    • @staticem1
      @staticem1 2 года назад +1

      I assuming it would be because he can build to a better quality at his workshop using correct space and tools. At someone’s house you risk damage to the glass during transport, damage to the property and there may not be enough space to assemble or a 100% flat surface to build it on. All these factors could effect the quality of the build.

  •  2 года назад +1

    Lütfen maske kullanın. O cam tozları çok tehlikeli.

  • @sadiylmzr
    @sadiylmzr Год назад +1

    Maske takmalisin

  • @Gaming87-k5n
    @Gaming87-k5n 2 года назад +1

    sioek lakeo popko hsuaol bahao

  • @Akvarist34
    @Akvarist34 2 года назад +2

    +Fiyat nedir ?
    -800 milyar efendim