Another amazing surfacing tutorial! As an Industrial Designer with hybrid modeling experience, following along with this lesson has allowed me to gain and learn more. Some really good methods in here which I will be applying to my surfacing models. Great pace and great communication!
LINK FOR 3D WE USED IN VIDEO [free download]: Link1 CgTrader.com - www.cgtrader.com/free-3d-models/electronics/computer/tutorial-parts Link2 GrabCad.com - grabcad.com/library/tutorial-parts-2
Good tutorial dude! It seems you can model some F1 parts. Try to make a tutorial about that. Surface complexity on modern front wings is extremely mad! I bet it's gonna be a best tutorial about complex surfacing with solidworks on youtube! Cheers!
Hi I hardly appreciate you. The tutorial is awesome My all problem of surface modelling is clear Whenever I make model I allways face problem for surface tangency.
Спасибо большое! Мега-полезно! Правда моя модель немного отличается (SW2017 некоторые моменты не пропускал), но в целом все корректно, геометрия отличная. В SW поверхностное моделирование знаю плохо. пока. Ваш урок весьма помог. ... Use hotkeys, colleagues. It is very effective. I don't even remember where some command buttons are located in SW :-) As I go through the lesson, I usually immediately prescribe the keyboard shortcuts for the commands that I need most. It speeds up the workflow
That's a Really good video! I have the spacemouse enterprise too BUT the dimensions are just like the real??? I'm planning to make a portable case with a 3D printer in order to protect the joystick and reduce transport space
well I understand that, I am from Serbia for example but I choose to record in English cause I know I can help more people, believe Russians do the same ;)
well I've noticed Russian and simillar slavic people like Belarus and even Serbs do know English but they still like watching videos in their own language mozemo da probamo da pricamo i na srpskom umesto na engleskom! :P :D
Wait! @ 1:54 you use Insert Part "from original part" Am I missing another tutorial here, where did that part come from? I am 100% with you until this point. I want to also add that this has been extremely helpful , thanks!
no, there is no other tutorial you need to watch, something was just wrong with file I was working on so I had to give my model to be inserted as a part
Phone Industry I’m not sure what you meant by “original part” I’ll try sketching that section only and see if I get the correct surface match. I don’t expect you to walk me through it here in the comments section. Even if I finish with the defect this has been a helpful tutorial. Thanks!
hey man, just saw your comment, have you managed to go over it basically tutorial was made in a way that you do what's shown but also there is a part that you need to download and insert it inside, hard to explain why xD
Phone Industry I have not made it back to that point yet. I don’t know where to download the part you inserted. I know a guy that is a a high level Solidworks designer and thought I would show him the problem when I can, he might be able to tell why the surfaces didn’t match correctly and if so I’ll let you know. Until then, I don’t know where I would download the part you inserted so I’ll save a copy to show my friend and continue the tutorial to the end with the bad surface match just for practice. If you know where I can get the part please let me know, if not no problem. Thanks for replying.
Thanks for this tutorial. Great work but a lot of problems i saw. I have more time to need to look at your video than to build it. I build it in Creo and it was done in one day. Not so much problems as in Solidworks and much esiar to build. Even the buttons 1 to 12 are ready. The other ones i build tomorrow and i will post a little video here
@@phoneindustrydesign wel i just publish it on grabcad.com/library/3d-connexion-spacemouse-enterprice-1 my buttons are not so nice as youre buttons thanks again for the tutorial
your model looks very good, I see you've been busy fixing those surfacing issues :D your buttons are good, just add filets and you're done. You're welcome
Prasanna R N you're welcome Well I always try to use arc instead of spline from few reasons Easy to model and define Easy to work with the surface you get out of arc comparing to the one you get by using spline Also when it comes to creating both model and TUTORIAL MODEL which needs to be simple and without errors arc is better choice
Thanks for the quick reply! What are your views on tangential vs curvature continuous surfaces? With splines I can get curvature continuous ones but not with arcs, right?
that is the area that I should maybe cover with a video, basically tangency between surfaces creates different shape from the curvature transition, of course it can not be done with arcs but I guess it is always less complicated and therefore cheaper to produce a part that was modeled by arcs then the one done with splines etc. ;)
That would be great! One final question. How do you get the measurements that you used in the base sketches? I would like to model my XBOX One controller but I don't know where to start.
well for all tutorial you were able to see on my chanel I do it like this - visit the offical product website and see what dimensions are listed, then I take what I have [meter scale or basic school ruler] and then I measure the rest of things which are not listed on the website you need to look at the object you want to measure just like it is in solidworks, look and measure from front, side [left or right], top, bottom etc. take those measures and make some sketches or something then by seeing the shape see how are you gonna set the process of modeling and by knowing how are you gonna model it you will then see what other measures you also need now of course there are some stuff that are hard to measure so sometimes you have to guess but it is interesting process now of course, it's always good to have some real measuring tool such as caliper and micrometer but not having those didn't really stoped me from creating logitech m185, logitech m705, spacemouse and a lot of other models - they are maybe not perfectly precise but not bad either plan of how are you gonna do it and using right modeling techniques is to me more important then right measures, that's why I am making all these videos also don't forget one thing, if you can't well measure whole model but only base dimensions you can always take images of it or find on internet and those images you can set up in sketches as a blueprints by the way good question, I get it many times so I may do a video about it! :D
I have one task with which I can not cope. I also can find a solution on the Internet. The task is related to the application of texture on the surface. If you're curious, I'll tell the magician about this task, and you're shooting a video for training.
believe it or not I just look carefully at objects and that makes the most of how I get curve data, also I search for images online if you want to measure curve from an object you can buy curve ruler I think it's called like that
I'm making a good progress on this tutorial, is excelent BTW, my Solidworks version is 2015 and cannot advance due the fix surfaces are in future version, do you know how can I use this file? Can I converter to a older version?
ahhh ok, well just so you know I earn around 15-20$ from this channel to pay the internet bill so if I cut commercials I won't get even those dollars xD
1:10:30 I cannot select the single short edge.... when I put my cursor on the edge it only activates the total edge of the surface.. can you help me..?
Hi thanks for a great video. Im having a problem about 10% into the video where you draw a line from the sketch in right plane from one surface to the opposite surface and then construct two line to get the angle. After trying many times to connect the first line i finally switched to 3d sketch and accomplished the point to point., but now it wont allow me to dimention between the horizontal line and the off horizonal (3 degree) line. Any suggestions?
Hi PI. I found the problem. I forgot to hide the left side of the artifact from sketch 2 and so was trying to connect beyond the right plane Sorry for wasting your time Andy
At 2:47:54 I'm not able to offset surface. It shows failing surface of that fillet & surface fix 2. Please give me alternate solution please. I've done till here everything perfect as yours. But idk why failing surface arrives. Please please give me alternate way to do that step. Please Edit:- even u r saying i cannot believe it's working 😭means you know prblm will arrive . Then u must have solution please
This is ABSOLUTELY not the way to model this type of surface. 3 sided surfaces, 5 sided surfaces, point condition patches, G1 surface conditions. Just no. It's really important that you plan your model to construct it using 4 sided surfaces and achieve G2 or G3 surface conditions for this type of product.
hey man, I do agree with you but my main job is to be freelancer and try make money to survive, making tutorials is something I was doing in a free time anyways I spent a lot of time trying to achieve what you explained - four sided surfaces with G2 or G3 surface conditions but after a while it was going nowhere so I had to quit, lower my standards and do it in a more simple way perhaps it was not smart idea but I did the best I could with the time I had
![Kodak Black - Sharp Vibes [Official Music Video]](http://i.ytimg.com/vi/oEV0OoLJeIs/mqdefault.jpg)
TIMELINE:
00:00 - 00:04 BRAND INTRO
00:04 - 01:15 TUTORIAL INTRO
01:20 - 14:40 #1 - BASE SKETCHES
14:45 - 31:16 #2 - BASE SURFACING
31:20 - 49:33 #3 - SIDE SURFACE 1
49:37 - 1:04:08 #4 - SIDE SURFACE 2
1:04:12 - 1:25:07 #5 - TOP FACE 1
1:25:11 - 1:51:41 #6 - TOP FACE SHAPES
1:51:45 - 1:56:30 #7 - FIXING ERRORS
1:56:34 - 2:28:53 #8 - FINISHING THE SHAPE
2:28:57 - 2:53:23 #9 - SURFACE TO SOLID BODY
2:53:28 - 3:14:23 #10 - FINAL DETAILS
3:14:27 - 3:17:41 QUICK REVIEW
3:17:41 - 3:17:45 BRAND OUTRO
Another amazing surfacing tutorial! As an Industrial Designer with hybrid modeling experience, following along with this lesson has allowed me to gain and learn more. Some really good methods in here which I will be applying to my surfacing models. Great pace and great communication!
I like to hear comments like these and the fact my videos were useful, stay well! 💪😁
SPACEMOUSE ENTERPRISE [used as navigation tool in the video]:
www.3dconnexion.eu/products/spacemouse/spacemouse-enterprise.html
LINK FOR 3D WE USED IN VIDEO [free download]:
Link1 CgTrader.com - www.cgtrader.com/free-3d-models/electronics/computer/tutorial-parts
Link2 GrabCad.com - grabcad.com/library/tutorial-parts-2
Good tutorial dude! It seems you can model some F1 parts. Try to make a tutorial about that. Surface complexity on modern front wings is extremely mad! I bet it's gonna be a best tutorial about complex surfacing with solidworks on youtube! Cheers!
Not bad idea, although I am more into phone design at the moment but will consider doing some f1 stuff 😄
Tnx
Your tutorials are great. They boost my confidence for complex projects. Thank you!
Jee Z this one boosted mine as well hahaha
Glad videos are useful, have a good one mate! 😁
Thank you for such an in depth tutorial
you're welcome mate
Так хотелось рекламу посмотреть... а ты со своим SolidWorks пристаёш))
sorry I am not sure what you mean? :)
EXCELLENT
Hi I hardly appreciate you.
The tutorial is awesome
My all problem of surface modelling is clear
Whenever I make model I allways face problem for surface tangency.
Thanks, I hope video made it more clear now when it comes to surface tangency?
thank you very much. I from Viet Nam
Спасибо большое! Мега-полезно! Правда моя модель немного отличается (SW2017 некоторые моменты не пропускал), но в целом все корректно, геометрия отличная. В SW поверхностное моделирование знаю плохо. пока. Ваш урок весьма помог.
...
Use hotkeys, colleagues. It is very effective.
I don't even remember where some command buttons are located in SW :-)
As I go through the lesson, I usually immediately prescribe the keyboard shortcuts for the commands that I need most. It speeds up the workflow
nema na cemu, pozdrav iz Srbije! :)
Thanks a lot anyway and Hello from Ukraine!!!
Thank you. Your video tutorial is useful.
thank you! ;)
hahaha take a look at the funnest moment of the video 1:25:03 really dude you are making a good job
hahaha yeah, thanks!
good job! thanks big for that deal!
you're welcome!
great
I did but different way it's very good option to take project curves instead of doing all of much sketches planes and wasting time...
I agree but I trust more surfaces then project curves
Thanks though uploading the tutorials it's helpful someway i hope you upload more new projects.
I hope too :D
Great Video
thanks!
Learnt a lot from this. Thank you, Petar. Can I ask what software you use to record your screen?
Solid Byte sorry I haven't seen the comment, I use camtasia studio 8.0 😃
That's a Really good video! I have the spacemouse enterprise too BUT the dimensions are just like the real??? I'm planning to make a portable case with a 3D printer in order to protect the joystick and reduce transport space
Well perhaps dimensions are not 100% perfect but I tried, see if you can do this with the video I've made
@@phoneindustrydesign I'll let you know how the case works, thanks you very much again
Ok man, you're welcome
Thank you for sharing.Did you have video tutorial for insert part2?
no unfortanetly not, sorry
In the Russian language segment of the Internet such wonderful video lessons do not exist.
well I understand that, I am from Serbia for example but I choose to record in English cause I know I can help more people, believe Russians do the same ;)
I am from Belarus.
People rarely watch videos without translating into Russian.
If only they told me 20 years ago that the Belorussian and the Serb would communicate in English ... I would not believe in this.
well I've noticed Russian and simillar slavic people like Belarus and even Serbs do know English but they still like watching videos in their own language
mozemo da probamo da pricamo i na srpskom umesto na engleskom! :P :D
Ја користим преводиоца.
Познавање бјелоруског језика омогућава ми да читам и исцртавам све језике словеначке групе.
thanks
Maximillian Gubbins you're welcome 😁
very nice thank you
;)
Wait! @ 1:54 you use Insert Part "from original part" Am I missing another tutorial here, where did that part come from? I am 100% with you until this point. I want to also add that this has been extremely helpful , thanks!
no, there is no other tutorial you need to watch, something was just wrong with file I was working on so I had to give my model to be inserted as a part
Phone Industry I’m not sure what you meant by “original part” I’ll try sketching that section only and see if I get the correct surface match. I don’t expect you to walk me through it here in the comments section. Even if I finish with the defect this has been a helpful tutorial. Thanks!
hey man, just saw your comment, have you managed to go over it
basically tutorial was made in a way that you do what's shown but also there is a part that you need to download and insert it inside, hard to explain why xD
Phone Industry I have not made it back to that point yet. I don’t know where to download the part you inserted. I know a guy that is a a high level Solidworks designer and thought I would show him the problem when I can, he might be able to tell why the surfaces didn’t match correctly and if so I’ll let you know. Until then, I don’t know where I would download the part you inserted so I’ll save a copy to show my friend and continue the tutorial to the end with the bad surface match just for practice. If you know where I can get the part please let me know, if not no problem. Thanks for replying.
I left two links bellow the video to download the missing part: www.cgtrader.com/free-3d-models/electronics/computer/tutorial-parts
Thanks for this tutorial. Great work but a lot of problems i saw.
I have more time to need to look at your video than to build it.
I build it in Creo and it was done in one day. Not so much problems as in Solidworks and much esiar to build.
Even the buttons 1 to 12 are ready. The other ones i build tomorrow and i will post a little video here
Sorry for late reply, yes I should have made it more simple
Anyways share your work if you can
@@phoneindustrydesign
wel i just publish it on grabcad.com/library/3d-connexion-spacemouse-enterprice-1
my buttons are not so nice as youre buttons
thanks again for the tutorial
your model looks very good, I see you've been busy fixing those surfacing issues :D
your buttons are good, just add filets and you're done.
You're welcome
Nice Petar now can we get someone to model a Schuberth SF1 pro race helmet?
ellesse59 you are looking for someone to model it for you or you want tutorial about it?
Hey, Thanks for the tutorial. Is there a reason you prefer arcs over splines? Easy to fully define?
Prasanna R N you're welcome
Well I always try to use arc instead of spline from few reasons
Easy to model and define
Easy to work with the surface you get out of arc comparing to the one you get by using spline
Also when it comes to creating both model and TUTORIAL MODEL which needs to be simple and without errors arc is better choice
Thanks for the quick reply! What are your views on tangential vs curvature continuous surfaces? With splines I can get curvature continuous ones but not with arcs, right?
that is the area that I should maybe cover with a video, basically tangency between surfaces creates different shape from the curvature transition, of course it can not be done with arcs but I guess it is always less complicated and therefore cheaper to produce a part that was modeled by arcs then the one done with splines etc. ;)
That would be great!
One final question. How do you get the measurements that you used in the base sketches? I would like to model my XBOX One controller but I don't know where to start.
well for all tutorial you were able to see on my chanel I do it like this - visit the offical product website and see what dimensions are listed, then I take what I have [meter scale or basic school ruler] and then I measure the rest of things which are not listed on the website
you need to look at the object you want to measure just like it is in solidworks, look and measure from front, side [left or right], top, bottom etc. take those measures and make some sketches or something
then by seeing the shape see how are you gonna set the process of modeling and by knowing how are you gonna model it you will then see what other measures you also need
now of course there are some stuff that are hard to measure so sometimes you have to guess but it is interesting process
now of course, it's always good to have some real measuring tool such as caliper and micrometer but not having those didn't really stoped me from creating logitech m185, logitech m705, spacemouse and a lot of other models - they are maybe not perfectly precise but not bad either
plan of how are you gonna do it and using right modeling techniques is to me more important then right measures, that's why I am making all these videos
also don't forget one thing, if you can't well measure whole model but only base dimensions you can always take images of it or find on internet and those images you can set up in sketches as a blueprints
by the way good question, I get it many times so I may do a video about it! :D
I have one task with which I can not cope.
I also can find a solution on the Internet.
The task is related to the application of texture on the surface.
If you're curious, I'll tell the magician about this task, and you're shooting a video for training.
application of texture on surface? :)
Yes exactly.
But there is not so simple.
If you are interested, I'll send you photos.
You immediately understand everything.
send it to my facebook page then ;)
Thanks a lot! I have a problem, my base sketches get absorbed into the features, how may i sort it out?
I don't understand what you mean?
Hi, there is no tutorial for the keybuton?
thanks
that would be too much work
How You Rotate And Pan time 2.11.02 and 2.12.53 And In All In Your Tutorial? Please Reply
For this video I used space mouse so I pressed top view button on it and it moved me, you can't do it with regular mouse so it does look weird
@@phoneindustrydesign Thank you So Much. And thanks for Reply like 4g.
@@harvijaysinhgraj5917 by the way on second pan I only rotated slightly my view from top to bottom
You're welcome mate
How do you get all the curve radius data for an object?
believe it or not I just look carefully at objects and that makes the most of how I get curve data, also I search for images online
if you want to measure curve from an object you can buy curve ruler I think it's called like that
I'm making a good progress on this tutorial, is excelent BTW, my Solidworks version is 2015 and cannot advance due the fix surfaces are in future version, do you know how can I use this file? Can I converter to a older version?
I think I've added igs file or something for it, email me so I can send you file
@@phoneindustrydesign sure, can I have your email?
vertex3ddesignes@gmail.com
Everything is fine. I joked that there are many commercial breaks.
ahhh ok, well just so you know I earn around 15-20$ from this channel to pay the internet bill so if I cut commercials I won't get even those dollars xD
1:10:30 I cannot select the single short edge.... when I put my cursor on the edge it only activates the total edge of the surface.. can you help me..?
I can help you but not now, wait till tomorrow 😃
@@phoneindustrydesign thank you very much!!!!!
Oh! I found out how to solve it. There is something that I missed while making the boundary surface. Thanks! :)
@@jungyeonkim8647 lol perfect 😁✌
Hi thanks for a great video. Im having a problem about 10% into the video where you draw a line from the sketch in right plane from one surface to the opposite surface and then construct two line to get the angle. After trying many times to connect the first line i finally switched to 3d sketch and accomplished the point to point., but now it wont allow me to dimention between the horizontal line and the off horizonal (3 degree) line. Any suggestions?
Well you should have done everything as I did, please show me on video timeline where is the issue?
@@phoneindustrydesign After successfully doing Surface-Revolve1 ,at time 29:26 I entered sketch on right plane and could not connect to that corner.
Hi PI. I found the problem. I forgot to hide the left side of the artifact from sketch 2 and so was trying to connect beyond the right plane
Sorry for wasting your time
Andy
Ohhh it's OK my man, good you find what was causing the issue
Good luck with this tutorial
Верујем да мој предлог да примените текстуру на површину комплексног тела које вас не занима?
zanima me, dobar ti je srpski!
At 2:47:54 I'm not able to offset surface. It shows failing surface of that fillet & surface fix 2. Please give me alternate solution please. I've done till here everything perfect as yours. But idk why failing surface arrives. Please please give me alternate way to do that step. Please
Edit:- even u r saying i cannot believe it's working 😭means you know prblm will arrive . Then u must have solution please
try deselecting the smallest surfaces
@@phoneindustrydesign u mean that fillets
@@arjunkapadia1712 yeah, those are the ones
Can you send me the file you modelled
Email me
Sohaib.akbar78666@gmail.com
This is ABSOLUTELY not the way to model this type of surface. 3 sided surfaces, 5 sided surfaces, point condition patches, G1 surface conditions. Just no.
It's really important that you plan your model to construct it using 4 sided surfaces and achieve G2 or G3 surface conditions for this type of product.
hey man, I do agree with you but my main job is to be freelancer and try make money to survive, making tutorials is something I was doing in a free time
anyways I spent a lot of time trying to achieve what you explained - four sided surfaces with G2 or G3 surface conditions but after a while it was going nowhere so I had to quit, lower my standards and do it in a more simple way
perhaps it was not smart idea but I did the best I could with the time I had
РУССКИЙ? )))
srpski :P