I thought I was looking at a real train at the end. Your talent is great! I will always remember your tips and tricks when I create my layout. I'm picking up all the lumber I need this Friday to build my base table. Your videos always kick me back into "build your layout and have fun with it" mode. Inspiration at its finest. Thank you.
Jimmy, you are such a character. You make me smile and you make me laugh, but above all you provide so much inspiration. I do love watching your videos but am terrified that when I come to doing scenarios I will forget some of your wonderful lessons. I like Luke Towan but you bring a refreshing simplicity to the task which is not so demanding but which produces amazing results.
For cheap and effective sculptor mould alternative, take about 10 sheets of soft toilet paper, put it in a nutri bullet, give it a whizz and you have excellent paper fluff. Put about an inch of plaster in a fruit jar, add the fluff to loosely fill the jar, put the lid on and shake vigoursly to coat the fluff in plaster. Add water and mix to whatever consistency you require. Works great and above all it is cheap and easily made.
60 years ago I handlaid my track and super elevated my curves. I used 24 inch radius but a slight problem ocasionally rises in that on of these curves is on a 3% grade and because the super elevation tends to move the cg of cunterflow hoppers to move slightly towards the centre of the curve and on a long train has the potential to cause the cars to pull inwards and fall off the track
Jimmy!! Amazing work AGAIN! I'm a huge fan of Luke Towan and he's got a trick for remembering where he drilled the holes for the trees. Create flagged toothpicks with numbers on them and a board for storing them upright with appropriate number placements on the board so you know what when where. Once you've got your trees where you want them to go (prior to scenery), swap a toothpick with a tree. Now you'll know exactly where the hole was drilled and because your tree went into the toothpick's spot on the board, you know exactly which tree goes where. Keep the videos coming!!
I'm new at this, and learning as I go, and I had no idea there was this thing called sea foam. I'm stoked. Thanks for the excellent video. I've learned how to make my hills and mts out of styrofoam, using a butcher knife and a heat gun to shape them. Then, coat with glue and sprinkle different types of sawdust on it. Works for me.
I really like that you did all of this without static grass. I keep trying to add static grass, but it always seems out of scale for N scale. Maybe I just need to stick with fine turf.
Nice job Jimmy and doing modules definitely gives you practice and they're actually neat to have I think. Let's other people see the steps to take etc in doing a model railroad layout. Thanks again for sharing your videos and look fwd to seeing the next one!
finishing a 4x8 for my nephew. down to the wire for christmas and you are too good I have to say. Learned a lot about what to do next time. It turned out great but now I want to get to this level, heh. May have caught the bug.
Should read centre flow in previous comment. The prototypical looking lean of the cars on super elevated is good but sometimes there are advantages in sacrificing a bit of looks for more reliable practically in trouble free operation
Very nice and simple I'm in HO. What would be T-Trak equivalent module size, I like the idea of module sections thinking of doing a shelf layout in module type
Module dimensions for all scales can be found on the NMRA site: www.nmra.org/sites/default/files/t-trak_documentation-september_19_2019_final.pdf (HO is on page 7.)
Question the type of glue used before laying the grass and ballast. Also the mixture that you applied to the grass and ballast so it could dry where can I get those from.
Your work never ceases to amaze me my friend. A quick question though, Was there some extra cleaning that you had to do to the rail heads due to the spraying of the Glue/water mix and alcohol? I would think that there would be a residue build up. Thank you for your help. Starting my layout and trying to be as informed as possible.
Another great video! Im wondering if the sculpt a mold can be used to make smaller rock/mountain cliff sides? I am just getting started with an N scale layout and I need a way to make the train dissapear for a minute. I did see one of your videos about that, however I am using the same size as a door and I don't think I want such high mountains. Any suggestions?
can scenery really be done wrong? the biggest point of scenery is, as long as you like it, then it is perfect. can always add or subtract from the scene.
Looks good. I sometimes add a small deer family in my forest scenes to add a little bit of life.
I thought I was looking at a real train at the end. Your talent is great! I will always remember your tips and tricks when I create my layout. I'm picking up all the lumber I need this Friday to build my base table. Your videos always kick me back into "build your layout and have fun with it" mode. Inspiration at its finest. Thank you.
Would it be possible to do a video about upgrading an old layouts scenery?
Jimmy, you are such a character. You make me smile and you make me laugh, but above all you provide so much inspiration. I do love watching your videos but am terrified that when I come to doing scenarios I will forget some of your wonderful lessons. I like Luke Towan but you bring a refreshing simplicity to the task which is not so demanding but which produces amazing results.
Thank you for the kind words!
Excellent how to video about scenery! Thank you
I just started a very large layout and I would like to thank you for all the information you give on these videos
For cheap and effective sculptor mould alternative, take about 10 sheets of soft toilet paper, put it in a nutri bullet, give it a whizz and you have excellent paper fluff. Put about an inch of plaster in a fruit jar, add the fluff to loosely fill the jar, put the lid on and shake vigoursly to coat the fluff in plaster. Add water and mix to whatever consistency you require. Works great and above all it is cheap and easily made.
60 years ago I handlaid my track and super elevated my curves. I used 24 inch radius but a slight problem ocasionally rises in that on of these curves is on a 3% grade and because the super elevation tends to move the cg of cunterflow hoppers to move slightly towards the centre of the curve and on a long train has the potential to cause the cars to pull inwards and fall off the track
Jimmy!! Amazing work AGAIN! I'm a huge fan of Luke Towan and he's got a trick for remembering where he drilled the holes for the trees. Create flagged toothpicks with numbers on them and a board for storing them upright with appropriate number placements on the board so you know what when where. Once you've got your trees where you want them to go (prior to scenery), swap a toothpick with a tree. Now you'll know exactly where the hole was drilled and because your tree went into the toothpick's spot on the board, you know exactly which tree goes where. Keep the videos coming!!
I'm new at this, and learning as I go, and I had no idea there was this thing called sea foam. I'm stoked. Thanks for the excellent video. I've learned how to make my hills and mts out of styrofoam, using a butcher knife and a heat gun to shape them. Then, coat with glue and sprinkle different types of sawdust on it. Works for me.
Looks great! I finally found my T-Trak modules that I bought years ago. I'll have to do some work on them here in the near future.
Excellent work. Thanks for sharing.
Another great tutorial. Easy to follow, easy to understand.
Excellent craftsmanship! Thank you!
Nice little tutorial Jimmy! Greetings from Melbourne Australia 🇦🇺
Great video, nice work again!
Thanks for the inspiration for doing scenery on my own 'Plywood Pacific Lines'!
I really like that you did all of this without static grass. I keep trying to add static grass, but it always seems out of scale for N scale. Maybe I just need to stick with fine turf.
As always another great video! You're a professional video person so bloopers should be rare!
Ten out of ten for effort, appearance and realism. Great video Jimmy!
Like always.... giving me inspiration on every video. Thanks, Jimmy!
Looks very good! You make it look really easy! Thank you!
Dude. You’re incredibly talented.
Great tips as always Jimmy. Thanks for sharing
Nice job Jimmy and doing modules definitely gives you practice and they're actually neat to have I think. Let's other people see the steps to take etc in doing a model railroad layout. Thanks again for sharing your videos and look fwd to seeing the next one!
thats great way to make thank you
finishing a 4x8 for my nephew. down to the wire for christmas and you are too good I have to say. Learned a lot about what to do next time. It turned out great but now I want to get to this level, heh. May have caught the bug.
Good video jimmy thanks lee
Should read centre flow in previous comment. The prototypical looking lean of the cars on super elevated is good but sometimes there are advantages in sacrificing a bit of looks for more reliable practically in trouble free operation
Turned out very nice, all of the trees you make here and on other videos are great! I'm always amazed...thanks.
Very nice and simple I'm in HO. What would be T-Trak equivalent module size, I like the idea of module sections thinking of doing a shelf layout in module type
Module dimensions for all scales can be found on the NMRA site: www.nmra.org/sites/default/files/t-trak_documentation-september_19_2019_final.pdf (HO is on page 7.)
Very nice jimmy
Great video! I'm curious as to why you didn't paint the rails?
Question the type of glue used before laying the grass and ballast. Also the mixture that you applied to the grass and ballast so it could dry where can I get those from.
Your work never ceases to amaze me my friend. A quick question though, Was there some extra cleaning that you had to do to the rail heads due to the spraying of the Glue/water mix and alcohol? I would think that there would be a residue build up. Thank you for your help. Starting my layout and trying to be as informed as possible.
Looking good Jimmy. You do great work. Was wondering where you find the super glue in that size bottles?
Another great video!
Im wondering if the sculpt a mold can be used to make smaller rock/mountain cliff sides? I am just getting started with an N scale layout and I need a way to make the train dissapear for a minute. I did see one of your videos about that, however I am using the same size as a door and I don't think I want such high mountains. Any suggestions?
Don't forget the feet. Module height should be adjustable from 2 3/4" to 4" so that they will line up with each other.
can scenery really be done wrong? the biggest point of scenery is, as long as you like it, then it is perfect.
can always add or subtract from the scene.
Love all your vids need to get rid of that plastic kato track you are too talented to use that track
How do you connect the T tracks rogether
T Trak modules are designed to click together using Kato’s unijoiners on their track.