Everything is closed in my city because of the pandemic and I stepped on mine without noticing about an hour ago, and couldn't fix the temple until now. Thank you so much
IT WORKS🤩 I THOUHT IM GONNA LOSE MY ANTI-RAD GLASSES FOR MY ONLINE STUDYING BECAUSE THE HANDLE WAS BENT UNTIL I SEARCHED TO YT AND FOUND THIS VIDEO. THANKYOU!!🤩
You’d likely need to adjust the curve on the horn behind the ears. I’d have an optician do this, and I’d first ask if they know how to adjust horn. It requires lots of heat to soften the glue between the horn layers, and lots of patience to heat, bend, cool, reheat, a little bit at a time.
I have to search for this, learned my lesson from my previous glasses rip.. dont use ur hand for the sides use plyers and if its plastic frame heat it with hair dryers then bend it
My end pieces went super loose and I tried to tighten it up with a plier but it won't budge. I don't have a screwdriver that fits with me and I'm in a lockdown. Ughh
Depends how much work the repair takes, but here in the United States, most opticians do basic repairs for free, encouraging you to bring your prescription to them next time you need glasses. If there’s welding or anything more complicated required, there’s typically a charge, usually below 100 USD.
I don’t recommend this, but you can bend a temple piece inward by gently pushing that side’s hinge (the corner piece) against a table’s edge. Best of luck!
First look closely for any cracks that might cause it to break if you bend. Also check the metal for any deterioration which can also cause it to break. If it’s too much, visit your local optician. Good luck!
after getting hit in the face with a basketball the left leg is sticking out too much. i mean i understand wire frames but i got plastic frames so now im scared of cracking the plastic
Plastic frames often need to be warmed before you can bend them, unless you’re only bending the metal hinge. You can do it carefully with a blow dryer, but I would recommend just taking it to your local optician as they have better experience, and the proper tools.
Is it possible to bend the bridge so that the glasses become more curved and therefore have a more wrap around look? If my glasses were a bit more curvy or pressed to the face I would not see so much of the frame so I wonder if there are any methods to attain this.
That would affect your vision negatively. Your prescription is written for lenses that are flat in front of your eyes at a certain distance. Always see an optician to make adjustments to your glasses!
Always have a backup pair! Even if it’s a very basic, low cost option with basic lenses, it’ll still be worth it in a situation like this. Thank you for your comment!
Lol he said you don’t want a client walking in with a bent glasses and walking out with a broken glasses. Rest assured I will be walking out with a new glasses or a check for a new one. Lok
Just fixed my glasses after almost sitting on them. Never had that issue but your a life saver.
Thank you for this comment! I’m so glad the video helped!
i deadass slept on my glasses lmao
same
same LMAO
I was playing my phone on my bed forgot to actually remove it from my bed
SAME BRO
same
Everything is closed in my city because of the pandemic and I stepped on mine without noticing about an hour ago, and couldn't fix the temple until now. Thank you so much
Really? Everything is opening up where I'm at
Thank you so much! My glasses are terrible rn they fall of my face when i walk, I really believe it will work!
You are a absolute legend my glasses are now straight again thank you so much
Thank you! I’m so glad this was helpful
Thank you for this . I was able to fix my glasses in no time.
So glad this was helpful. Thank you for your comment ✌️
Thanks man I finally figured it out
You need a proper sized Phillip’s head to tweak the screws on the ends of the glasses 10/10
IT WORKS🤩 I THOUHT IM GONNA LOSE MY ANTI-RAD GLASSES FOR MY ONLINE STUDYING BECAUSE THE HANDLE WAS BENT UNTIL I SEARCHED TO YT AND FOUND THIS VIDEO. THANKYOU!!🤩
Thank you for your comment!
I hope it works cause if it don’t I’m toasted
Same, at my basketball game I was hit and the girl bent mine
I hope you figured it out!
my younger bro accidentally hit my glasses and it literally bent out so much, i thought i was doomed for life...until i found this video
My cousin stepped on my new glasses, I got em 2 weeks ago 😭
That sucks, BattleClan... Maybe the place you got the glasses from offers a warranty... you should give them a call! Can’t hurt
DrNickDanger I really need you help I have metal arms on my glasses but the pliers just won’t twist it and it really bad I don’t wanna tell my dad
Ok but who tf ask
Music Cuh who asked for you to reply
@@musiccuh4462 it was ME
Thank you for the vid 👍
Thank you very much ,love from 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
So i guess we're all here with crooked or bent glasses
Can the straightening apply to the rimless Cartier too. Like the wood and Buffalo horn with the same outward temple problem?
Yes, basically the same concept
Can bending damage the matt finish on the temples of my metal frame?
Yes it can, depending on the quality of the finish, and how much you bend it
My father punched me and my glasses got deformed.
Thank you 😊
Lenyâ Hêmin are you ok?
Yeah I’m fine he apologized
Theres always some smartass desperate for likes that they type something as stupid as that
Google Google aka you
What the fuck.
How do you adjust rimless Cartier Buffalo horn frames they keep slipping down? Is the horn frame adjustable?
You’d likely need to adjust the curve on the horn behind the ears. I’d have an optician do this, and I’d first ask if they know how to adjust horn. It requires lots of heat to soften the glue between the horn layers, and lots of patience to heat, bend, cool, reheat, a little bit at a time.
I have to search for this, learned my lesson from my previous glasses rip.. dont use ur hand for the sides use plyers and if its plastic frame heat it with hair dryers then bend it
You make good points there! Thanks for your input!
Accidentally sat on my new glasses😭😭
1:18 ❤
Imagine watching this without having glasses ...meh can't relate
My end pieces went super loose and I tried to tighten it up with a plier but it won't budge. I don't have a screwdriver that fits with me and I'm in a lockdown. Ughh
I don’t recommend this, but a knife’s edge can work in place of a flathead screwdriver in a pinch. Good luck!
How much will it cost if you want to repair it in the store?
Depends how much work the repair takes, but here in the United States, most opticians do basic repairs for free, encouraging you to bring your prescription to them next time you need glasses. If there’s welding or anything more complicated required, there’s typically a charge, usually below 100 USD.
oh my god thank u so much i just bent my new glasses by accident i couldnt tell my mom or else she’ll kill me
can i fix em' without the tool u
used?
I don’t recommend this, but you can bend a temple piece inward by gently pushing that side’s hinge (the corner piece) against a table’s edge. Best of luck!
Brother birthday is coming up but nothing worked
My glasses are really thin metal, am afraid to break it easily if I did that….
First look closely for any cracks that might cause it to break if you bend. Also check the metal for any deterioration which can also cause it to break. If it’s too much, visit your local optician. Good luck!
How do i fix them if i dont have my glasses on shit
That’s a deep question there! Always have a backup pair. Even if it’s a very cheap pair with basic lenses, it will come in handy some day!
I’m scared to do this because the lenses are in a half frame and I am worried about popping them out.
If you use two pliers, you can avoid putting pressure on the lens
I used a pair of tweezers. Not using their pointy tips. Instead, I put the hinge between the tweezers and bend it slowly.
after getting hit in the face with a basketball the left leg is sticking out too much. i mean i understand wire frames but i got plastic frames so now im scared of cracking the plastic
Plastic frames often need to be warmed before you can bend them, unless you’re only bending the metal hinge. You can do it carefully with a blow dryer, but I would recommend just taking it to your local optician as they have better experience, and the proper tools.
Is it possible to bend the bridge so that the glasses become more curved and therefore have a more wrap around look?
If my glasses were a bit more curvy or pressed to the face I would not see so much of the frame so I wonder if there are any methods to attain this.
That would affect your vision negatively. Your prescription is written for lenses that are flat in front of your eyes at a certain distance. Always see an optician to make adjustments to your glasses!
My one is pretty hard like it bended downward so I cant
If the bend is too severe, it might break when bending back. But it might also be ok. Bend it very slowly, and good luck!
I just fixed it with my hands i taught i was gonna snap it but i didnt
Well done!
anyone else just sat on there glasses and crying because they don't want to tell there parents..? No??
you just give an idea
What's that's tool called?
Optical pliers
i accidentally stepped my glasses. my mum is gonna kill meeeee. she just bought it 3 months ago
I got mine two years ago and just accidentally stepped on them lmao I'm so scared of getting in trouble
I’m sure if you’re honest with her you’ll be fine! I hope it worked out well at the end! Thanks for watching
Thanks man i just got my glasses a week ago and my brother kicked me in the face and now they are bent
Always have a backup pair! Even if it’s a very basic, low cost option with basic lenses, it’ll still be worth it in a situation like this. Thank you for your comment!
You know so como Play Store porción notion hacer eso 7 años y mi mamá y me paro Star durmiendo estoy noche y yo no sé cómo hacer eso
Lol he said you don’t want a client walking in with a bent glasses and walking out with a broken glasses. Rest assured I will be walking out with a new glasses or a check for a new one. Lok
I just sat in my glasses lol and it got way worse😭
Must not have known how to tell real from fake. Those were definitely real.
I put fire on it. It worked lol
I highly doubt that
im doomeed. i felt terrible right now cause I sit my glasess accidentally