iPhone 6 Baseband Repair No Service/Searching With Jumpers
HTML-код
- Опубликовано: 24 янв 2018
- Click to open video description to see links to our website and Facebook page where we regularly post content.
If You want to support me and see more videos you can donate using paypal.me/iTechRepairsIreland
Get a Quote: www.itechrepairs.ie/Get-a-Quo...
Facebook: / itechrepairs.ie
Website: itechrepairs.ie
We also welcome Mail-In Repairs - Наука
Good Job iDol,, Keep Up The Good Work,, And Thanks To You..
As usual the work is excellent
vraiment c'est tres interessant pour les debutants ,merci infiniment à l'animateur
انگلیسی بلد نیستم ولی امتحان کردم جواب داد واقعا ممنون tanks 😘
Really neat trick, anchoring the jumper lead on the nearby ground point while working.
Great Video On iPhone Repair. It's nice to see a good POV to further my knowledge
Perfect job, just one question which red cable you use for the jumber, because some thin cable are difficult for solder thanks
Excelente trabajo, disculpa que malla usas, se ve muy firme
im just playing this video for the chill music, thanks!
Very good. Perfect job 👍👍👍
Very clean work, awesome!!
Perfect work 👍 thank you for upload this video ❤️
Aaath grddsw,za
that is so cool and very informative !!! i have an iphone 5c that is "searching" all the time unless i heat the back up with a hair dryer when it gets a firmware number and works but as soon as you turn it off then on no firm ware and back to searching, do i have to reball the baseband chip ?? many thanks again
good repair. Thank you !
Very good Job 👏🏼👏🏼👏🏼
Great job sir 👍
nice great jobe i will follow you for more videos. thanks for this use full video
good repair!
Exelente , he visto muchos videos y es el mejor
ola a quantos graus tem que ficar a estação?
Hello, what microscope do you use? I would like to have that image quality. thank you!
Thank you
Most exellent.job.
👏🏻 good job 👍🏻 but you can do the jumpers without taking the ic off
Tell me please
@@davidpringlepatrick4262 it is hard to explain here if you want you can call me I’ll give you mu number
Good job bro
Hi nice work!!
What microscope is using please?
See the presentation video. All links in the description.
Please, what did you use to clean that led off the ic platform..?
Hi bro, what kind of wire jumper you are used for? thank you
0.06mm www.ebay.co.uk/itm/111747153645?ul_noapp=true
Useful video sir...
i like you work
Wow 😳 Good job 👏
3:01 is why i get scared shitless when people try to remove solder with a heater instead of an soldering iron
Great & Exlent work Br
I am interested work plss help me
Nice work
very nice sir ji
Great work
Vary nice job
Good job sir,,,,exalant
Syed Basha njKkwkkiioo
very very very good thank you
thank you. Can you please tell me what the cover is on top of a8?? It didn't appear on the video.
Uv mask
THANKS BOOOOOS
perfect work
salam prof comment pouvons nous avoir les produit que vous utilisez pour travailler elle sont de tres bonne qualité
Hello, Thank you for the video! Please is there a solution if the baseband itself is dead ? Thank you
If the IC itself is dead unfortunately there is no solution.
sir app what's app number doge pls . repaly?
Hi! I did a mistake which I don't know if I can fix or if it can be fixed. I damaged the base band contacts while cleaning off the old solder. Is it possible to swap boards and move both the memory and base band to another logic board?
It depends what you mean by damaging. and also where. on the ic or on the board? If it's on the board it's pretty easy as you can make jumpers.
perfect job
This video is very detailed. If you need the repair tools in the video, please contact me.
Perfect work, thanks alot, pls try to translate to English
good job...thanks.
Just curious,how do you know if every ball is lined up???
After replacing a few ic's you get the feel. Also you try and apreciate how the IC was sitting before removing it. And finally if everything is lined up you shouldn't have any shorts and the repair should be successful.
its the same i.c repalce or new i.c.sir thanks for sharing.bravo
Emma Caballero same ic. Afaik you can’t replace them because you can’t program them.
What kind of wire is that and size... thanks
have you had to clean the resin in the baseband ic before taking it off ?
There is no resin on the iPhone 6 Baseband.
Can you please tell me what is that green liquid that you have applied for those two jumpers under the IC is that liquid is heat proof please replace I am also repair guy
Noor Electronics as it says in the video. It’s called uv mask.
GOOD JOB
Good videos
Gog and god and very godانت ممتاز واكثر من ممتاز
how much heat do you put to clean the pads with desolder ??
365 with 100 flow on Quick 861DA
Next time use heat shield or heat resistant tape to protect the rest of the board
no need
Do i really need to do the Uv ligt?
great bro
Sir apka microscopy kon sa hai
How did you understand that the reason is in these 2 jumpers? Good job!
Every iPhone so far has signature faults. This model has a fault on the simtray line-top and bottom-hence error 9 and baseband problems.
99%correct solution
Good job
Thanks pro
great sir
Hello guys ! do you know what king of microscope is used here ? I'am looking for a good binocular miscoscope for hardware rework. But all i find has a working distance like 8 or 10cm.... not great to work with the iron
www.amscope.com/7x-45x-trinocular-zoom-stereo-microscope-simul-focal-head.html with www.amscope.com/0-3x-c-mount-lens-adapter-for-video-camera-microscopes.html and with www.amscope.com/0-7x-barlow-lens-for-sm-stereo-microscopes-48mm.html ......if you want more working distance you need a barlow lens.
Wow nice work
Thanks
This is a good id 👍👍👍
Ayer destape un control de televisor smart tv , le solde una pista con el hilo de cobre de unos audifonos.
Belo serviço, parabéns!! 👏👏👏👏👏👏
Excelente ...
Whats the need to make these jumpers if there already are the pads under the baseband ?
Stefano Giordano because that's a known breaking point. Although the pads are atill there the connection is not perfect. Making those jumpers ensures a perfect connection.
What temp when cleaning pads? how come no pads get pulleD?
I'm afraid that it depends on a lot of factors i.e.: what soldering hot air station you use, what flux, what soldering iron etc. For the hot air station that we use it's 365 Celsius with 100 airflow.
Bigggggggggg thank,s sir .
what heat machine do you use and what temp?
Dario Soto quick 861da at 380 with 120 airflow
Ok.tnx
Can you tell me about bracken Baseband
Hey, what's the backsound music title. the music is good to hear
Good work
Thanks
Bravo precisissimo
Hı if we change baseband iphone 6 to iphone 6 can email change
Awesome.....😎
nice
Nice
You should used anti heat tape for secure another component its might be drop for to much heating. Protecting another component from heating is important
I appreciate your advice, but so far we didn't need to use heat tape and no parts got damaged in the process. The temperatures that we use are safe for the components we work on as well as surrounding.
Temp, air flow, direction, nozzle diameter. Typically, the concerns are simply accidentally reflowing a near by IC.
I am interested for training plz help me.
A que temp lo quitas amigo y a cuanto de aire ?’’
365 celsius with 100 airflow
Hi what is your microscope model
Link in the description of the presentation video
koi btay ga k 6 ka baseband apna hi use ho ga ya koi or bi lga sakty hy
Hi, what solder wick do you use? thanks
We use three types of wick depending on the application and they are all from MG Chemicals: #424-N5, #424 & #424-LF
Thank you so much. At 2:46 do you use 424-LF? Anyway I ask you because I'm use Chemtronics Rosin SD. And when I put hot air on the pads and clean it with braid, The braid tends to open and I can not do the operation well. Probably it's the unsuitable braid, what do you think?
Hope you understand. Sorry if my english isn't perfect.
NikyRipy yes. I use the LF there. If you don't have access to a good wick you can use a round tweezer and hold it very low. Hope this helps.
Ok thank I will try :) Anyway I will buy 424-LF asap
NikyRipy do you cut your solder wick in long pieces? if you don't want the braids to open up make sure youre using solder wick from the roll, uncut.
What is the name of this green product you used?
Mechanic UV Mask
marcio teccell colle epoxy ? Qui ce fixe avec de la lumière uv
hi what paste do you use?
toni ji store.rossmanngroup.com/index.php/amtech-nc-559-v2-30-cc-16160.html
Молодец👍👍👍все отлично и аккуратно
Сергей Slikmoto26 зачем он сделал эти перемычки ?
Егор Тюльберг в двух словах- слабое место 6ки и se т.к модемы одинаковы. Эти два контакта в обрыве, в самых тонких местах. С виду целы. Мастер их продублировал) думаю объяснил
base band ic me heat and air ?
Hello, if a home button on iphone 7plus is totally broken, can you use its Turtle iC and reball it on aftermarket 7+ home button(ebay )? is it going to work? if no, then why?
You can harvest the IC but it won't make any difference. I think It's to to with the fact that the phone needs to detect the fingerprint sensor (the original one). I might be wrong but so far the only ones that worked with a new IC are the ones where the fingerprint works but the actual home button function doesn't work.
not working
maho hakikikan what's not working?
iTechRepairs the guy who asked the Question with transfering the u10 ic to an aftermarket hombutton... to this question is my answer not working :) not to your videos .. but i can ask u now from where u get the nice red jumper wire :)))
maho hakikikan rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F111747153645
this is beautiful!
Hello, what liquid is this that you used at 11:23?
Mechanic UV Mask
Which best apply for jumper hold
Don't really understand what you are trying to say 😐