Very helpful advice, I appreciate it. Thanks for sharing your knowledge and experience with us in such a non threatening manner. Meaning, you did not talk down to us rather you parlayed wisdom in humility. Great job
I agree completely. This is RUclips at its finest. I teach carpentry and this is now a 'go to' video for the students to see when we cover these types of tools. Subbed!
I was taught (over 30 yrs ago) to set up the torch so the valves are on the same side as the tip. Easier adjustment and less chance of bumping the knobs and throwing out the mixture. Also, I strongly agree with 1/4 turn on acetylene so it turns off fast in emergencies. Great video overall
Great job with taking your time to explain things. I'm in a welding class now and you did a better job with taking your time so others can understand then my teacher does.
I watched a lot of videos trying to learn what i can. Your video was the best one yet. You talked normal and simplified it so I,understand what the hell you are saying. Thank you
I have to start a new job this week and they were really leaning on me to know some things that I haven't practiced since Millwright school. Thank you very much for your video, the information was sincere and concise, you should consider a position at an instructing facility. 5-6 rule.. I love it. Cheers.
It has been years since I have had to use a cutting torch. You brought back all I learned in welding school. Best video I have seen on the subject. Thank you
Very well done instruction on using an acetylene torch. Really glad that you pointed out the 15 PSI max limit, since most don't know that acetylene that isn't dissolved can do nasty things over that limit.
“...or if you’ve got one and don’t know how to use it.” My dude this vid is gold! I just heated and bent a wrench to get the angle on transmission line fittings. Saved me sooo much cursing!! Rusty or seized fittings or bolts will now fear me.
thank you so much for this video, i just bought a full sized setup used from a neighbor with a cutting torch and honestly was afraid to even try it without some guidance. this was the guidance i needed.
Omg life saver... switched from natural gas to acetylene setup and was about to chuck the whole system... that feather made allll the difference! When from producing straight coal to butter! You're the best!
Dude, I had a friend of mine "attempt" to teach me how to use a Oxy/Acetelyne set-up I'd just purchased and he FAILED. "THIS" single video, you explained MORE than he did "in-person!!!" Thank you, very much!!!!
I'm an electrician, but I have to do a variety of things where I work. Often, I'm on my own and have to pick up a new skill in a short period of time. I saw three other videos, and yours was the one which explained all of the information which I needed. I sure didn't do a pro job, but I got the job done. Thanks plenty!
Thanks for this video. I'm just starting to learn welding at my local career and tech center, and this video has helped me understand what I was doing wrong in class today. With a lot of students new to welding, everyone needs individual attention for help and can't always get the help they need. I was letting my cones get too big, and definitely moved too slow and was melting my practice plates during the cuts. Again, thanks for this video for refreshing what I forgot on my first day today. I love being able to come home and look on youtube for help.
Victor Ryan Glad I could help. Good luck in the welding industry it's a lot of hot work get used to getting burned a lot lol. Let me know if you have any questions I'll be glad to help.
Gorgeous work, instruction, and craftsmanship sir! You do an excellent job in explaining the basics!! I came in out of the shop to find a good teacher for better operating methods on cutting steel. You have provided exactly what I was searching for sir. Im headed back to the shop now. Be safe and God Bless you my friend.
Thank you. Not many people or places will teach you this for only a like out and share. I’ll come back to freshen up on my basics with this video. Great video and teacher.
thank you so much for the informative video! my welding classes were trimmed down to 5 weeks instead of 8 due to the pandemic and i didn't get the chance to use a cutting torch and i have a weld test for a job this week that i need to use a cutting torch for!
Not many people like you, son,....classic work with classic instruction. Thank you for just being you..... I appreciate your way of explaining proper methods. Wish you the best of 2020
Thanks so much for sharing knowledge with us noobs. I know virtually nothing about oxy-acetylene but want to try it out. I now feel confident that I can do it without much fear.
when i learned to use a torch in ag class they always said to stay off to the side of the regulator so if the handle blew out it wouldn't hit you think you would have to have a really bad regulator to do it but that's the way i learned. Liked the refresher on settings, always good to review things so you don't get in a rut of doing the Wrong thing !! THANKS again
Great video man! I embarrassed my self today trying to cut a hole using a torch for the first time ever and really needed a good video to explain it all. This is a great video and I'll make sure to reference this video again. Thank you again, cheers from New York
A very nice presentation and safety attention given to pressure and precautions! Thank you for your experience and wisdom! I have been around 50 years and as a kid I had experienced men took me under their wings from torches to arc welder to how to pour lead felt joints! I think a lot is lost to not having exposure to shop classes such as high school or having someone who can explain the safe and Guide to show such as mig or tiger work! The old guys would not wate for me to ask but would explain alot of information about what we were doing and that was very helpful and let me feel not so stupid for asking questions! That is the best way I think is helpful!
Helpful. I work straight with my father's mechanic shop and sometimes we have no choice to use the torch for some stuff so this helps me learn a bit quicker.
Very good job with this instructional video my friend, thank you. There were details that you covered that were left out of a lot of other videos on this subject. Thanks!
Thanks very much. Very simple to understand, very straightforward. I learned sooo much from such a short video. Keep doing what you're do. Much appreciated.
The higher you go above 15psi on acetylene the more friction is created in the line, and the higher chance of the acetylene gas to ignite in the line, never seen it happen though. 😆 GREAT VIDEO
I'm so old I don't do any welding anymore. I was pretty good with a cutting torch and with a mig machine. I never did get the hang of a stick welder.I didn't have anyone teaching me and tried self learning. In my case a bad idea. Wish I'd had a couple of your vids. I believe that would have made all the difference.
Thank god that I found your page it’s in totally safe my day I am a new beginner and try to check all for torch cut set up but it’s all waste my time especially the page from my country. It’s clearing understanding now thank you again
I love your videos. Very informative and easy to understand. That said, I notice maybe one thing missing from the safety perspective. Maybe it's over-rated but as I read and understand it, it's highly recommended to have flashback arresters on the bottle side and torch side of the hoses.
Thanks alot for taking the time Bud, Being able to hear a correctly set cutting flame was big deal for me. Mine always made a lotof racket and I was melting more than cutting.
Excellent instruction video. I sure do enjoy your channel and content. Looking forward to future videos. I've watched all your videos. Just wanted to pass along a compliment that your style and delivery has really improved. Keep up the great work. Thanks!
+USNERDOC Thank you. Hahaha I know I watch some of my old videos now and think "Wow I really didn't know what I was doing." But you live and learn. Thanks again that means a lot.
Excellent video, thanks ! All the elements of a good video; not too long, good information & good steady image quality. I have bookmaked this vid to come back to before using my cutting torch.
When I went to welding school in 1982 they started us out with oxy-acetylene. I think they did that because it's slower and you can see the puddle forming, with arc it's almost instantaneous and we did brazing and cutting too. The welding tips were numbered #1 through #14, the #1 tip was supposedly 1 psi acetylene. I think that was for jewellery making, we never used that, I think we used a #5 most of the time at 5 psi, I don"t think we ever went over 10 psi. And all the acetylene gauges were 30 psi with 15 to 30 in red, so never let that needle go beyond the 12'o clock position. Later on when we did multi pass groove welds in 3/8ths plate we would cut the weld. If there were any slag inclusions it would blow back like the 4th of July. Then the instructor told us when you can get a clean flame cut of your weld, then you can start thinking about doing a bend test.
Well after watching this I was able to use a torch on my own for the first time to do what I needed to do and managed to not blow myself up. So I consider it a success.
One thing you didn’t mention was that you shouldn’t get the tip too close to the surface or touch it to the surface while cutting. I have found that it will cause it to make popping sounds and I was told that it can cause the flame to flow back up inside the torch (flashback ). I am not an expert with cutting torches, but that was what I was taught. Not sure if that is correct or not.
Any well equipped welding/burning supply shop has multiple solutions for different types of gases, and torches. 37 years burning thick steel. Acetylene is the least valuable of the gases. If you happen to run your tip too close to the plate it doesn't extinguish the flame, but goes into the tip itself, and because it's copper it just melts. Blowing holes and cleaning the tip decreases the life of the tip much more than 2 piece tips used with all other gases. Burned 26" thick plate(in 1980), and routinely burned/shape cut 12" thick weekly. Propane is the gas that most all Fab/ Steel Service Centers use on "X"-"Y" axis shape cutting machines in Metro Detroit area. For people stuck with Acetylene this guy's advise is spot on. Chasing overtime and Fab closings i have used about everything and my choice is Harris Torches & tips using Propane.
Awesome thanks for this. I just started class and started oxyfuel cutting and then this video popped up lol helpful stuff, I kind of had a hard time finding the right amount of fuel and oxygen. Also keeping a steady line.
EXCELLENT video. Only thing I would add is to the safety side. Might want to mention and show your check valves and/or flame busters. Very important as you essentially have two pressurized bombs at the other end of your hoses.
Watch all your videos! They are great! Haven’t been commenting due to Firestick! Now have the google dongle due to their battle, but know I have learned a ton from you!
Really liked the video. Was using one today at work and had forgotten about how to properly set one (been 15 years). Again thanks for making the video. BTW I didn't know about the oxygen vavle ! ★Open up all the way★
This was a great video, I just started using this to cut off lips on buckets and welding new ones on. This gave me a lot of great info to use, I’m about to go try it right now!
First of all thanks for the video, good information for people just starting. Maybe you could continue a series on useful torch tips and tricks that are useful on the job. I was so lucky to learn from guys like you in the early eighties in Houston. It was rough but I learned a lot from those guys. Anyway stay safe. I always got a kick when a welder started dancing when a piece of slag went down his shirt, until it happened to me,ha ha.
Excellent video. You might mention to never lay an acetylene tank on it's side, or if you do make sure it is upright for a couple hours before you use it. You will wreck your gear just like having more than 15 psi of pressure at the gauge.
Very smart Man who knows his trade. Highly intelligent to the degree of being able to convey his knowledge to tenderfoots making a complicated and dangerous system seem like childs play. As you know, common sense isn't all that common out there my friend! Hahaha. Returning to the basics ALWAYS forces the betterment of any task. Fully enjoyed this video. Love and appreciation from Long Island New York. Kind regards, Mickey
Good instruction video on using the torch and safety tips ...I was lucky to be able to be around a torch when I was a kid and learned a lot ..I once worked for a company that had me cutting 16 in tall I-beams all day and the boss thought I was certified Because he liked my work ..But I had used a torch and practiced over the years to get good at using it... My favorite thing is to braze I would like to learn how to torch weld better with steel rod I have only done it once
+not2fast4u2c Thank you. Very cool aye that is one thing I don't know how to do at all is gas weld. I've seen it done, but not in person. Might have to give it a try.
+Classic Work Brazing and gas welding are not that hard,it is mostly in technique. When I was working at a tourist railroad, i went to night school to learn to weld. I took my practice coupons to work and my boss said they were really good. It was easier than electric welding. I was working on a project at class using rail and the instructor didn't think I would be able to torch cut the rail but I did with a result almost like yours on the plate. An iron worker showed us helpful trick is to lean the flame toward the direction the cut is going so the metal is heated ahead of the cutting flame. This helps make a nicer cut. I learned to braze when I worked for Trane brazing copper to copper, copper to brass, and copper to steel. We used a double tip torch with oxygen and natural gas. I have made around 1600 connections in an 8 hour shift; sometimes with no leaks.
+Roy Reynolds Very nice that is really cool to hear. I took welding for 2 years, and we never touched a brazing rod. I know it is very useful, and can do things that arc welding can't touch. I know what you mean I know on cutting really thick plate its a good idea to make a bigger kerf so the metal has somewhere to go instead of sticking to the rest of the plate. Thanks for the comment.
Brazing probably is the best way to repair cast iron breaks. I have never tried this but understand if a bolt is broken off in cast iron it can be "blown out" by starting to cut the bolt like cutting then turn off the gas and just using the oxygen to remove the steel will leave the threads in the cast iron untouched. Maybe just chase them with a tap to make sure all slag is out.
+Roy Reynolds I've seen my dad fix exhaust manifold breaks with a brazing rod more than a few times. I could see how that would work cast iron has a higher melting temperature than steel plus oxygen does not cut cast iron due to all the graphite in it. I may have to try that one. Thanks man.
having been a welder certified since the early 70's ,,,,, the rule of thumb for us was 8 lbs ace, and 40 oxy .. of course you change as you need to for thickness and so forth . 3 types of flames is involed in welding witch are NEUTRAL , CARBURIZING , OXYDIZING .FLAMES . nice vid ....enjoy
Very helpful advice, I appreciate it. Thanks for sharing your knowledge and experience with us in such a non threatening manner. Meaning, you did not talk down to us rather you parlayed wisdom in humility. Great job
Thank you.
Great video. I have an everlast plasma cutter for general cutting but I believe I won't regret getting a oxy-acetylene setup.
Agreed,this guy is cool
I agree completely. This is RUclips at its finest. I teach carpentry and this is now a 'go to' video for the students to see when we cover these types of tools. Subbed!
Joel Skok no
I was taught (over 30 yrs ago) to set up the torch so the valves are on the same side as the tip. Easier adjustment and less chance of bumping the knobs and throwing out the mixture. Also, I strongly agree with 1/4 turn on acetylene so it turns off fast in emergencies. Great video overall
Thanks for sharing the nessicary information without showing off and wasting time. 🔥
ya
very informative!
Wear ear protection when welding or torching overhead. My Dad suffered a lot after a spark went in the ear. Great video.
Great job with taking your time to explain things. I'm in a welding class now and you did a better job with taking your time so others can understand then my teacher does.
Bro I dont think he can talk any faster. But very informative
I watched a lot of videos trying to learn what i can. Your video was the best one yet. You talked normal and simplified it so I,understand what the hell you are saying. Thank you
Very good tutorial, im an old guy now so its been a long time since I used a torch, but didnt hurt to go back and re-learn the important fundamentals.
Thank you ! Great help to a beginner like me ! And I'm 57 years old I really do appreciate it I look forward to seeing more of your videos
I have to start a new job this week and they were really leaning on me to know some things that I haven't practiced since Millwright school. Thank you very much for your video, the information was sincere and concise, you should consider a position at an instructing facility. 5-6 rule.. I love it. Cheers.
It has been years since I have had to use a cutting torch. You brought back all I learned in welding school. Best video I have seen on the subject. Thank you
Very well done instruction on using an acetylene torch. Really glad that you pointed out the 15 PSI max limit, since most don't know that acetylene that isn't dissolved can do nasty things over that limit.
“...or if you’ve got one and don’t know how to use it.” My dude this vid is gold! I just heated and bent a wrench to get the angle on transmission line fittings. Saved me sooo much cursing!! Rusty or seized fittings or bolts will now fear me.
thank you so much for this video, i just bought a full sized setup used from a neighbor with a cutting torch and honestly was afraid to even try it without some guidance. this was the guidance i needed.
You are a great teacher-any Vocational program would be blessed to have you as an instructor-thanks for a great video.
Omg life saver... switched from natural gas to acetylene setup and was about to chuck the whole system... that feather made allll the difference! When from producing straight coal to butter! You're the best!
Dude, I had a friend of mine "attempt" to teach me how to use a Oxy/Acetelyne set-up I'd just purchased and he FAILED. "THIS" single video, you explained MORE than he did "in-person!!!" Thank you, very much!!!!
bobby90247 Glad it helped. I've been wanting to do a brazing video so you will get your wish. Thanks for the comment.
Thanks for this. It's been 35 years since I touched a torch, so this was a very helpful refresher.
I'm an electrician, but I have to do a variety of things where I work. Often, I'm on my own and have to pick up a new skill in a short period of time. I saw three other videos, and yours was the one which explained all of the information which I needed. I sure didn't do a pro job, but I got the job done. Thanks plenty!
Thanks for this video. I'm just starting to learn welding at my local career and tech center, and this video has helped me understand what I was doing wrong in class today. With a lot of students new to welding, everyone needs individual attention for help and can't always get the help they need. I was letting my cones get too big, and definitely moved too slow and was melting my practice plates during the cuts. Again, thanks for this video for refreshing what I forgot on my first day today. I love being able to come home and look on youtube for help.
Victor Ryan Glad I could help. Good luck in the welding industry it's a lot of hot work get used to getting burned a lot lol. Let me know if you have any questions I'll be glad to help.
Gorgeous work, instruction, and craftsmanship sir! You do an excellent job in explaining the basics!!
I came in out of the shop to find a good teacher for better operating methods on cutting steel. You have provided exactly what I was searching for sir.
Im headed back to the shop now.
Be safe and God Bless you my friend.
Thank you. Not many people or places will teach you this for only a like out and share. I’ll come back to freshen up on my basics with this video. Great video and teacher.
thank you so much for the informative video! my welding classes were trimmed down to 5 weeks instead of 8 due to the pandemic and i didn't get the chance to use a cutting torch and i have a weld test for a job this week that i need to use a cutting torch for!
Not many people like you, son,....classic work with classic instruction.
Thank you for just being you.....
I appreciate your way of explaining proper methods.
Wish you the best of 2020
Nice job on the video! Plainly spoken, easy to follow instructions. No self aggrandizement common to youtube videos. Thank you sir!
This video helped me a lot. I just started welding school and I used the acetylene torch for the first time today. Thank you for the info :)
Thanks so much for sharing knowledge with us noobs. I know virtually nothing about oxy-acetylene but want to try it out. I now feel confident that I can do it without much fear.
Very helpful video. Well done. Wish I had watched it 30 years ago.
That was a very helpful video. Your teaching method is great. Like someone else mentioned, you could teach a class.
Hi Angela😊
when i learned to use a torch in ag class they always said to stay off to the side of the regulator so if the handle blew out it wouldn't hit you think you would have to have a really bad regulator to do it but that's the way i learned. Liked the refresher on settings, always good to review things so you don't get in a rut of doing the Wrong thing !! THANKS again
Also keep hoses out from under what you are cutting so you don't light them on fire
Im glad i was not the only one who saw that
@dr badboy you should always cut fuel off with a cutting tip first, if you cut oxygen off on a cutting tip it will backfire
@dr badboy never turn off oxy first
Joe Smith & Friends Network
... 😎 ...!
Yeah, having a flaming hose with def make you shit a stinky Twinkie.
Absolutely terrific ! This is one of the best videos I've seen. Thank you so much.
Perfect video to watch after learning how to assemble a torch. Answers a lot of questions most basic videos dont answer
Great video man! I embarrassed my self today trying to cut a hole using a torch for the first time ever and really needed a good video to explain it all. This is a great video and I'll make sure to reference this video again. Thank you again, cheers from New York
A very nice presentation and safety attention given to pressure and precautions! Thank you for your experience and wisdom! I have been around 50 years and as a kid I had experienced men took me under their wings from torches to arc welder to how to pour lead felt joints! I think a lot is lost to not having exposure to shop classes such as high school or having someone who can explain the safe and Guide to show such as mig or tiger work! The old guys would not wate for me to ask but would explain alot of information about what we were doing and that was very helpful and let me feel not so stupid for asking questions! That is the best way I think is helpful!
Good refresher and overall instruction. I haven't had to use a torch since the late 80s and that was a few times in HS auto shop.
Nice work. Very useful info and no excess chatter or explaining something over and over.
Haven't used my torches in a few years now, This was an excellent review video. Thanks.
Best tutorial video I've seen in a while. Very helpful.
Helpful. I work straight with my father's mechanic shop and sometimes we have no choice to use the torch for some stuff so this helps me learn a bit quicker.
Nice simple and to the point from someone who knows what your doing, thanks.
I'm just getting started with the "welding world" and this was VERY helpful. Thank you. I'll be following you from now on!
Very good job with this instructional video my friend, thank you. There were details that you covered that were left out of a lot of other videos on this subject. Thanks!
Thanks very much. Very simple to understand, very straightforward. I learned sooo much from such a short video. Keep doing what you're do. Much appreciated.
The higher you go above 15psi on acetylene the more friction is created in the line, and the higher chance of the acetylene gas to ignite in the line, never seen it happen though. 😆 GREAT VIDEO
Man, you should teach welding. Easy to follow for a complete beginner and also good tips for a pro. NICE JOB
Glad I watched your video first. Valuable information. Short and to the point. Great job!
I'm so old I don't do any welding anymore. I was pretty good with a cutting torch and with a mig machine. I never did get the hang of a stick welder.I didn't have anyone teaching me and tried self learning. In my case a bad idea. Wish I'd had a couple of your vids. I believe that would have made all the difference.
It's been a while for me and needed a refresher.... ran across your video and it was a great help! Much appreciated !
Thank you for doing this. I have been using torches for since I was 9 years old. I leaned from this. Great instruction!!!!!!!!!!
Thank god that I found your page it’s in totally safe my day I am a new beginner and try to check all for torch cut set up but it’s all waste my time especially the page from my country. It’s clearing understanding now thank you again
Great lesson. Thanks for sharing. This is the best tutorial on RUclips.
I love your videos. Very informative and easy to understand. That said, I notice maybe one thing missing from the safety perspective. Maybe it's over-rated but as I read and understand it, it's highly recommended to have flashback arresters on the bottle side and torch side of the hoses.
Thanks for the tips. I was doing something wrong but I didn't know what. Now I do and I am going to practice and try to do better.
Thanks alot for taking the time Bud, Being able to hear a correctly set cutting flame was big deal for me. Mine always made a lotof racket and I was melting more than cutting.
Excellent instruction video. I sure do enjoy your channel and content. Looking forward to future videos. I've watched all your videos. Just wanted to pass along a compliment that your style and delivery has really improved. Keep up the great work. Thanks!
+USNERDOC Thank you. Hahaha I know I watch some of my old videos now and think "Wow I really didn't know what I was doing." But you live and learn. Thanks again that means a lot.
Excellent video, thanks ! All the elements of a good video; not too long, good information & good steady image quality. I have bookmaked this vid to come back to before using my cutting torch.
When I went to welding school in 1982 they started us out with oxy-acetylene. I think they did that because it's slower and you can see the puddle forming, with arc it's almost instantaneous and we did brazing and cutting too. The welding tips were numbered #1 through #14, the #1 tip was supposedly 1 psi acetylene. I think that was for jewellery making, we never used that, I think we used a #5 most of the time at 5 psi, I don"t think we ever went over 10 psi. And all the acetylene gauges were 30 psi with 15 to 30 in red, so never let that needle go beyond the 12'o clock position.
Later on when we did multi pass groove welds in 3/8ths plate we would cut the weld. If there were any slag inclusions it would blow back like the 4th of July. Then the instructor told us when you can get a clean flame cut of your weld, then you can start thinking about doing a bend test.
Well after watching this I was able to use a torch on my own for the first time to do what I needed to do and managed to not blow myself up. So I consider it a success.
Excellent Text Book Instruction on lighting cutting and safety, Thumbs up.
Another helpful video. I was never told to pull away from the metal before engaging the metal. Thank you for the tip.
I meant to say engaging the oxygen.
+hairydogstail Aye old timer taught me that. I got ya. ;-)
Great video, keep them coming! Thanks for the info as a weekend DIY/ hobbyist I occasionally forget some of this important information.
I just found your channel. You did an excellent job with adult level instruction. Well done mate 👍
One thing you didn’t mention was that you shouldn’t get the tip too close to the surface or touch it to the surface while cutting. I have found that it will cause it to make popping sounds and I was told that it can cause the flame to flow back up inside the torch (flashback ). I am not an expert with cutting torches, but that was what I was taught. Not sure if that is correct or not.
I was taught that as well.
Really great video man, very informative and said all the right things unlike a lot of people on here lol thanks for helping me out
Nicely done. There needs to be more done on Gas welding processes as it is a dying trade. Thanks for sharing this knowledge. Stay safe.
Any well equipped welding/burning supply shop has multiple solutions for different types of gases, and torches. 37 years burning thick steel. Acetylene is the least valuable of the gases. If you happen to run your tip too close to the plate it doesn't extinguish the flame, but goes into the tip itself, and because it's copper it just melts. Blowing holes and cleaning the tip decreases the life of the tip much more than 2 piece tips used with all other gases. Burned 26" thick plate(in 1980), and routinely burned/shape cut 12" thick weekly. Propane is the gas that most all Fab/ Steel Service Centers use on "X"-"Y" axis shape cutting machines in Metro Detroit area.
For people stuck with Acetylene this guy's advise is spot on. Chasing overtime and Fab closings i have used about everything and my choice is Harris Torches & tips using Propane.
Watched again, I appreciate your slow percice method to teaching!
Awesome vid. Relaxing at the rear end of the truck after teaching. Just need a beer and a cigar!
The reason why it won’t relight after a backfire is because the internal components get oxidized by the oxygen of you turn off the fuel first.
Thanks for a great, easy to understand intro to the torch. Helped me a lot.
New at welding. So I’m very thankful for this video. New sub👍🏽✊🏽
Nice job. Thanks for the efforts. Short and to the point.
Great show of the acetylene and oxygen setting and adjusting the torches
Awesome thanks for this. I just started class and started oxyfuel cutting and then this video popped up lol helpful stuff, I kind of had a hard time finding the right amount of fuel and oxygen. Also keeping a steady line.
Thank you for the great video. I feel like I always learn something useful every time I watch one of your videos. Keep it up!
EXCELLENT video. Only thing I would add is to the safety side. Might want to mention and show your check valves and/or flame busters. Very important as you essentially have two pressurized bombs at the other end of your hoses.
Watch all your videos! They are great! Haven’t been commenting due to Firestick! Now have the google dongle due to their battle, but know I have learned a ton from you!
Very nice camera work. Helpful video. Thank mate.
Really liked the video. Was using one today at work and had forgotten about how to properly set one (been 15 years). Again thanks for making the video. BTW I didn't know about the oxygen vavle ! ★Open up all the way★
Great video with all the necessary information! Thanks.
This was a great video, I just started using this to cut off lips on buckets and welding new ones on. This gave me a lot of great info to use, I’m about to go try it right now!
I'm just starting . Thanks for the wonderful info.
Hey bud! Excellent video. Thanks so much for taking the time to share your knowledge. Take care!
Dude I just inherited a welder and cutting torch, never used them before.
Your going to help me learn to use this stuff.
Appreciate the tips. Also you are good at explaining human to human. Some people are assholes you seem like a good guy
Nice tutorial simple, very clear and infortmative
Really appreciate the display of the "feather" at the six minute mark. That was very helpful. Thank you.
Thank you for the video. Just got a set up today at a yard sale and looking forward to using it. 🤘
Great video dude! I had never used a cutting torch before. I started working a job where I cut 3/8 to an inch. Helped a lot!
Thanks I needed this! Sir, I truly like the way you teach.
First of all thanks for the video, good information for people just starting. Maybe you could continue a series on useful torch tips and tricks that are useful on the job. I was so lucky to learn from guys like you in the early eighties in Houston. It was rough but I learned a lot from those guys. Anyway stay safe. I always got a kick when a welder started dancing when a piece of slag went down his shirt, until it happened to me,ha ha.
+elpasokid 53 Thanks. I think I will do a video that has more depth on the torch I need to learn how to braze before that though.
Thank you my friend good advice and helpful tips good job on explaining, have a nice one...👍
nice video. I was taught to cut the oxygen first and then acetalyne on all torches. not just rose buds. nice work!
Thanks very much for the free lesson, much appreciated indeed and good luck always
Great video. Thanks for taking the time to share your experience.
Excellent video. You might mention to never lay an acetylene tank on it's side, or if you do make sure it is upright for a couple hours before you use it. You will wreck your gear just like having more than 15 psi of pressure at the gauge.
That's because it has liquid acetone in it. And that will foul the regulator. Very dangerous. It's best to wait an hour like you said.
Very smart Man who knows his trade. Highly intelligent to the degree of being able to convey his knowledge to tenderfoots making a complicated and dangerous system seem like childs play. As you know, common sense isn't all that common out there my friend! Hahaha. Returning to the basics ALWAYS forces the betterment of any task. Fully enjoyed this video. Love and appreciation from Long Island New York. Kind regards, Mickey
Good instruction video on using the torch and safety tips ...I was lucky to be able to be around a torch when I was a kid and learned a lot ..I once worked for a company that had me cutting 16 in tall I-beams all day and the boss thought I was certified Because he liked my work ..But I had used a torch and practiced over the years to get good at using it... My favorite thing is to braze I would like to learn how to torch weld better with steel rod I have only done it once
+not2fast4u2c Thank you. Very cool aye that is one thing I don't know how to do at all is gas weld. I've seen it done, but not in person. Might have to give it a try.
+Classic Work Brazing and gas welding are not that hard,it is mostly in technique. When I was working at a tourist railroad, i went to night school to learn to weld. I took my practice coupons to work and my boss said they were really good. It was easier than electric welding. I was working on a project at class using rail and the instructor didn't think I would be able to torch cut the rail but I did with a result almost like yours on the plate.
An iron worker showed us helpful trick is to lean the flame toward the direction the cut is going so the metal is heated ahead of the cutting flame. This helps make a nicer cut.
I learned to braze when I worked for Trane brazing copper to copper, copper to brass, and copper to steel. We used a double tip torch with oxygen and natural gas. I have made around 1600 connections in an 8 hour shift; sometimes with no leaks.
+Roy Reynolds Very nice that is really cool to hear. I took welding for 2 years, and we never touched a brazing rod. I know it is very useful, and can do things that arc welding can't touch. I know what you mean I know on cutting really thick plate its a good idea to make a bigger kerf so the metal has somewhere to go instead of sticking to the rest of the plate. Thanks for the comment.
Brazing probably is the best way to repair cast iron breaks.
I have never tried this but understand if a bolt is broken off in cast iron it can be "blown out" by starting to cut the bolt like cutting then turn off the gas and just using the oxygen to remove the steel will leave the threads in the cast iron untouched. Maybe just chase them with a tap to make sure all slag is out.
+Roy Reynolds I've seen my dad fix exhaust manifold breaks with a brazing rod more than a few times. I could see how that would work cast iron has a higher melting temperature than steel plus oxygen does not cut cast iron due to all the graphite in it. I may have to try that one. Thanks man.
having been a welder certified since the early 70's ,,,,, the rule of thumb for us was 8 lbs ace, and 40 oxy .. of course you change as you need to for thickness and so forth . 3 types of flames is involed in welding witch are NEUTRAL , CARBURIZING , OXYDIZING .FLAMES . nice vid ....enjoy
Same here started in 1975.
Very helpful video for beginners like us!
Awesome job! To the point and understandable. Thank you for taking the time to enlighten me.