New to this series of vids! LOVE it Kris! Great job! Actually used your VOM ground issue chasing vid earlier today and got everything all dialed in! TY!
Maybe a bit beyond your target audience for basic set up, but neck radius can play a big role is setting action (particularly for old Fenders with a neck radius of 7.25 inches - not so much an issue with flatter radiused necks). Its not enough to make sure your string doesn't buzz (beyond what you can tolerate) when straight. If your playing style includes bends, make sure you can do the bends you want to do without "fretting out" before you settle on the action. Also, although you did it, your didn't mention that intonation is best done holding a guitar in a playing position (especially a trem guitar). For that matter, so is saddle height adjustments.
Thanks for the additional infos Donald!! I agree of course. The only reason I didn't talk about fretting out on round fretboards, is because there are literally no affordable guitars with a 7.25" radius. That's more of a thing to consider when going for mid priced Mexican Fenders and above (custom shops, etc). As for the intonation: you're 100% right, intonation setups are more precise when done in playing position. Thanks again! //Kris
Thanks a bunch! These aren't the stock pickups, I've put these Fishman Fluence Classics in the Harley and they sound pretty awesome. If you want to see how that went, check out my modding series here: ruclips.net/video/JzpKOSvNGMc/видео.html //Kris
How do I set up my Dobro?? The spider rattles bad on one leg and the bridge spider just sits (bolted to) on a floating cone?? do I just string it up and move stuff around by pushing it with a pencil or something till the intonation is close to correct, cause that’s what I did?!?. Do I try to reshape the cone so the rattling leg of the spider makes tighter contact or … I should probably get a book. And learn how to play slide, yea I definitely need a book and probably a teacher, but any advice would be greatly appreciated. Metal guitars 🤘🏽
Hey, thanks a lot! I was using the Archer, into Carl Martin Panama, into REVV D20. Then instead of using a cabinet, I was using the D20s built in Two Notes Cab Sim. Cheers //Kris
Truss rod adjustments should be accurate, not eyeballs or based on feel but a feeler gauge and set to a given spec. This then facilitates better results when adjusting the bridge for action which is what sets the feel of a guitar. Any other way, you're just never gonna get the best out of your setups.
Hey Tony, for a beginner I'd say eyeballing it with the right way of checking it (as shown in the video) is way better than being overwhelmed by all the numbers and measurements. That freaks beginners out and then they just don't set up their guitars at all. That's the worst that could happen. Also important piece of info: most of the star guitar techs I've talked to had to search for their notes to tell me the neck relief. They don't even know it by heart, because they never measure it anymore. They check the relief the same way I do it and adjust it based on feel. Measurements are very important of course, but in many cases experienced techs will work based on feel. Again, there's no general right or wrong. It all depends on the circumstances. Cheers //Kris
@@ThomannsGuitarsBasses nah. As a tech I disagree. If a player isn't gonna check neck relief accurately and correctly then they are best off leaving it alone. It's impossible to eyeball the relief required, usually 0.002 to 0.010" depending on the guitar. You mention 1mm. If you're talking such big measurements and you have a relief of over 1mm, you got some truss rod turning to do. Do it right or leave it alone I say.
Hey Clayton, thanks for the comment but you're knocking on the wrong door. :D Write a comment on a Hit the Tone episode, that way Guillaume can see it and make the episode if possible. Cheers! //Kris
While I respect your opinion I tend to disagree with using truss rod to adjust action..a lot of new players don't understand that there's a set measurement range of neck relief and they just start cranking the truss rod to lower the action and create a mess...
I've done that to my poor Ibanez about a year ago out of laziness... Need to take it to a luthier because no matter what I do now the truss never feels right.
@@TitaniusAnglesmith yeah,,, I've been playing 25 years and I can count on one hand how many times I've needed to adjust trussrod.. I like it almost dead straight with about.005 relief at most..if your fretwork is good you can get away with little relief..
![How To Refret A Guitar [EASY and MINIMAL TOOLS TUTORIAL]](http://i.ytimg.com/vi/SkzROuq2-2M/mqdefault.jpg)
Well done Kris. Great, clear, concise presentation.
Thanks a lot Don! //Kris
New to this series of vids! LOVE it Kris! Great job! Actually used your VOM ground issue chasing vid earlier today and got everything all dialed in! TY!
Excellent video.
Heh! Even I could understand it!! Nice job!
Thanks Kris! 😊👍
Thanks a lot Boomer! :) //Kris
Man I be wanting the tele version in that silver sparkle with the roasted flame maple those things look and sound awesom
Maybe a bit beyond your target audience for basic set up, but neck radius can play a big role is setting action (particularly for old Fenders with a neck radius of 7.25 inches - not so much an issue with flatter radiused necks). Its not enough to make sure your string doesn't buzz (beyond what you can tolerate) when straight. If your playing style includes bends, make sure you can do the bends you want to do without "fretting out" before you settle on the action. Also, although you did it, your didn't mention that intonation is best done holding a guitar in a playing position (especially a trem guitar). For that matter, so is saddle height adjustments.
Thanks for the additional infos Donald!! I agree of course. The only reason I didn't talk about fretting out on round fretboards, is because there are literally no affordable guitars with a 7.25" radius. That's more of a thing to consider when going for mid priced Mexican Fenders and above (custom shops, etc). As for the intonation: you're 100% right, intonation setups are more precise when done in playing position. Thanks again! //Kris
Nice overview. Also nice sounding pickups. Are those the stock ones?
Thanks a bunch! These aren't the stock pickups, I've put these Fishman Fluence Classics in the Harley and they sound pretty awesome.
If you want to see how that went, check out my modding series here: ruclips.net/video/JzpKOSvNGMc/видео.html
//Kris
How do I set up my Dobro?? The spider rattles bad on one leg and the bridge spider just sits (bolted to) on a floating cone?? do I just string it up and move stuff around by pushing it with a pencil or something till the intonation is close to correct, cause that’s what I did?!?. Do I try to reshape the cone so the rattling leg of the spider makes tighter contact or … I should probably get a book. And learn how to play slide, yea I definitely need a book and probably a teacher, but any advice would be greatly appreciated.
Metal guitars 🤘🏽
Doh!bro 🤪
@@boomerbassmeme I got lots of questions yo!
@@PooNinja I bet Kris has some answers too! The Homer joke was there, couldn't resist it! 🤪
@@boomerbassmeme someone said my resonator looks like Homer 😂
@@PooNinja does it go Bart when you pick a string?! Maybe you have Homer, not a Honer! 🤣
How about parallel wiring video? 🤔
What’s the amp (or device) used in this video? Sick tones with the HB!
The REVV + Wampler pedal in the back?
Hey, thanks a lot! I was using the Archer, into Carl Martin Panama, into REVV D20. Then instead of using a cabinet, I was using the D20s built in Two Notes Cab Sim. Cheers //Kris
Truss rod adjustments should be accurate, not eyeballs or based on feel but a feeler gauge and set to a given spec. This then facilitates better results when adjusting the bridge for action which is what sets the feel of a guitar.
Any other way, you're just never gonna get the best out of your setups.
Hey Tony, for a beginner I'd say eyeballing it with the right way of checking it (as shown in the video) is way better than being overwhelmed by all the numbers and measurements. That freaks beginners out and then they just don't set up their guitars at all. That's the worst that could happen.
Also important piece of info: most of the star guitar techs I've talked to had to search for their notes to tell me the neck relief. They don't even know it by heart, because they never measure it anymore. They check the relief the same way I do it and adjust it based on feel. Measurements are very important of course, but in many cases experienced techs will work based on feel. Again, there's no general right or wrong. It all depends on the circumstances. Cheers //Kris
@@ThomannsGuitarsBasses nah. As a tech I disagree. If a player isn't gonna check neck relief accurately and correctly then they are best off leaving it alone.
It's impossible to eyeball the relief required, usually 0.002 to 0.010" depending on the guitar.
You mention 1mm. If you're talking such big measurements and you have a relief of over 1mm, you got some truss rod turning to do.
Do it right or leave it alone I say.
Could you do a hit the tones on Flicker by Submersed both solo tones are kind of stumping me to be honest
Hey Clayton, thanks for the comment but you're knocking on the wrong door. :D Write a comment on a Hit the Tone episode, that way Guillaume can see it and make the episode if possible. Cheers! //Kris
@@ThomannsGuitarsBasses Alrighty, thank you. I’ll do that.
While I respect your opinion I tend to disagree with using truss rod to adjust action..a lot of new players don't understand that there's a set measurement range of neck relief and they just start cranking the truss rod to lower the action and create a mess...
I've done that to my poor Ibanez about a year ago out of laziness... Need to take it to a luthier because no matter what I do now the truss never feels right.
@@TitaniusAnglesmith yeah,,, I've been playing 25 years and I can count on one hand how many times I've needed to adjust trussrod.. I like it almost dead straight with about.005 relief at most..if your fretwork is good you can get away with little relief..
New haircut?
Hey, not too new. :) More like one and a half years old. haha
//Kris