Ignition coil....primary circuit.... Between 1.2 and 1.5 ohm ..... Set multimeter on 200ohm Ignition Secondary test from pos and neg towards high tension spark point between 10.2 ---- 13.8 ohm ..... Pick up coil must be between 140 - 180 ohm Testing igniter unit use 1.5v AA or AAA battery..... Positive to red/pink wire and negative to white wire.......with car ignition on put multimeter red on negative of ignition coil and black multimeter on body of dizzy......reading should be between 1V and 1.5V ....... Please note DONT HOLD FOR MORE THAN 5 SECONDS OTHERWISE WILL DAMAGE RESISTOR
Ignition coil....primary circuit.... Between 1.2 and 1.5 ohm ..... Set multimeter on 200ohm
Ignition Secondary test from pos and neg towards high tension spark point between 10.2 ---- 13.8 ohm .....
Pick up coil must be between 140 - 180 ohm
Testing igniter unit use 1.5v AA or AAA battery..... Positive to red/pink wire and negative to white wire.......with car ignition on put multimeter red on negative of ignition coil and black multimeter on body of dizzy......reading should be between 1V and 1.5V ....... Please note DONT HOLD FOR MORE THAN 5 SECONDS OTHERWISE WILL DAMAGE RESISTOR