ESP8266 Wireless Nextion HMI || Outseal Arduino PLC || FLProg
HTML-код
- Опубликовано: 5 сен 2024
- #esp8266 #arduinoPLC #outseal #flprog #nextion #hmi #wemos #modbus
The Nextion Display connected to the Wemos D1 mini ESP8266 wirelessly controls an Outseal Arduino Nano PLC with the DT-06 WiFi module. A FLProg program was written for the Wemos D1 mini ESP8266 to control the attributes of the Nextion display. The Wemos D1 mini ESP8266 inbuilt WIFI module being the Modbus master communicates with the DT-06 WIFI module connected to the Outseal Arduino PLC using the Modbus RTU over TCP protocol. The Outseal Arduino Nano PLC is a Modbus RTU slave by default. A simple demonstration counter program written for the Outseal Arduino Nano PLC is controlled by the Nextion HMI touch screen.
Outseal PLC Program 00:16
DT-06 WiFi Module 01:34
Nextion NX3224T028 HMI 02:47
Nextion Editor 04:01
ESP8266 FLProg Program 06:41
Nextion Editor Download
nextion.tech/
Outseal Studio Download
outseal.com/si...
FLProg Download: flprog.ru/en/
flprog.ru/en/d...
Buy the required hardware for this video from Aliexpress with these links to support this channel.
1. Arduino Nano V3.0
s.click.aliexp...
2. Terminal Adapter Board For Arduino Nano
s.click.aliexp...
3. ESP8266 Wemos D1 Mini V3.0.0
s.click.aliexp...
4. Nextion TFT HMI Display
s.click.aliexp...
5. DT-06 WiFi Module
s.click.aliexp...
6. Breadboard
s.click.aliexp...
7. Jumper Wire
s.click.aliexp...
Link to previous videos:
#1 How to Program Outseal Arduino PLC - Getting Started
• #1 How to Program Outs...
#2 How to Program Outseal Arduino PLC - Studio Overview
• #2 How to Program Outs...
#3 How to Program Outseal Arduino PLC - Contacts & Relays
• #3 How to Program Outs...
#4 How to Program Outseal Arduino PLC - Latch & Flip
• #4 How to Program Outs...
#5 How to Program Outseal Arduino PLC - Water Pump Control
• #5 How to Program Outs...
#6 How to Program Outseal Arduino PLC - Delay -Timers
• #6 How to Program Outs...
#7 How to Program Outseal Arduino PLC - ROTON & SPWM
• #7 ROTON & SPWM | How ...
#8 How to Program Outseal Arduino PLC - Counters
• #8 Counters | How to P...
#9 How to Program Outseal Arduino PLC - Pump Control Sequence
• #9 Pump Control Seque...
#10 How to Program Outseal Arduino PLC - Comparison
• #10 Comparison | How t...
#11 LM35 and 4-20mA Industrial Temperature Sensor to Outseal Arduino PLC
• #11 LM35 and 4-20mA In...
#12 Free VTScada (Free Licence) Modbus Digital Read/Write
• #12 VTScada (Free Lice...
#13 VTScada (Free Licence) Modbus RS485 Analog Read Write
• #13 VTScada (Free Lice...
#14 OP320 HMI Modbus Communication
• #14 OP320 HMI Modbus C...
#15 HC 05 Bluetooth Modbus Android HMI
• #15 HC 05 Bluetooth Mo...
#16 DT 06 WIFI Android Modbus HMI
• #16 DT 06 WIFI Android...
#17 DS3231 RTC Scheduled Operation Timer
• #17 DS3231 RTC Schedul...
#18 I2C Extended Inputs Outputs
• #18 I2C Extended Input...
#19 Modbus Master Coil Read/Write | Outseal Arduino PLC
• #19 Modbus Master Coil...
#20 Modbus Master Analog & Digital Input Read | Outseal Arduino PLC
• #20 Modbus Master Anal...
#21 Modbus Master Holding Register Read/Write | Outseal Arduino PLC
• #21 Modbus Master Hold...
How to Control Servo Motor | Outseal Arduino PLC • How to Control Servo M...
Outseal PLC Modbus LCD HMI • How to Make PLC LCD HM...
LM75 Temperature Sensor | Outseal Arduino PLC • LM75 Temperature Senso...
OUTSEAL PLC 20x4 LCD MODBUS HMI || Modbus Settings Mode • OUTSEAL PLC 20x4 LCD M...
Good job
Thanks
Nice
Thanks
Good job. Thank you. Will you make a video about outseal programming of multi servo control with PCA9685 and arduino nano? :)
Thanks! I don't have a working module yet.
@@OnosTech Thank you. We are waiting for it. Is it possible to make multi servo control by oneseal prog, arduino nano and PCA9685?
How to connect dwin HMI
Hi Onos:
I finally got my "nextion" display, I used the AliExpress link according to Number 4 on the list
4. Nextion TFT HMI Display
But the only display available was the TJC3224T028_011R
I created the TFT file following your instructions but the display shows the message:
Model does not match
Device Model:
TJC3224T028_011R
¿What´s wrong?
I really appreciate your help!
One of the best Arduino based Modbus Tutorial..
Is there any option to set Parity from LCD..?
Thanks!
If you have downloaded the latest beta version, you can use the Port parity block under the Modbus special features on project tree on the left of FLProg.
@@OnosTech I'll give it a try and update u.
Thanks again..🤗
I AM USING THIS HMI OR ARDUINO WITHOUT BLUETOOTH OR NODMCU HOW TO CONNECT
It's great, but can you make a video with the rs485 network so that the HMA can be connected to the Arduino with a wire?
You can do it if you follow the earlier steps in the below video.
ruclips.net/video/g0OqOib9Lag/видео.html
You can do it if you follow the earlier steps in the below video.
ruclips.net/video/g0OqOib9Lag/видео.html
How to make problem,run for stepper using outseal
What if i want to use HMI dan IOT? Can u make a video for this? Thank u sir
How modul nrlf24 using outseal