New subscriber here. Can you please list down all the items that you used to make this. Aside from strip lights Example, what kind of glue? Etc. Appreciate the kind answer.. 😊
Thanks for watching. It should be in every end of the neon flex to make a series wire connection at the back, but i only drill a hole in one end of each piece of neon flex because i connected every piece of it directly to the wire with the main power supply.
I test it by simply connecting every piece of neon flex with soldered positive & negative wires directly to the positive & negative wires of the power supply.
For a 12 volts neon flex, the shortest cut you can apply is 25mm and there is a visible line on the side of neon flex that has copper for soldering which is your guide for cutting.
For two words design with 1 square foot of acrylic plastic, the usable size of neon flex is 2 to 3 meters. The cost depends on your country how much the price of each product.
Transparent wire connectors for led neon strip flex, it is similar to the wires used in audio or speaker transparent cables but smaller size. Can be purchased at electronic stores.
sir bakit ung mga wire likod pinagsama sama mo lang po? wala po ba syang positive and negative? at ilang powersupply po ginamit nyo kasi po tatlong set po ung pinaghiwalay nyo po sa likod ih.. salamat po..
Parehong negative at parehong postive ang pinagsama-sama ko, di ko lang masyado na focus yung wiring sa video pero nka bukod lahat ng negative at lahat ng postive na may dalwang linyang mgkahiwalay ang pinagdudugtong ko sa isang power supply lang na 2 Ampere.
Once na mabili mo na lahat ng materials, madali mo nlng maintindihan kung pano mo e-connect yung mga wirings kasi dalwa lng naman yung linya (positive & negative) na kailangan mo e dugtong sa lahat ng putol mo ng neon flex. Basta't kada dugtong dapat parehong positive lahat at parehong negative lahat ang ipagsama-sama bago mo e connect dun sa power supply.
Sa Raon, Quiapo marami. Flexible Neon LED Lights / Neon Flex. Di lang Neon Flex meron dun, marami din iba't ibang klase ng LED lights depende san gagamitin.
Hello sir.. Bumili po ako ng ganyan.. kaso cuttable sya every meter.. Ano po ba dapat klaseng neon flex ang bilhin? Kinut ko po sya ng kapiraso akala ko po pwede.. ayun 1 meter agad ung napundi.
Ang mga nabili kong neon flex pwede naman sya e cut kahit saan basta't dun mismo sa may markings sa gilid ng neon flex. Merong visible line every 1 inch dun lang pwede mag dugtong ng wires.
Flexible Neon Strip Light, pareho lng naman siguro yan kasi pwde naman sya e cut ng per meter or per inch(2.5cm) or kahit saan basta't dun sya mismo e cut sa may guhit. Makikita sya mismo dun sa Neon Strip. May guhit na black sa isang side kada 1 inch(2.5cm), yun na yung palatandaan na pwde mo sya e cut kasi andun yung maliit na Copper/Rod (Positive & Negative) na pagdudugtungan ng wires.
Ah ganun ba, baka nga ibang neon strip yun. Yung nabili ko kasi kumuha lang ako ng maikli at sinubukan kong balatan ng goma ang neon flex para makita ko kung ano porma ng mga ilaw nya sa loob at san pwde mg dugtong ng wires. Di naman napoponde kahit nabalatan na basta't di lng natatamaan ng cutter yung mga ilaw. At kung maganda pagkahiwa nung goma nya pwede rin naman e dikit sa glue para mabalot ulit.
Meron mga gumagawa sa Quiapo/Raon nasa Php 1,000 - Php 1,200 per square foot kung single stroke lang ang Font. Mas Tataas pa ang price depende sa Font at Design.
Nice little set up
Ang galing munaman Nel👏👏👏
wow good~~👍👍👍
You're brilliant! Simply process and satisfying result!
Thanks German Machining.! 👍
New subscriber here. Can you please list down all the items that you used to make this. Aside from strip lights
Example, what kind of glue? Etc. Appreciate the kind answer.. 😊
Clear Acrylic plastic, Vinyl sticker, Flexible Neon lights, 2 to 3 Amperes Power Supply/Adapter, Transparent Wires, Soldering iron, Super Glue (Liquid Silicon Glue).
What glue are you using?
How do you know where to drill the holes ? I’m about to try to make one this weekend but it looks harder than i thought.
Thanks for watching. It should be in every end of the neon flex to make a series wire connection at the back, but i only drill a hole in one end of each piece of neon flex because i connected every piece of it directly to the wire with the main power supply.
Great thank you so much
What did you use to test the connection and supply power to the led strips?
I test it by simply connecting every piece of neon flex with soldered positive & negative wires directly to the positive & negative wires of the power supply.
Nice
What the size of the neon strip please?
6mm X 12mm.
Would it be easier to get a cricut and just print what ever you going to use for the neon light instead of hand cutting the vinyl
Nice idea, thanks. 👍
Ty❤
Which neon led are you using? Whats the cutting distance? Every 10mm
For a 12 volts neon flex, the shortest cut you can apply is 25mm and there is a visible line on the side of neon flex that has copper for soldering which is your guide for cutting.
Great..what kind of glue?
Thank you 👍👍
Super glue, you can also use any similar glue that will work on acrylic plastic and neon flex.
Mi dici il nome della super colla che usi
Great video, which font are you using
Palace Script MT, but modified.
Light brightness should be less
But claps for your work 👏
Thank you sir! This design is the first time I tried to make a neon flex sign so it's not really that perfect. Maybe in my next works I can adjust it.
Nice work, how long did it take ?
8 hrs.
Tga pilipinas ka Pala. Galing tlaga ng Pinoy.
Opo sir, salamat!
Naka series or parallel po ung mga wire?
what wire did you used for series? what size ..
Transparent Wires, Gauge 22 - 26.
Thanks for this vidéo, Can you do a list of the materials that you use for please ??
Acrylic plastic, Vinyl sticker, Flexible Neon LED lights, Power Supply Adapter, Transparent Wires, Soldering iron, Super Glue.
Ano po tawag dun sa color red na dinikit mo sa acrylic board?
Vinyl sticker.
How much cost of this
Kitne meter use kari hai strip light please reply
3 meters.
Size kya hy iska bhai..??
Or kitny ka approximate ka padega??
For two words design with 1 square foot of acrylic plastic, the usable size of neon flex is 2 to 3 meters. The cost depends on your country how much the price of each product.
What type of wire are u using?
Transparent wire connectors.
can you tell me what kind of wire that is and where you get it?
Transparent wire connectors for led neon strip flex, it is similar to the wires used in audio or speaker transparent cables but smaller size. Can be purchased at electronic stores.
@@NorthMindIdeas I am thinking a 22-28 gauge would work?
Yes, the one I used was gauge 26, it's good to use a thinner one so it's easier to bend.
Where i get the transparent plastic sheet
You can buy it from glass stores/acrylic plastic suppliers.
Where can i buy that acrylic sheet and what would it cost ?
In any glass stores in your place.
sir bakit ung mga wire likod pinagsama sama mo lang po? wala po ba syang positive and negative? at ilang powersupply po ginamit nyo kasi po tatlong set po ung pinaghiwalay nyo po sa likod ih.. salamat po..
Parehong negative at parehong postive ang pinagsama-sama ko, di ko lang masyado na focus yung wiring sa video pero nka bukod lahat ng negative at lahat ng postive na may dalwang linyang mgkahiwalay ang pinagdudugtong ko sa isang power supply lang na 2 Ampere.
Mujhe sikhna hai
baka may video kayo on how to arrange ung likod na part at ung pag connect nya into power supply..
Once na mabili mo na lahat ng materials, madali mo nlng maintindihan kung pano mo e-connect yung mga wirings kasi dalwa lng naman yung linya (positive & negative) na kailangan mo e dugtong sa lahat ng putol mo ng neon flex. Basta't kada dugtong dapat parehong positive lahat at parehong negative lahat ang ipagsama-sama bago mo e connect dun sa power supply.
@@NorthMindIdeas ah okie po gets ko na.. haha.. grabe sakit po ng ulo ko kakaisip.. more videos to come sir.. salamat po..
Tell us all materials wholesale market
bka po may link kayo ng pinagbilhan nyo ng lahat ng kailangan kasama ung mga pang power supply na wires at ung mismong neon flex.. salamat po
Wla po, binili ko mismo sa store ng mga LED lights & electrical supply.
Gostei do projeto. Muito bom. Parabéns!
Thanks Edmilson Souza.! 👍
Panu connectionss nia Sir parallel?
Pinagsama-sama ko lng po lahat ng wires na parehong negative at lahat din ng wires na parehong positive connected dun sa wire ng main plug.
sir meron ka links kung san pwede bilhin mga materials?
for a beginner. thnaks!
Wla po, pinupuntahan ko mismo physical store ng bawat materyales na bibilhin ko.
How much was the tool (and what’s it called 😆) that melted the wire?
Soldering Iron tool.
@@NorthMindIdeas thank you so much!
Sir ano po tawag sa silver wire na gamit nyo?
Transparent Wires.
Idol saan mo nabili yang LED cable mo at anung klase po iyan ,badly needed to know🙏
Sa Raon, Quiapo marami.
Flexible Neon LED Lights / Neon Flex. Di lang Neon Flex meron dun, marami din iba't ibang klase ng LED lights depende san gagamitin.
@@NorthMindIdeas Maraming salamat idol❤
Hello sir.. Bumili po ako ng ganyan.. kaso cuttable sya every meter.. Ano po ba dapat klaseng neon flex ang bilhin? Kinut ko po sya ng kapiraso akala ko po pwede.. ayun 1 meter agad ung napundi.
Ang mga nabili kong neon flex pwede naman sya e cut kahit saan basta't dun mismo sa may markings sa gilid ng neon flex. Merong visible line every 1 inch dun lang pwede mag dugtong ng wires.
ruclips.net/video/vZPYQ0tZF_E/видео.html
Sir anong neon strip yan? Kasi meron ganyan na per meter ang cut and per 2.5cm ang cut, yung sayo po kasi kahit saan pwede icut eh
Flexible Neon Strip Light, pareho lng naman siguro yan kasi pwde naman sya e cut ng per meter or per inch(2.5cm) or kahit saan basta't dun sya mismo e cut sa may guhit. Makikita sya mismo dun sa Neon Strip. May guhit na black sa isang side kada 1 inch(2.5cm), yun na yung palatandaan na pwde mo sya e cut kasi andun yung maliit na Copper/Rod (Positive & Negative) na pagdudugtungan ng wires.
@@NorthMindIdeas yung nabili ko kasi boss per meter ang cut, don lang may line eh
Ah ganun ba, baka nga ibang neon strip yun. Yung nabili ko kasi kumuha lang ako ng maikli at sinubukan kong balatan ng goma ang neon flex para makita ko kung ano porma ng mga ilaw nya sa loob at san pwde mg dugtong ng wires. Di naman napoponde kahit nabalatan na basta't di lng natatamaan ng cutter yung mga ilaw. At kung maganda pagkahiwa nung goma nya pwede rin naman e dikit sa glue para mabalot ulit.
ruclips.net/video/vZPYQ0tZF_E/видео.html
Q cola e essa ?
Cyno Super Glue.
Dada Elite Golu Naam ki AVN ki
Where r u from
Philippines
Were you from
Philippines.
sir anong glue gamit mo po?
Super glue na pwde dumikit sa rubber at plastic.
Kitna paisa lge ga
Around Php 1,000 - Php 2,000 for that design.
This look like it would take me a month. Lol
Lol 😆😆.
Is it glass?
No, its acrylic plastic.
@@NorthMindIdeas Thanks for replying😊
Ano size po ginamit mo led
6mm x 12mm size po nabili ko.
@@NorthMindIdeas salamat po
If u can make one for me for my car let me know
I wish I could, but unfortunately your place is far from ours.
Pahingi nmn ng link sa flexible neon light boss
@@NorthMindIdeas link po Sana sa store ng bibilhan ninyo 😊
facebook.com/SophiasLedLights?mibextid=ZbWKwL
no polarity
Magkano pagawa
Meron mga gumagawa sa Quiapo/Raon nasa Php 1,000 - Php 1,200 per square foot kung single stroke lang ang Font. Mas Tataas pa ang price depende sa Font at Design.
எந்த ஊர்
Philippines.
Number?
Need Darling machine
Pwedi po magpagawa???
Pwde naman. 🙂
@@NorthMindIdeas how much po? GOSPEL LIGHT ang words
Depende po sa size at font design ng ipapagawa nyo.
Message mo nlng dito ang details. Send ko dito layout design. n.mindph@gmail.com
Good day po ask me magkaano pagawa signed
Piso wifi & eload
gcash cash in
Depende po sa size at font design na ipapagawa nyo. Kung sa Raon Quiapo pagbabasehan na price nasa 1,100 per square foot po presyuhan nila dun.
Dada Naam Bata do to
Northmind.
Music is more than annoying 😌
Thanks for informing, maybe next time I will choose nicer music background. 👍
😢😢😢
What is the sticker material used?
Vinyl Sticker.
bka po may link kayo ng pinagbilhan nyo ng lahat ng kailangan kasama ung mga pang power supply na wires at ung mismong neon flex.. salamat po
Wla po, binili ko mismo sa store ng mga LED lights & electrical supply.