I've been looking to see if there were any tournaments in Asia with Roar Tyranno being used being that here in the West we would use TT and Hasbro both but I haven't seen any of the Asian youtubers even mention that the Hasbro exclusives exist. You'd think as a collector more would want the exclusive product they can't just buy in a store.
Hey! Thank you for watching. I think you’ll find it’s becauseW hasbro parts aren’t legal in most tournaments here as we have a huge infrastructure for official tournaments run by TT already. Also they aren’t exclusive to Hasbro they’re just being released by Hasbro earlier than TT have done. So far we’ve had Bear & Ptera released in Asia. Also with wave 2 only just starting to become commonplace in the west it’s been too expensive to try to import something like a Roar Tyranno.
Tusk mammoth is a lighter version with worse contact points that scythe and you’re correct scythe has been pushed out of the top tiers already. Every part has a chance but I don’t think mammoth has much of one
Yo! For Buster my most successful combos have been 5-60 & 9-60 LF, for Chain I like it on Orb and dagger I like on T or P. I’d build DB5-60LF, HC9-60O & DD3-60T myself :)
This is a super random question, but i cannot seem to find the answer anywhere, so hoping someone that does tournaments can help out! The rules say "your launch can't interfere with your opponent" what does that constitute? If my opponents rip cord goes into my half, so I can't put my launcher where I want in my half without hitting it, would you say that qualifies?
If it’s interrupting where you want to launch from on your side then yes you can talk to the judge before launching. If my opponents ripcord is where I want to put my hands though I set up my launch there anyway, it’s my half of the stadium. If the judge still lets them or if they still want to launch from there it effects their launch more than your own. I wouldn’t stress about it too much though. Nothing wrong with being a bit in your face at tournaments but if it’s super casual they should chill 😂
@BladeBeyX yeah currently it is myself and some friends wanting to go to events, and we come from TCGs where rules are super hard enforced. We all just wanted to know what it meant before going somewhere and we broke some unwritten taboo or something haha.
@@davidewh1356 yeah good thing to ask bro. Just try not to be obnoxious and you should be fine. It’s only really little kids at tournaments that go a bit wild with their hand placements 😂
They aren't "hasbro retools" lets stop calling them that. TT is releaseing their talon, also THEY made all of them. The "hasbro" beys are made at the same factor. Hasbro doesn't make them. And they aren't "retools" they are just BX beys. The only beys who's blade will be just for them are the UX, you know for Unique. The BX beys are another class and their blades are not unique to them. Dransword is the first time we saw that version of the Sword Blade. Shark edge is the first time we see the Edge blade, knight shield is the Shield blade. Then Arrow blade, Horn blade an so on. The second portion of the name is the official blade TYPE. So talon ptera would by another example of the Tail blade since it was introduced through Viper Tail.
well said my dude, although I wouldn't call them a "second release" of a blade, i like to see them as their own blade, because for some of them, their performance is actually quite different despite using the same plastic components (For example, Talon Ptera has much better upper attack capabilities than Tail Viper). Also, let's remember that the Beys that Hasbro releases before Takara Tomy (probably none of them will remain "exclusive" to Hasbro forever) are not the only ones that use the same plastic component as other existing ones, for example, Phoenix Feather, which uses the same plastic component as Sword Dran hasn't been released by Hasbro yet
I’m pretty sure in the first few minutes of the video I say that they are TT designs that hasbro have just released first. Thanks for sharing though. However I believe Hasbro retools is a pretty accurate statement as they are retools of other blades and have been released by hasbro. Interested to see which one TT will reveal next.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Quality content as always Blade, hope we see some more Hasbro blades in TT soon! I want me a croc 🐊
Thank you my guy! Yeah I got mine in the unicorn double pack but we’ll definitely see all these retools in TT releases!
I've been looking to see if there were any tournaments in Asia with Roar Tyranno being used being that here in the West we would use TT and Hasbro both but I haven't seen any of the Asian youtubers even mention that the Hasbro exclusives exist. You'd think as a collector more would want the exclusive product they can't just buy in a store.
Hey! Thank you for watching. I think you’ll find it’s becauseW hasbro parts aren’t legal in most tournaments here as we have a huge infrastructure for official tournaments run by TT already. Also they aren’t exclusive to Hasbro they’re just being released by Hasbro earlier than TT have done. So far we’ve had Bear & Ptera released in Asia.
Also with wave 2 only just starting to become commonplace in the west it’s been too expensive to try to import something like a Roar Tyranno.
15:42 ALLEGATIONS!!! My hands were cold.
Stone cold disrespect 🥶
Great video man!!
Thank you as always my guy 🫰🏽
I like to use the Term Echos for the lookalike blades, but maybe im just too smash pilled.
lol I like that too
Why is Tusk Mammoth bad? Isn't Hell's Scythe still one of the best stamina blades (although very outclassed by the top 2 Wizard and Wolf)?
Tusk mammoth is a lighter version with worse contact points that scythe and you’re correct scythe has been pushed out of the top tiers already. Every part has a chance but I don’t think mammoth has much of one
Roar !!! What a beast!!
It’s pretty nice doooooddd!
Hey what combo do you reccomend for dranbuster hellschain and dran dagger
Yo! For Buster my most successful combos have been 5-60 & 9-60 LF, for Chain I like it on Orb and dagger I like on T or P. I’d build DB5-60LF, HC9-60O & DD3-60T myself :)
i just realized in all tournaments i have been running hasbro only lmao
What’s your deck?
This is a super random question, but i cannot seem to find the answer anywhere, so hoping someone that does tournaments can help out!
The rules say "your launch can't interfere with your opponent" what does that constitute?
If my opponents rip cord goes into my half, so I can't put my launcher where I want in my half without hitting it, would you say that qualifies?
If it’s interrupting where you want to launch from on your side then yes you can talk to the judge before launching.
If my opponents ripcord is where I want to put my hands though I set up my launch there anyway, it’s my half of the stadium.
If the judge still lets them or if they still want to launch from there it effects their launch more than your own. I wouldn’t stress about it too much though. Nothing wrong with being a bit in your face at tournaments but if it’s super casual they should chill 😂
@BladeBeyX yeah currently it is myself and some friends wanting to go to events, and we come from TCGs where rules are super hard enforced.
We all just wanted to know what it meant before going somewhere and we broke some unwritten taboo or something haha.
@@davidewh1356 yeah good thing to ask bro. Just try not to be obnoxious and you should be fine. It’s only really little kids at tournaments that go a bit wild with their hand placements 😂
I like using Talon Ptera 3-60T and it's really good, It has insane upper attack and great stamina
Nice! Big fan of taper. The old skool combo used to be VT5-60R if you want to try it with ptera :)
That would be cool... If only i had 5-60 or the Rush bit 😅
@ 😅
Let's goooo🔥🔥🔥
It’s time!!!🔥
Actually Talon Ptera is a great attacker
Yeah VT was good early in X for attack so Petra should be decent. I think it’s best off as a stamina build though :)
They aren't "hasbro retools" lets stop calling them that. TT is releaseing their talon, also THEY made all of them. The "hasbro" beys are made at the same factor. Hasbro doesn't make them. And they aren't "retools" they are just BX beys. The only beys who's blade will be just for them are the UX, you know for Unique. The BX beys are another class and their blades are not unique to them. Dransword is the first time we saw that version of the Sword Blade. Shark edge is the first time we see the Edge blade, knight shield is the Shield blade. Then Arrow blade, Horn blade an so on. The second portion of the name is the official blade TYPE. So talon ptera would by another example of the Tail blade since it was introduced through Viper Tail.
hasbro already has UX though? i don't get what you mean
@@bntrsyea hasbro has ux already i dont understand
well said my dude, although I wouldn't call them a "second release" of a blade, i like to see them as their own blade, because for some of them, their performance is actually quite different despite using the same plastic components (For example, Talon Ptera has much better upper attack capabilities than Tail Viper). Also, let's remember that the Beys that Hasbro releases before Takara Tomy (probably none of them will remain "exclusive" to Hasbro forever) are not the only ones that use the same plastic component as other existing ones, for example, Phoenix Feather, which uses the same plastic component as Sword Dran hasn't been released by Hasbro yet
You're on drugs mate
I’m pretty sure in the first few minutes of the video I say that they are TT designs that hasbro have just released first. Thanks for sharing though.
However I believe Hasbro retools is a pretty accurate statement as they are retools of other blades and have been released by hasbro.
Interested to see which one TT will reveal next.
Hey bud my tyranno running 7-60 rush is still awesome and smashes most even phoenix
Nice! It was on Hexa before right?
@BladeBeyX yeah switched out to rush and it's been awesome and 7-60 makes it a bit more sturdy
@@philipmunday2350 I'm a big fan of 7-60 and the new 7-70. I always use them with a high burst resistance bit and a heavy blade!
@BladeBeyX yeah they are awesome and I have plans for 7-70 with knight mail see how that does
@ nice! I’ve got KM on 7-60R right now 😂
I was here........at the end
Juice the Alpha & Omega!
Let's fucking go, King 🥳
My guy with the hype!🔥🔥🔥