I helped my friend when he modded two of his PS4 controllers and I've gotta say now that I'm looking into my Xbox controller seeing how much more involved/difficult these are to mod is both intimidating and exciting
Easy .... Looks awesome. only complaint is there is no way to control brightness. Bonus though is it remembers the lights you set when you turn it off.
Am I the only person who noticed the eyes on their left index like a hand puppet? Either that or the best ever random spots for freckles I've ever seen. Nice job by the way haha cheers!
If you're here from the Amazon page like me, Pro tip; make sure the buttons "drop" out, when you are holding the controller. If your buttons don't drop when you are mounting the secondary circuit board (the one stuck to the plastic frame) back in, you will have to dismantle the whole controller, and start again. I supposed to say, make sure everything is alligned, before you put the screw even in the first controller, because these buttons WILL sneak up on you. Also the double sided tape is extremely weak, and will give out. So your timing is very limited when doing this.
No what i wanted to say here is that he can mod his controller if he want i have an xbox and i'm gonna do it soon when thé symbols version come out. I wanted to à custom for my switch for more than a year and i did a full shell swap and led
Is there a way (or somewhere) for me to add/solder more LED lights to this and have them turn on when the kit turns on? I wanted to add a small string of fairy lights to the back of a controller with a clear shell.
I'm a little confused about the bdp an csp ,bdp means when the controller batteries are in it'll stay on? Or only when you turn the controller on? An csp only turns on with the synced button?
Bpd is on as long as there are batteries in the controller and the lights are turned on (menu and select buttons held for 3 secs turns the lights on or off) i think with the csp option the lights come on when you turn on the controller (they are "synced" with the controller). The sync button doesnt do anything special. I did bpd but in the future i think i would do csp because it can be a pain turning them on or off.
Looks amazin but i play a lot of gta an enterin color change mode is the same as the interactive menu. Is there any way to stop the colour change mode being used?
Thank you for the instruction video but why not use a exacto-knife / something similar to take off the battery pack sticker instead of pushing the screw driver through it? Also you need to rearrange the order in which its built. To make things easier, for example, bumper lights should go on before buttons.
We've got reported some series X controller battery plate was soldered with the mainboard. So in this case, you have to use the CSP method, which means you have to do the soldering (not difficult)
If you're saying you don't want to DIY, then you will need (1) a suitable Xbox controller (2) the version of this kit which goes with that controller (3) someone competent to install the kit into your controller. Maybe ask the person in (3) before getting the controller and LED kit.
soldering I'm OK I'm good I was thinking about doing this to my Xbox one x controller since I saw that I'm good I don't want it nor need it I deal with the buttons n i think you should do up close with little parts ima stay away from this mod only way i do this if i get a spare controller n the prices for console controller its not cheap i did one on my ps4 n it started to get hot i followed the videos n boom one broke my controller n the other almost blew up on my face
i wasted 4 hours trying to put this on my controller only to get frustrated and not even use the LED and i broke my controller in the process. not worth it
@@ExtremeRate nothing sticks the way it does in the video and the battery connection piece is too shorty. I voided my controller warranty because I was under the impression that I wouldn't have to struggle to build this and I'm not satisfied with what im getting. I'm really trying not to return the merchandise but yalls facebook is deactivated and I don't have time to sit on youtube all day to figure this out. So what can I do to get some better assistance? Or should i just return the product?
@@Xenatsku Sorry to know that. The installation of this product is not easy just like all the other DIY projects. Where have you bought this kit? Amazon?
I helped my friend when he modded two of his PS4 controllers and I've gotta say now that I'm looking into my Xbox controller seeing how much more involved/difficult these are to mod is both intimidating and exciting
For those asking for a way to adjust the the brightness you can solder in a small rheostat between the battery supply and the power for the board.
Easy .... Looks awesome. only complaint is there is no way to control brightness. Bonus though is it remembers the lights you set when you turn it off.
Am I the only person who noticed the eyes on their left index like a hand puppet? Either that or the best ever random spots for freckles I've ever seen. Nice job by the way haha cheers!
You have such skills that are worth a million and talent.
Lol
Thank you modded to controller with this kit 👍👍👍😊
If you're here from the Amazon page like me, Pro tip; make sure the buttons "drop" out, when you are holding the controller. If your buttons don't drop when you are mounting the secondary circuit board (the one stuck to the plastic frame) back in, you will have to dismantle the whole controller, and start again.
I supposed to say, make sure everything is alligned, before you put the screw even in the first controller, because these buttons WILL sneak up on you. Also the double sided tape is extremely weak, and will give out. So your timing is very limited when doing this.
Really good quality LED’s! They’re bright, and worth the money. A little difficult to install, but really cool! Thanks!
do you have to use the machine he uses in the video?
@@djtanikgotbeatz yes. It is the same controller, the xbox one s 1708 model. It is the same light kit and controller.
You guys are the future of gaming I really love this company 🥰
Thank you so much bro! :D
@ExtremeRate, how do you soldering the controller. I'm watching a video right now and I can't see it very close because I'm doing my controller now.
It looks cool, but you may as well replace the analog sticks with hall effect ones too, taking this apart is going to be a nightmare.
Thank you guys for the very helpful i will give a 5 star rating on amazon about this product.
It's so beautiful
Thank you!
Wii you guys make a kit to allow different color zones on the PS5 controller
Can I combine this mod with the remap one ???
Do I have to do the soldering part for it to be able to work?
No
Do both installation methods work when using a cable instead of batteries?
Is there another place I can solder the csp wires to have the leds dim with the xbox logo on the controller
Thanks a lot
I think i have the answer but is it compatible with the elite controller ?
Is there a way to have it react to music or action in a game?
That would be pretty cool 😃👍🏽
No :(
Is there a fade option for all colors?
Will there be a ps5 version that might come out soon similar to this? Like to where each buttons have their own color option settings?
Hey! Just completed this mod, is there a brightness setting?
dose it work on xbox eite 2
Most of my time I look at the controllers you mod knowing I'll never get a modded controller
I said the same and now my switch is moded shell swap and led even my pro controller is modded (soon but wathever)
lol because you have the Xbox, most of the mods for Xbox controller are difficult when compare to PS or Switch
@@konahrikkrilot8116 lol
No what i wanted to say here is that he can mod his controller if he want i have an xbox and i'm gonna do it soon when thé symbols version come out. I wanted to à custom for my switch for more than a year and i did a full shell swap and led
@@konahrikkrilot8116 I got you ;)
Do u really need the black wires bec I don’t have the thing to add the wire 😢
Quando uscirà per il joystick della ps5 BDM030 con il kit led?
If you use the battery only one will the controller still work and the lights not?
So now my "select" button doesn't work. It works to control the functions of the led lights, but doesn't work with my console. Any suggestions?
Tear it apart and make sure the button is making good connection with pad when it is pressed. Its possible something slid in between them.
Hey is there going to be back buttons for xbox series x/s controllers? Should I be waiting?
Yes! Within 2 weeks!
Is there a way (or somewhere) for me to add/solder more LED lights to this and have them turn on when the kit turns on? I wanted to add a small string of fairy lights to the back of a controller with a clear shell.
If you use the CSP method, you can solder the extra LEDs to BAT+ and BAT-
@@ExtremeRate what is the csp method
@@trejohnson1141 the method in the video install titled "CSP" (the soldered one)
The controller that came with the system dose not fit on the top where the button is off the sticker is on top of it it’s uneven what do i do
Il video è in bassa risoluzione come mai ? Per il kit complimenti come sempre ! ;)
RUclips stava elaborando la versione 1080P e ora è disponibile! Grazie Fratello!
@@ExtremeRate A voi ;)
@@MegatickerRUclips :D
The change color settings aren’t working. Any advice? I did not solder. Thanks in advance
Followed everything my controller works but no lights
Same bro I need help
I have the same controller (one s) but my motherboard is others than yours. Why? And where can I put the minus cable? C24 or c34?
Will this kit work on the 1537 model Xbox controller?
Can i use this mod with the Victor s mod?
ExtremeRate . . i did everything right , but it did not work.
Hello I installed these,they turn on but I can't turn on my controller.I was wondering if u could help me out.what should I try to fix it.
my only problem is the adhesive is not great at all
Honestly this stopped sticking half way through and came broken. Very disappointed with this since all your reviews are good.
same, adhesive sucks on it
Just use some glue but I agree every else good
I want this but in the old one with just the symbols for the buttons for xbox series x now
We are making the symbolic buttons version, please stay tuned.
I'm a little confused about the bdp an csp ,bdp means when the controller batteries are in it'll stay on? Or only when you turn the controller on?
An csp only turns on with the synced button?
Bpd is on as long as there are batteries in the controller and the lights are turned on (menu and select buttons held for 3 secs turns the lights on or off) i think with the csp option the lights come on when you turn on the controller (they are "synced" with the controller). The sync button doesnt do anything special.
I did bpd but in the future i think i would do csp because it can be a pain turning them on or off.
@@brandonrodgers2479 thank you
Looks amazin but i play a lot of gta an enterin color change mode is the same as the interactive menu. Is there any way to stop the colour change mode being used?
Not permanently but temporarily
Thank you for the instruction video but why not use a exacto-knife / something similar to take off the battery pack sticker instead of pushing the screw driver through it?
Also you need to rearrange the order in which its built. To make things easier, for example, bumper lights should go on before buttons.
Nach kurzem Funktionstest, Farbauswahl sowie speichern der Farbeeinstellung und anschließenden ersten Zocken, ist der Controller leider defekt.
I want to get one of these but my dad won't let me
How close are to Xbox series x controller back buttons
Within 2 weeks!
Part of the BDP wast attached to the main part of the yellow stuff and I can't connect it, also it won't stick to anything?
We've got reported some series X controller battery plate was soldered with the mainboard. So in this case, you have to use the CSP method, which means you have to do the soldering (not difficult)
@@ExtremeRate so if i dont solder then it wont be wireless
@@lostlover69420 If you don't solder, you can't use the USB power to turn on the lights
Nice
Thanks!
Where can I buy the full controller of these. I don’t want just the motherboard 🥺
If you're saying you don't want to DIY, then you will need (1) a suitable Xbox controller (2) the version of this kit which goes with that controller (3) someone competent to install the kit into your controller. Maybe ask the person in (3) before getting the controller and LED kit.
Do you have this for ps5 controller I have the one with all bottons not triggers like R1 R2 L1 L2
We are working on the solution for the PS5 controller, but it takes time!
soldering I'm OK I'm good I was thinking about doing this to my Xbox one x controller since I saw that I'm good I don't want it nor need it I deal with the buttons n i think you should do up close with little parts ima stay away from this mod only way i do this if i get a spare controller n the prices for console controller its not cheap i did one on my ps4 n it started to get hot i followed the videos n boom one broke my controller n the other almost blew up on my face
Will this work with the Original Xbox One? The Non-Bluetooth version?
No...
There is a different kit designed for that model specifically.
Does it work for the series x controller?
No, we are working on the Series X version, please stay tuned
My controller is broken now 😢
i wasted 4 hours trying to put this on my controller only to get frustrated and not even use the LED and i broke my controller in the process. not worth it
This was so hard and annoying to do. I did it and it didn't work
this kit wasnt designed very well. my controller and led kit are now junk. this needs some work
Is it still compatible with the lofty kit ?
I think but i want to ask to make sure
Yes!
@@konahrikkrilot8116 Yes!
@@ExtremeRate this is an other subject.
Can we have for the switch has an exemple à clicky led trigger ?
@@konahrikkrilot8116 Do you mean the Switch Pro controller Clicky LED triggers?
So what method doesn't require soldering? That's the main reason i bought this and this video makes literally no sense
Please check the instruction at 06:27. If you don't want to solder, skip all the CSP parts of the video.
@@ExtremeRate nothing sticks the way it does in the video and the battery connection piece is too shorty. I voided my controller warranty because I was under the impression that I wouldn't have to struggle to build this and I'm not satisfied with what im getting. I'm really trying not to return the merchandise but yalls facebook is deactivated and I don't have time to sit on youtube all day to figure this out. So what can I do to get some better assistance? Or should i just return the product?
@@Xenatsku Sorry to know that. The installation of this product is not easy just like all the other DIY projects. Where have you bought this kit? Amazon?
So you need a sawder Izer machine for this???? smh
Can't you just sell controllers that are already modded?
Not for the LED kit at the moment
@@ExtremeRate is it possible to use this led kit on the Xbox elite v2 controller?
@@Brandon_519 No...
Beim löten zu weit weg gefilmt
Broke my controller
.my mind is melted
:D
How do u do stuff that is that complicated 🤯
@@mr.charchar Passion!
I ordered it and did it……
All by myself
Do not do
No fucking way XD is better then ps5 🤣
:)
Worst video no talking and way to fast.
Does it work on Xbox one controllers instead of X1S controller
Does this work on the xbox elite controller?