I try Lora module but no Idea for communication with network so please help me and if you have same document Sher with me if you have not problem please help me
hello, Iam testing lora communication by using RN2483 PICTAIL LoRa module, i bought two of those lora modules can they communicate directly without any gateway in between? please reply ASAP , thankyou in advance
can we make communication between two Arduino combined with LORA SX1278, like sending moisture value from one Arduino with Lora sx1278 to another Arduino with Lora sx1278 to start the pump? (without connecting to any internet )
Hello im little bit newby, i would like to know why we can't plug the sensors directly to the Lora module. does the arduino need to convert something, or some command we need to do to wake up the module? can we imagine an iot lora module without arduino prog ? best regards my friend! :)
hi , this is alhad . I am getting compilation error in the sample temperature code . I tried using the v1.6.6. of IDE but still m getting the error . please help me
Hey Congduc, I'm currently trying to use the same setup as you do. I got the same arduino and programmer, they are broadcasting signals (to my own LoRa Gateway), but how do you set up the ThingSpeak network to receive the messages? Did you use some tutorial you could link or do you have the MATLAB code for me? Greetings.
No, I havent gotten any response yet. And I'm working on this setup for my internship. I have a lot more stuff to do aswell, so this is a bit less important right now,
Hey congduc, I want to implement LORAWAN full TX and Rx using sx1272. i am totally confuse how i can implement this. i can able to send it to cloud but i want rx to end node side
sx1272 can only be used in a single channel lora Gateway, the lorawan gateways need multiple channels and connexions on multiple frequencies, this cannot be provided by the sc1272, check out the sx1303 for lorawan gateways.
LoRa Works with 2 compartments, the LoRa part where the data is being send from and the Gateway, which recieves the data. If you are new with Arduino, it might not be smart to jump right into LoRa. If you want to start using LoRa anyway, there are much better ways to find information about ten asking it on a yt video which showcases a build for LoRa.
Good video but too long. You could have done this in less than 5 mins. There was no need to show how to solder, how to connect wires etc and that too in real time. Just a circuit diagram would do.
You speak. three languages too! You are a talented man. Thank you for this video.
Thank you very much. This was great video and exactly what I needed as I have very little experience doing this. Step by step.... Awesome!
Great stuff thank you, this is helping me get started with the low-cost radio
Super tutorat! Merci.
Un super projet pour mes élèves en perspective!
suceur😳😳😳🥶
amazing tutorials
I enjoyed the music. great video.
wtf?
Hello, very interesting. Questions are, how long does the Battery last, and if there any alternative to the Modtronix chip, meaning cheaper? Thanks!!!
I try Lora module but no Idea for communication with network so please help me and if you have same document Sher with me if you have not problem please help me
Too bad this video has no audio. We really do not need to see someone soldering pins. Maybe this video could be redone?
Hi,
I would like to know how to trigger the TX manually by button or a door switch,
Can you help me?
hello, Iam testing lora communication by using RN2483 PICTAIL LoRa module, i bought two of those lora modules can they communicate directly without any gateway in between? please reply ASAP , thankyou in advance
can we make communication between two Arduino combined with LORA SX1278, like sending moisture value from one Arduino with Lora sx1278 to another Arduino with Lora sx1278 to start the pump? (without connecting to any internet )
Hello im little bit newby, i would like to know why we can't plug the sensors directly to the Lora module. does the arduino need to convert something, or some command we need to do to wake up the module?
can we imagine an iot lora module without arduino prog ?
best regards my friend! :)
how long can sensor battery last if its powered on all the time?
hi , this is alhad . I am getting compilation error in the sample temperature code . I tried using the v1.6.6. of IDE but still m getting the error . please help me
Hey Congduc,
I'm currently trying to use the same setup as you do.
I got the same arduino and programmer, they are broadcasting signals (to my own LoRa Gateway), but how do you set up the ThingSpeak network to receive the messages? Did you use some tutorial you could link or do you have the MATLAB code for me?
Greetings.
Hi Mathieu,
Any news on the codes or links ?
No, I havent gotten any response yet. And I'm working on this setup for my internship. I have a lot more stuff to do aswell, so this is a bit less important right now,
Hey congduc,
I want to implement LORAWAN full TX and Rx using sx1272. i am totally confuse how i can implement this. i can able to send it to cloud but i want rx to end node side
Hi , i dont think that sx1272 can be used to create full Lorawan network, it is used to create a single channel Gateway, like that of Dragino.
But in datasheet of sx1272 it is mention that we can send and receive both then why its not possible tyo use sx1272 for full stack lorawan???
sx1272 can only be used in a single channel lora Gateway, the lorawan gateways need multiple channels and connexions on multiple frequencies, this cannot be provided by the sc1272, check out the sx1303 for lorawan gateways.
Hello,I'm new in Arduino,What is LORA gateway, How do I use it, I'm working in windows environment, Thank you
LoRa Works with 2 compartments, the LoRa part where the data is being send from and the Gateway, which recieves the data.
If you are new with Arduino, it might not be smart to jump right into LoRa.
If you want to start using LoRa anyway, there are much better ways to find information about ten asking it on a yt video which showcases a build for LoRa.
Good video but too long. You could have done this in less than 5 mins. There was no need to show how to solder, how to connect wires etc and that too in real time. Just a circuit diagram would do.
hay rồi đây :)
no fucking sound wtf
Tutorial without sound? Better make a web page; this video is not usefull as an instruction "manual"
talk. voice. no text. just words. sad.