Bro, a Naya unit Aya hai, with new buttons and led lights etc. Have these new units solved previous problems such as wobbling or engine issues or petrol indication etc?
So far the best review i have seen. Good work brother. I am confident between alloys wheels and spok wheel but it’s soo good that you spoke about it and shared your experience
@@harvey7162Same issue here. How did you remove it? Did you remove the plate or just cut out the part of the plastic that touches the mudguard? Did you shift the number plate upwards?
You seem like a novice rider so I'm gonna point it out. Don't keep your clutch in a semi pulled state while accelerating. You're gonna burn your plates. If it's a habit, it's a bad one. It was heartbreaking to watch. But other than that, not bad for a review. Good job. 👍
Thank you. Not a newbie but newbie with this bike actually. My hands are yet to get habitual with the whole system of it. Though thank you for your words will improve and take care of it brother. Means a lot❤️. And one more thing about this gt, we have option to adjust the lever of clutch and hand brake so I have adjusted and shortened the gap of handle bar and clutch (just FYI).
It seems your worried about punctures, alloys wheels "plug and go" and spoke wheels "tyre off and patch put on OH what a head ache" ... There are tyre companies that can make spoke wheels into a sealed wheel for tubeless tyres, there many in India please look into it.. and report back.
@@rovingwhizz Reason is All café racers had spoke wheels, well really thinking, alloys were not invented for motor bikes then. lol. So modern take on original café racer you really want to have spoke wheels to keep in the tradition of old bikes.
@AmanSingh-ud4tm well it's never a wastage, it all depends upon your choice, gt is still the best and most affordable bike in its segment and has a good engine and Performance
Haha don't worry I'm not using the clutch, it's just that I have adjusted the clutch so it seems that I'm using half clutch but it's not being used actually.
First view first like
Thank you brother
use 3M adhesive to make it tubeless with spoke
Oh ok
Clean explanation and loved the way you gave non filtered advice and honest opinions. Keep going ❤
Thank you so much. Keep supporting ❤️
2023 model has no wobbling issue i believe isn't it ?
Yes that's true
Bro you are just better than any other moto vloggers
Aree haha, thank you brother but there are people better than me.
@@rovingwhizz but they can't explain clearly like you brother,i hope you reach 50k subscriber soon
Thank you brother means a lot to me 🥺
Cool bike Jaiswal Sahab 😮
Thank you
Bro, a Naya unit Aya hai, with new buttons and led lights etc.
Have these new units solved previous problems such as wobbling or engine issues or petrol indication etc?
Wobbling is still there but not as much as it used to be in the old one, and petrol indicator is still the same 🤣🥲
Is clutch lighter side or its a heavy clutch?
Heavy clutch
Big fan bhai this is my dream crome ❤👍
Thank you bro. ❤️
Bhai Company wale Alloys alg se purchase ka option de rhe kya?
Ha bro option hai tum le sakte ho alag se
So far the best review i have seen. Good work brother. I am confident between alloys wheels and spok wheel but it’s soo good that you spoke about it and shared your experience
Thank you so much brother, means a lot to me.
G T lene ka sapna sapna hi reh gaya 🥲🥲
I feel you bro
Don’t worry you’ll get it one day. Just believe in yourself and work hard.
Front Number plate cover should be removed,it will put scratches on mudguards on a bad road!
Personal experience 😅
Yes bro I already have got scratches 🤣
@@rovingwhizz screates on new ride be like scratches on our body
Pain is same 😂
Ahhh bro I feel yaa 🥺
@@harvey7162Same issue here. How did you remove it? Did you remove the plate or just cut out the part of the plastic that touches the mudguard? Did you shift the number plate upwards?
I have shifted the number plate upwards a bit.
Bro can we put tubeless tyres for this Mr clean variant
Yes you can put tubeless with alloy on this also.
Can we put tubeless with spoke rims
There are different type of rim for that, and I don't know if it's available for gt 650 or not.
You seem like a novice rider so I'm gonna point it out. Don't keep your clutch in a semi pulled state while accelerating. You're gonna burn your plates. If it's a habit, it's a bad one. It was heartbreaking to watch. But other than that, not bad for a review. Good job. 👍
Thank you. Not a newbie but newbie with this bike actually. My hands are yet to get habitual with the whole system of it. Though thank you for your words will improve and take care of it brother. Means a lot❤️. And one more thing about this gt, we have option to adjust the lever of clutch and hand brake so I have adjusted and shortened the gap of handle bar and clutch (just FYI).
It seems your worried about punctures, alloys wheels "plug and go" and spoke wheels "tyre off and patch put on OH what a head ache" ... There are tyre companies that can make spoke wheels into a sealed wheel for tubeless tyres, there many in India please look into it.. and report back.
Oh yes I have heard about I'll check
@@rovingwhizz Reason is All café racers had spoke wheels, well really thinking, alloys were not invented for motor bikes then. lol. So modern take on original café racer you really want to have spoke wheels to keep in the tradition of old bikes.
True ayee🔥
I am planning to buy it from sector 63 noida. What do you suggest should i buy it. Kya isme missing problem bhi hai
Well problem to hai hi jaldi ownership review banata hu.
@@rovingwhizz yes please, kyuki finance me bike 5 lakh ki pad rhi hai, is it sensible to invest 5 lakh in this bike
@AmanSingh-ud4tm well it's never a wastage, it all depends upon your choice, gt is still the best and most affordable bike in its segment and has a good engine and Performance
Watching riding with half clutch hurts
Haha don't worry I'm not using the clutch, it's just that I have adjusted the clutch so it seems that I'm using half clutch but it's not being used actually.
milage bta dho plz
Bro mileage chalane ke upar depend karta hai, 25 tak de dega aaram se.
Bro tubeless h ya tube h ?
Bro tubeless Tyres hai but with tube bcoz it has rims not alloys
Smja ni 😂😂 agr puncture hoga tho ? Knsa procedure lgega ?? Pura kholna pdega yaa jese tubeless me hota h procedure vo?
Pura kholna padega, bas Kahne ko tubeless hai 🤣🤣
Can you put a phone holder on your new gt 650??? In handle bar, can you try and make video?
Sure brother I'll make a video about it soon.
@@rovingwhizz yes boss
@@rovingwhizz hello I'm wating for you with the phone holder.😊
Oh soon brother. Just busy in other things.
Take your time brother 🙏
Bhai minimum down payment kitna hai?
Bhai up to 90% tak loan ho jata hai depending upon your cibil and all.
Allow Wheels Tubeless hh kya .....
Ha bro.
Experience False neutrals?
No brother
Are you planning to install a RRP slip on?
No plan as such for right now, will wait for sometime.
Iska break lever 6900 k h single mera dusre he din tut gaya araam se chalna bhai 😅
Oh, thank you for the advice bhai. Dhyan rakhunga.
Nope. Alloys se charm khatam nahi hota.
Personal choice bro ❤️
Ya to sudh Hindi bol ya to sudh english
Bhai ab aadat hai kya karu