Neuson 1903 + Stielverlängerung / Löffelstielverlängerung
HTML-код
- Опубликовано: 6 фев 2025
- Herstellen einer Grube zum Versetzen von Schachtringen, Grubensohle -4,00m gemessen von OK Gelände.
Stielverlängerung ist Eigenkonstruktion. Gebaut aus einem Löffelstiel eines für das Schlachtfest freigegebenen Kubota KH41 Minibaggers.
Ohne Verbau ????
Sehr Vorbildlich,min. tiefe 1,25 cm bei nicht bindigen Böden schon früher.
auch der min. abstand vom bagger zur baugrube ist auch deutlich unterschritten bei dieser gruben tiefe !!!!
aber wie sagt man so schön es ist ja nichts schief gegangen !
those little excavators are actually surprising fast, I borrowed my buddys to do a septic tank when I built my house figured id save some money instead of renting a bigger one if I just spend the time and do it myself but it only took me maybe 6 hours to dig everything and then a few more once everything was installed to cover it, it was a little bigger than whats in the video tho but a lot more digging
how cool is that :) well done mate !
genial da weis ich was ich im winter machen kann
put some lights and a cctv on the extension joint and a monitor in the cab and it would be alot safetr and comfortable for the operator. and don't forget your shoring with trenching work.
cheers work smart work safe.
Alter Schwede!!!!!!!!!!!!!! Zuerst dachte ich ja du seist ein Sicherheitsfanatiker,wegen dem Seil am Bagger,aber meinen ersten Eindruck hast du mit diesem Film zerstört. Trotzdem super Videos! Dann kannst du auch keinem anderen die Schuld in die Schuhe schieben sollte mal was passieren! Weiter so!
Wieso er hebt nur ein Loch für einen Kanal Schacht aus?
@deHeisinger
Ja, wir sind alle begeistert. Besonders, wenn andere ihr Leben riskieren, um dich wieder aus der Grube freizuschaufeln....
Du trottel es ist keiner in dem Loch
Have you ever seen a trench cave in? it kills more excavation people then any other accident....put your ego aside and learn from this....shoring or benching the hole back is very important. You have good operator skills, dont forget safety skills :)
Die Verlaengerung ist Spitze...guter Einfall!
I think it says this below video:
"Making a pit for placing of manholes, measured -4.00 m of top pit bottom area.
Stem extension is designed in-house. Constructed from a dipper of a shared hard battle for the Kubota KH41 Mini excavator."
That's some deep digging there. You're name wouldn't happen to be Dan would it?
Nice, safe hole to work in.
ganz erlich ohne verbau würd ich da net runter gehen bin doch net lebensmüde
Very safe.
What would someone be doing down there without shoring?
nice one
muy buena esta maquina las picinas
whats up with the dump truck in the backround. is this a school for ants!?
why he is doing it ? just for fun ?
he has dug so much that it would take him a month to put it all back.
Very easy to fall out of machine be carefull.
I never tried a Neuson before. Only Schaeff, but i wonder if the controls is the same?
I like it
Schöne Demo, gute Arbeit - etwas mit Risiko verbunden weil der Bagger so dicht am Loch steht.
Mann wenn das die BG gesehen hätte, ohne Verbau so tief Baggern !!!!
nicht schlecht die idee und umsetzung!!!
aber man weiß das 1,25m beöscht werden muß und ab 1,75m ein verbau erein muß ;-)
das rote wunder, außen plastik innen plunder !
No protection against a cave in. What if it collapse when someone was in the pit...?
heel mooi
Aditya Kishna nfdm
ach was das geht imer rein da :-)
Brian Thomas evry excavator can dig under them selves ;) The limitation is the driver ;)
Hi can you show me how can i open the hood of neuson thx?
looks like he is digging his own grave
is this for a septic tank (sewer box)
👍
What is that hole for?
It seems not...
A little crativity, and it was big enough. I wish I had that arm on my 1,3-ton when digging the same kind of pit 2,5 meters down.
muito bom
looking for gold? or what? just like to diging))
what is this RC EXAVATOR
yep completely the wrong machine for the job ,but I bet the contractor saved a couple of bucks instead
1
Not very good planning I would say!! The contractor made $$$$$$ on this home owner!!! Bent them over with no lube!
A possible solution - remote control operator
good
Solch kleines Gerät,für diese Arbeiten ist es doch einfacher mindestens ein 5 Tonnen Bagger einzusetzen.Mit dem kleinen Gerät dauert es doch zu lange,wie wurden die Schacht - Ringe
gesetzt,das wurde nicht gezeigt,wer geht denn in eine 4 m Baugrube ohne Verbau ? -
Wahnsinn !!
torstenlore man kommt ja mit nem 5 T net überall hin die 1.6 T Bagger passen meist überall durch nen 5 T nicht
This thing can dig really deep but why so deep China's not far away. Ha! Ha!
Germans should concentrating in making good machines. The use of these machines should be left for other experts on how to use it!
Who is stupid enough to go into a hole this deep without any trench shoring!
uni000ver000sal The guy has got his excavator vertical onto the hole so it puts less pressure towards the trench... ( 2:10 )
Farmer Ash I am sorry but I don't agree, putting it vertical is even worse, also the trench appears to be undercut as well. The top part of the material he is digging also appears to be quite clay and soft. One extra reason to use trench shoring! His operating skills are fine but the methodology is wrong. All I can say if you keep pushing your luck, it will run out one day. All the best.
+uni000ver000sal GERMANS ?
I think he is gonna be ok... I can see where you're coming from, and I'm sure this guy would apply it for a bigger, deeper hole or large tractor.
uni000ver000sal bbnjmm,,lol.rfghhjj
donde puedo comprar una
Die Schaufel isn joke..
supar
еще чуток и дороется....
shiiiiitt......
He have big bottom muskles!
what do you doing
fun
парень нефть ищет
와~~~~~
he must have a cranes neck bet it sore
장난감ㅇ네
bob budowniczy
NO NO NO NO NO FOR SALE NO NO NO NO NO NO NO FOR SALE HOUSE
HOUSE FOR SALE $ OFFER OFFER OFFER OFFE
senden korkmuyorum int. inanmıyorum
Sema Karacan neye inanmıyorsun?
Bestimmt hobby bauarbeiter Mit miete gerät
Wieso?
Wenn ich mit einer Maschine an ihre Grenzen Stoße, muss ich etwas Größeres/Leistungsstärkeres ranschaffen. Die zu kleine Maschine für die zu großen Arbeiten aufzurüsten ist Quatsch.
Kevin Kühn wen sie das nötige Geld also so 50K hätte er das machen können bin Galabauer ich weiß was die teile kosten haben selbst nen E16 Bobcat sind selbstständig
Solch ein Video würde ich nicht einstellen,nichts abgeböscht alles senkrecht und dann der Bagger noch seitlich zu Graben, voll der Anfänger 🤐