Preparing for Mastering: What Files (And Levels) Do I Need to Send to the Mastering Engineer?

Поделиться
HTML-код
  • Опубликовано: 6 янв 2021
  • What kinds of files should you be sending to your mastering engineer? Should you be leaving your buss processing on or off? How loud should your mixes be? Justin Colletti answers all this and more in today's episode.
    Want the short answers? Here goes:
    -What files types should I send?
    Send full resolution WAV files. Send them at whatever bit depth and sample rate you were working on in your session. If you were working at 24/88.2 send that. If you were working at 24/44.1, send that!
    -Should I leave my bus processing on, or take it off?
    Leave on any processing that was part of your MIX! If you mixed through a compressor, or an EQ, or a limiter, or any other bus processors, leave them on.
    If you added them at the end of the process, just for loudness, leave them off. (Though it can't hurt to also send your own attempt at mastering to give your mastering engineer something to "beat".)
    -How LOUD should my mixes be?
    In this day and age, it doesn't really matter too much! But you'll probably want to send your mixes a bit quieter than you want the final master to be.
    A final master in rock and pop genres may often end up anywhere between -14LUFS and -9 LUFS on a loudness meter. So sending files that are on the lower end of that spectrum, or even lower than -14LUFS is good way to go.
    A super "safe" range to mix at would be -22LUFS to -16 LUFS for these genres. But if you're getting a great sound by going substantially louder, have at it!
    Electronic dance-oriented genres will often end up between -9 LUFS and -5 LUFS after mastering. A good "safe" range for mixing would be -12 to -10 LUFS. But again, feel free to mix louder if you are getting great sounds.
    Hip hop masters are often somewhere in between, and can often end up anywhere from -13 LUFS to -6 LUFS after mastering, depending on the subgenre or style. Mixing a little bit lower than where you expect your mix to wind up in the end is a good call.
    ►Get the free mastering workshop: sonicscoop.com/Mastering101
    ►Get the free mixing workshop: sonicscoop.com/MixHabits
    ►Win free stuff at sonicscoop.com/contest
    ►Subscribe to the podcast or leave a rating and review here: podcasts.apple.com/us/podcast...
  • ВидеоклипыВидеоклипы

Комментарии • 65

  • @foreverthestudent
    @foreverthestudent 2 месяца назад

    That negative
    I don't care was GOLD

  • @davidasher22
    @davidasher22 3 года назад +7

    Damn! That was a good one. I especially enjoyed the “Negative... I Don’t Care”. 😂 I’m gonna use that next time I get caught up in one of those online forum debates where some guy is telling everyone you have to have 6db of headroom or the engineer won’t take the job. Oh wait! That already happened today. SMH.

  • @yazansakran3326
    @yazansakran3326 3 года назад +2

    This guy has too few views and likes for the gold he is sharing. Thanks for the information!

  • @darrenogden7962
    @darrenogden7962 3 года назад +1

    Super informative and a great delivery as always. Thanks for sharing your insight, you’re a great teacher!

  • @vocalproductionandeditings9322
    @vocalproductionandeditings9322 3 года назад +1

    On all levels this is such an informative video. Great job.

  • @MiguelLSilva-ef5is
    @MiguelLSilva-ef5is 2 года назад +1

    Super interesting as always!

  • @richardbradley5936
    @richardbradley5936 4 месяца назад +1

    Beautifully said! You confirmed a lot of things I had been wondering about! Many thanks 👍

  • @stupendousmusic4190
    @stupendousmusic4190 3 года назад +1

    Good stuff Justin!

  • @uguroktem8143
    @uguroktem8143 3 года назад +1

    Thank you so much. This is the end of many discussions ;-)

  • @reymartrapsi7315
    @reymartrapsi7315 3 года назад +1

    Thank you Justin. Very precious insights. 😎

  • @curiowatts2505
    @curiowatts2505 3 года назад

    this was everything i needed to know. thank you!

  • @heavymetalmixer91
    @heavymetalmixer91 3 года назад

    Gotta share this video with some friends and mixing engineers, it's a summary of everything I tell people all the time.

  • @goddaddybeats4582
    @goddaddybeats4582 2 года назад +1

    Awesome video! I was looking for info on bouncing my instrumentals to "master" for shopping to artists.. But this info was very useful at knowing how to prep a final mix for a full song!!!

  • @gritsguitar
    @gritsguitar 3 года назад

    Excellent work....thank you!

  • @sgfdancecompany
    @sgfdancecompany 3 года назад +1

    Great podcast Justin!!!! Especially for the mastering with stems moment, only useful; from my humble point of view, when you are working with movies and TV shows music.

  • @dropwave9
    @dropwave9 Год назад +1

    Super great information. Love your channel. Great work!

    • @SonicScoop
      @SonicScoop  Год назад

      Awesome to hear Cory! Please remember to subscribe and hope to see you around more :-)
      Very best,
      Justin

  • @sethmichaelpinder
    @sethmichaelpinder 3 года назад

    Awesome! Thank you kind sir. Big help!!🤘🤘

  • @capntar
    @capntar 5 месяцев назад

    Thanks for explaining this clearly.

  • @D00shi
    @D00shi 3 года назад

    great as always, thnx a lot

  • @_MoOx_
    @_MoOx_ 2 года назад

    Thanks for the precious advices

  • @vintergravofficial
    @vintergravofficial 2 года назад +1

    As a solo artist, this has helped me quite a bit. I was just asking my engineer buddy about this because I’m preparing to send off my full length to be mastered after mixing it myself. I’m sitting here trying to keep it “loud” but also kill the peaking and he just told me “you’re gonna wanna send it off quiet, adjust your levels. They’ll do the leg work there for you”.
    Thank you!

  • @samsmall
    @samsmall 3 года назад +4

    Great advice from the master mastering engineer.

    • @SonicScoop
      @SonicScoop  3 года назад +1

      From a master songwriter?? I'll take it! -Justin

  • @barbierash2137
    @barbierash2137 3 года назад

    happy new year 2021 Justin!! droppin' hot SONIC SCOOP knowledge as always son!! great level tips for prepping mix for master... -18LUFS seems to be my sweet spot for most mixes going to mastering but like you said, if you can SPANK your mix bus harder for tone and vibe, knock it out the box Luke!!!

  • @CJBeats
    @CJBeats 3 года назад +3

    👌🏻thank you

  • @blankblank4949
    @blankblank4949 3 года назад +1

    cool info, i totally agree even to a larger extent. If you want me to master stems than you want me to mix the song, theres no other reason to bounce stems unless you want to change their levels and tonality individually. make sure youre clear on whether you want your mix mastered or you want someone to mix and master what youve created.

  • @pegtownmanproductions9106
    @pegtownmanproductions9106 4 дня назад

    Great info thx. Just what I was looking for. I have a mix that I finished last night that will be mastered for vinyl. Late in the evening I added a limiter and now can’t decide if I prefer the limiter version or without. The limiter brought that glue that made it sound complete but without it there’s a bit more clarity and pop to the song. It’s punk so the glue suits but now I'm on the fence.

  • @surgerywithoutknives2353
    @surgerywithoutknives2353 3 года назад +1

    Insightful information without waffle ... cheers

  • @kumudtsering
    @kumudtsering 3 года назад +1

    Damn! That “No no no” text book killed me 😂😂😂

  • @zeswutz
    @zeswutz 3 года назад +1

    class channel

    • @SonicScoop
      @SonicScoop  3 года назад +1

      Thank you! Class comment :-)

  • @floydkellogg4689
    @floydkellogg4689 3 года назад +1

    Justin, what’s a good metering plug-in that you like? Love the videos and the course

    • @SonicScoop
      @SonicScoop  2 года назад

      Sorry I missed this! I like the SPL HawkEye, iZotope Insight and the ADPTR Audio Streamliner for different reasons.

  • @bradferguson9840
    @bradferguson9840 3 года назад

    Hey Justin, I'm a little late to the party here, but a quick question please...it's regarding your advice about supplying stems vs a full mix for mastering. I'm sure this is a difficult question, but if an artist had a 'good quality full mix' ready for mastering and 'equally good stems' for mastering, which would generally yield the best mastering result? Thanks!

  • @sanandsidthetwins7322
    @sanandsidthetwins7322 3 года назад

    That textbook one lollzzz, hahaha !!

  • @organicsoulsearch
    @organicsoulsearch 3 года назад

    Justin - Have you done a video on the online mastering platforms out there? How would I know, if I hired a "Pro Mastering Engineer", that they don't just put my file through some online service and call it good? Especially, when I would hope I would be paying for their "ears", experience, gear and expertise. Ever do a video on the (ethical) side of hiring someone to provide this (or any) audio service? I know a lot of people hiring people (like yourself) long distance (around the world) and have always been skeptical about whether people are getting their money's worth. Thank you!

  • @Kambiz.Mahdavi
    @Kambiz.Mahdavi 3 года назад

    I think that the proper gain staging is really magic, and this part of mixing and Mastering is not the same on the different genres, and Justin you know better that saturation is very important to have a punchy master and as a result, achieve your favourite loudness easily.
    I typically use saturations the first steps of my mastering chain, also I use tape machines for colouring before clipper and maximizer, the tapes also help me as well as saturation, and in my opinion and regarding to my experiences, tapes and saturations aren't at the same category for me,
    Saturation can reduces peaks to achieve more limiting, and tapes can do the same job as well but tape machines usually be used as colouring on my mastering chain,
    Ik multimedia T-racks5 Tape machine model 99 is really magic for mastering

    • @SonicScoop
      @SonicScoop  3 года назад

      Absolutely, I use some form of saturation in nearly every master I do. In analog mastering that can happen without a dedicated saturation box. But in digital mastering it's useful most of the time to have some kind of dedicated saturation tool fired up. Thanks for weighing in!
      -Justin

    • @Kambiz.Mahdavi
      @Kambiz.Mahdavi 3 года назад

      @@SonicScoop‌yes that's it, I mix in the box so your second advice is very pure and useful, tnx again

  • @SticksTheJon
    @SticksTheJon 3 месяца назад

    Justin, I have a question. Platforms like Spotify seem to suggest that they will noramlise track playback to -14dB LUFS so on that basis, what would be the point of mastering something beyond that level, only for Spotify to turn it down on playback? Doesn't that just mean that you're effectively limiting your peaks? As an example, you mentioned mastering up to a level of -5dB LUFS but at that point, you'd have to severely limit your peaks. Then Spotify will turn everything down by 9dB and your peaks could have been a lot bigger had you mastered at a lower level. Have I missed something? Thanks for a great video.

    • @SonicScoop
      @SonicScoop  3 месяца назад +1

      Here's the long answer:
      In Podcast form:
      ruclips.net/video/wtoB6oj_xRw/видео.html&pp=ygUganVzdGluIGNvbGxldHRpIGxvdWRuZXNzIHNwb3RpZnk%3D
      With Audio Examples:
      With Plugin Alliance:
      ruclips.net/video/85-GmZ9YF7k/видео.html
      With FabFilter
      ruclips.net/video/y4NlW5S8AsE/видео.html

  • @_MuscleRussell
    @_MuscleRussell 2 года назад

    What if I'm using Reaper and/ or they are using something else... what if they don't use the same plugins? example would be a particular violin.

  • @thedome765
    @thedome765 3 года назад +1

    You got a massive head my friend

    • @SonicScoop
      @SonicScoop  3 года назад +1

      You should see the rest of me! X-D

    • @thedome765
      @thedome765 3 года назад

      @@SonicScoop That one got me haha I too have a massive head!

  • @kofiassor2164
    @kofiassor2164 3 года назад

    wow, i believe i once heard a mastering engineer say there should at least headroom of -5? did i hear wrong? am now setting up my home studio

    • @SonicScoop
      @SonicScoop  3 года назад +1

      -5 would be very loud. That would be at the upper end of these ranges. So that’s a pretty accommodating mastering engineer-which is cool!
      Remember that in this case, the smaller the number, the louder the track. So -5 would be towards the loudest ends of things, and -22 would be a really quiet unmastered mix.
      Most finished masters depending on genre, might end up anywhere from a low of -14 to a high of -5 or so. There are some tracks that will want to go quieter or louder than that range though. I break it down by genre a little bit more in the video and in the video description.
      Hope that helps!
      -Justin

  • @taomestudio
    @taomestudio 3 года назад

    Hi Justin great content as always, where can I find your mastering services? I was in sonicscoop.com but I was not able to see prices for this services appreciate if you link your page for this job.

    • @SonicScoop
      @SonicScoop  3 года назад

      Hi, you can find me add joelambertmastering.com and justincolletti.com. Hope that helps! Let me know if there’s anything I can do for you :-)
      -Justin

  • @Stanacturproducer
    @Stanacturproducer 3 года назад

    Hahahhahaha I don't know why I love watching ur tutoring . Negetive I don't care lol

  • @RhymeTightAuthentic
    @RhymeTightAuthentic 3 года назад

    When I listen to pro tracks at -6 luffs and my tracks at -6 luffs mine never sound as loud

    • @jesse9999999
      @jesse9999999 3 года назад +2

      probably a recording and/or mix problem rather than a master problem

    • @asolitaryblueband
      @asolitaryblueband 3 года назад +3

      Maybe your mixes have more sub frequency content that you can't hear well in your listening environment

    • @kelainefes
      @kelainefes 3 года назад +1

      You could be ruining your transients by pushing them into the mastering chain too hard.
      Tame them in the mix and they will come out of the master chain cleaner and still punchy.

    • @SonicScoop
      @SonicScoop  3 года назад +4

      That’s definitely a thing! Not all tacks will sounds equally loud at the same nominal level.
      There are a variety of factors, but a big one is that all else being equal, brighter tracks will sound louder than darker tracks.
      It is common for home mixes and masters to have tons of extra sub that you might not be hearing and might not be doing you any good.
      Send some tracks some time if you ever need help on the mastering or mix coaching front!
      Very best,
      Justin

    • @RhymeTightAuthentic
      @RhymeTightAuthentic 3 года назад

      Thanks for the advice.
      I’ll have another go at eq my subs.
      I have tried this before but found my mix then sounded thin and not as subby as my reference tracks.
      Maybe I was to destructive with the eq.
      Thanks again

  • @rileyvickers3537
    @rileyvickers3537 3 года назад

    Always enjoy your videos and advice, except this doesn’t really apply to my mixes. Just Commenting to help the algorithm, cause I make Tearout dubstep and nothing technical matters in tearout except being loud and proud lmao 😂
    Damn I’m out here saying shit like “hmm -3 is too quiet” I honestly don’t understand what other dubstep dudes are doing getting so much perceivably louder then my masters, when club levels are around -3. Just thinking out loud in the form of a comment because I’m sure you and most people watching these videos think that’s stupid af.

    • @SonicScoop
      @SonicScoop  3 года назад +1

      There are definitely genres that go even louder than these recommendations yes. If it sounds right for what you were doing then do it!
      And you are right, the numbers on the meters don’t tell you everything you need to know about loudness. Two tracks that meter at the same level can have different degrees of perceived loudness.
      Overall frequency response and tonal balance has a big impact on this. But so does arrangement and other factors.
      Hope that helps!
      -Justin

    • @rileyvickers3537
      @rileyvickers3537 3 года назад

      @@SonicScoop definitely helps, you have great advice and knowledge, thank you!
      But on a personal side note, I’m the type of guy who much prefers set in stone numbers, and I’ve come to find that music is anything but set in stone, but it’s a good challenge and learning experience which I do enjoy.
      Cheers!

  • @Kambiz.Mahdavi
    @Kambiz.Mahdavi 3 года назад

    Hi Justin, your podcasts are always useful tnx , please check out my comment on your last post before this video, tnx alot man.

    • @Kambiz.Mahdavi
      @Kambiz.Mahdavi 3 года назад

      Your channel and produce like a pro and also Sage audio RUclips channels have been very very useful for me since 4 years ago, specially MixCon series made my own mixing and mastering style, I always appreciate you Justin.

    • @SonicScoop
      @SonicScoop  3 года назад

      Thanks! Just replied over there.

    • @Kambiz.Mahdavi
      @Kambiz.Mahdavi 3 года назад

      @@SonicScoop thank you sir, yes I checked out your comment and your kind words, and thanks again for your valuable time.
      I'm always grateful Justin