if the oil is brown theres water in the oil, hydraulic fluid and water mixed is not a match. water makes the hydraulic pump incredibly weaker and slower
You must emty the transmission fore the bad oil the av clean good before you skrew it to gether agin, or will the oil freeze and been destroyed oilpump
I just bought a Ferguson TO-35 with the same front end loader. Do you know the model of the front end loader? I'm trying to find a hydraulic control valve rebuild kit for it.
my massey 30 industrial is doing the same thing. i ordered a lift cylinder and rockshaft housing. it was bleeding there. hopefully this fixes the jumping 3 point.
@@Outlawthis I have a 1973 mf35 and the front end loader will go up but jumps slowly down and it seems like the motor is tight also I was wondering if you would know anything
@@Flynn-411 if the loader has its own hydraulic pump like mine does, i would be looking at taking the pump off and taking it apart.. it could also be in the valve body of your controls. thats a whole other can of worms though
@@Outlawthis thank you and I don’t Believe it’s the pump because the 3 point on the rear works fine and the day before the loader was working smooth and now it just started acting up when I was mowing the fields but thank you
You are saving people SO MUCH work they have no idea THANK YOU
if the oil is brown theres water in the oil, hydraulic fluid and water mixed is not a match. water makes the hydraulic pump incredibly weaker and slower
You must emty the transmission fore the bad oil the av clean good before you skrew it to gether agin, or will the oil freeze and been destroyed oilpump
My 175 Massey the hydraulic pump is not turning, the secondary pump has air bubbles coming from underneath
I have an issue where my 35s lift arms will only go up if you use the draft levers and not the actual lever
I just bought a Ferguson TO-35 with the same front end loader. Do you know the model of the front end loader? I'm trying to find a hydraulic control valve rebuild kit for it.
Yes the loader is a model 99
That looked like vegetable soup and not oil in that gearbox
What causes ,the hydraulic to go up and down, vibrating? Mf65
my massey 30 industrial is doing the same thing. i ordered a lift cylinder and rockshaft housing. it was bleeding there. hopefully this fixes the jumping 3 point.
@@Outlawthis I am going fit another hydraulic pump soon, also checking the top RAM seal and try some adjustment
@@Outlawthis I have a 1973 mf35 and the front end loader will go up but jumps slowly down and it seems like the motor is tight also I was wondering if you would know anything
@@Flynn-411 if the loader has its own hydraulic pump like mine does, i would be looking at taking the pump off and taking it apart.. it could also be in the valve body of your controls. thats a whole other can of worms though
@@Outlawthis thank you and I don’t Believe it’s the pump because the 3 point on the rear works fine and the day before the loader was working smooth and now it just started acting up when I was mowing the fields but thank you
What year is the tractor
1963