KTM 690 Enduro R - Tail Tidy Secret
HTML-код
- Опубликовано: 7 сен 2024
- Codger Biker finally gets round to tidying the tail - with an eBay special. No connection to me but this is the one I got:
www.ebay.co.uk...
Codger Biker T-Shirt: teespring.com/...
Great video and thank you for the clear instructions. I too ordered the dbmoto tail tidy kit from eBay and am very pleased with the outcome and the integrated number plate light activation. I am in the USA and can confirm that the built in light can be activated on a 2023 KTM SMC R US Spec bike. The dbmoto tail tidy also fits the US Spec license plate size perfectly with no need of additional modification. It is very nice to have the factory tail light and I think that the dbmoto tail tidy is of good quality and easily the best looking available for the current generation 690 Endure/SMC R bikes. Similar to your thoughts, I too had concerns with the included scotch lock so I decided to use a splice/butt connector to run the green power wire from the body harness to the green and white wires (spliced together) on the tail light side, all wrapped with heat shrink for added peace of mind. The built in license plate light is plenty bright enough too. Thanks again for uploading the video!
No problem. Mine has been fine also after many months of riding. Thanks for watching! 👍👍
Nice video and thanks for the heads up because I went to check my screws that hold the license plate bracket & they were both missing, I just replaced them & used blue lock tight & a lock washer. Thanks, everyone ride safe 🙏
No problem, glad you noticed in time. I blue loctited mine (not always advisable in this kind of fittings) they stayed put and came undone okay (you can hear the snap in the video. 👍👍
@@CodgerBiker I hope with the blue lock tight & lock washer they stay put just fine, but thanks to your video I'm aware of the issue.
Awesome mod bud 👍🏻
Cheers. I ll see how it goes 👍
all still well with your tail end tidy up ordering mine tidy bracket now.
All has been fine. You get a little more dirt up the bike as expected, all good otherwise 👍
@@CodgerBiker can officially say I disassened bike and soldered power supply jumper this evening. Tidy bracket will arrive tmw. Thanks again for the great tip & video
great video, really helpful, many thanks!
Glad it's useful 👍
I think I remember hearing in a video that the USA have some weird throwback law with an issue against LEDs on vehicles. Can't remember what it is, but it made sense to somebody at the time 🤷🏻♂️
That looks better 👍🏼
I think it’s only some states (somebody will know) perhaps it’s a bulb syndicate thing😂 Cheers. I hope to lose fewer bolts 🤞👍
@@CodgerBiker Likely hidden as a 'safety' issue as you can easily replace a faulty bulb while on the road...
Could be. But they should look at an MZ 6v bulb indicator - virtually invisible 🤣
Hi there CB I've been following the adventures of 'Wolfgang' pretty much from the get go and found the content really useful and enjoyable. The first thing to mention is that I think the Faithfully reproduced guitar sample is Intro to 'Smash it up' by The Damned. (Not prompted by the sticker appearing on your rally tower btw, ??? Any 690 prizes gratefully received. I also benefitted from the £1500.00 discount on 2020 models and as a returning rider find the 690 more than enough everything for my skills at almost 60 y/o. Is there any chance I missed an episode featuring the Rider 550 from TomTom and how you set it up ? Salut !
Hello Scott. We must be the same age, more or less fellow codgers 👍😂 Yes it was Smash It Up, unfortunately you were the 2nd person to identify it. Bloody good though, my playing is not what it used to be. I didn’t actually show how I’d fitted the 550 to this bike, mainly because it uses the Rade Garage GPS bar, most people won’t have that. But if you want me to, by way of a prize, I can do so. Let me know what you want to know / see. Cheers 👍 Punk’s not dead! Just sleeping 😉
@@CodgerBiker Hi There CB thank you very much for the swift reply and please accept my apologies for a shamefully late response. I also have an April birthday shared with HMQE2 and a certain Mr. James Osterberg .... If the offer is still there I'd appreciate some wiring tips and I think will be ok using the Ram mounts although handlebar space is limited due to Cycra wraps.
One piece of guitarmanship i dont recognise is the intro to your channel, I was thinking it may be one of your own comps with that tasty Epiphone Les Paul ?
I found the seat height of my 690 a real challenge and even dropped the bike within the first 75 miles in local urban setting. The Hemel Hempstead (My nearest dealership) have just fitted the Rally Raid 40mm lowering link and its made all the difference. You really threw the A-list of mods to your bike and must have one of the rare Seat Concepts found in the UK. (out of my budget unfortunately.)
I just watched the 'Wayfarer 2 vlog what a track ! Ive also got a short story about meeting 'The Cult' then called 'Southern Deathcult Tribe' but enough ramblings for now.
Many thanks and Salut ! SV
@@scottverbeke359 Ha ha! I found your message. YT makes messages hard to find. I answered it in a reply to your previous message. I hope you find it. Southern Death Cult, permanent London fixture early 80s, wannabe native Americans in that incarnation - developing into a mega band via a circuitous route 👍
I need to do this! My left indicator is also fried from the exhaust!
It tidies it up 👍
good job it works great!
I think the law says the number plate has to have light to it , does not specify what colour , if the red light its bright enough and close to it its a pass
Well as it's already fitted I thought it easy to enable while it was apart. Passed MOT fine. 👍
Neat solution. Just wonder if you've noticed any more road crud being thrown up the back of the bike or up your back?
Not yet, but will report back in time. Hoping the plate catches it 👍
Nice! Where did you get those brackets? I want to keep the original lamp, most kits seem to include their own.
From the good old eBay. Just search ‘2019 690 enduro r tail tidy’. Mine’s a 2020, but it’s the same. 👍
www.ebay.co.uk/itm/163916058043?hash=item262a288dbb:g:j4QAAOSwcJVdo4MC
Hey mate when I did mine I just pulled the pin out of the plug and reinsterted it into the tail light plug that was blanked off. Hope this helps
Good stuff. I don't think mine had any wire at the blanked pin. Glad you sorted it. 👍
Hey. Great video. Can you provide link where you bought it?
I bought it a couple of years back from motosportiveuk on eBay. It’s been fine ever since. 👍
www.ebay.co.uk/usr/motosportiveuk
How do you activate the "secret hidden light" in the tail lens? Thank you
Connect the two wires as shown in video - without cutting through them. That's it. 👍
Hi, does it enough connect white and green to get the secret light on? or is there something else to do? Thanks in advance!
That's pretty much all I did. I think the light is there for other models, it just needs the power supplying to it But don't cut supply to the tail light, or it will go out. 👍
how did you plug and unplug that little piece of plastic stick inside the plug? for the life of me i cant get it out... don't want to break it. cheers!
Hello. Not sure I understand. The plugs have a lever that secures it against coming apart. (Stick?) You either (depending on type) press the lever and pull, or (different type) lift the lever and pull. A small screwdriver helps.
@@CodgerBiker thanks. I meant the internal connector for individual wires. Couldn't get the white plastic insert out.
Ah I understand. Usually they have a one-way barb of some kind. I did not remove it. Instead (if I understand) I simply bridged it, very carefully. Using a soldering iron to melt away a small amount of insulation. Then soldered bridge wire in and re-insulated both joints. No wires were broken. I can restore it to original just by removing the link.
What is the name of the tail tidy kit used in this video?
I got mine from eBay
www.ebay.co.uk/itm/163916058043?hash=item262a288dbb%3Ag%3Aj4QAAOSwcJVdo4MC
Awesome, thanks for the quick reply!