C8 Corvette brake bleeding procedures

how to bleed C8 Corvette brakes what tools you need and what you need to know.
**Don't attempt to bleed or flush the brakes with out theses tools**
You will get a level 1 or level 2 brake system failure and will have to tow the car to dealer or someone with proper tooling to correct this issue.
tools I used :
J-2534 scan tool/Programmer or factory GDS GM tool
www.drewtech.c...
link to purchase Gm software subscription www.acdelcotds...
brake pressure bleeder kit
www.amazon.com...

[@mhonella]

Thank you for this informative video, and you are correct that there is an information vacuum about this online. I was going to swap out my calipers (from black to yellow) on my 23 C8 using the usual brake bleeding procedures. You have saved me from making the serious mistake of trying to do this without the exact tools.

[@dcdanger6151]

This video will save a lot of tow jobs to the dealership. If you don't have the proper equipment don't even try it.

[@Z06norway]

To clear the brake codes, push the start button without stepping on the brake petal to power up the car. Do not start the engine. Then press firmly down on the brake pedal for 20-30 seconds. You will hear clicking noise during this process. When the clicking stops you can start the car and the brakes will be reset , the codes cleared and warning lights gone.

[@lanebarker297]

This vid just made a lot of Z51 brake swaps WORTHLESS.... THANKS for the heads up.

[@ronaldbays4005]

My GM service team changed the fluid and after a track day went to limp mode. They changed the entire brake booster system and programmed it and 2 days later same problem. Now GM is saying it’s because I have girodisc rotors and carbotech pads and I gave to put OEM parts back on. What have they done wrong?

[@garyrude2584]

so which software on tds do you need? tech2 win or light duty global diag (gds2)?

[@bashmor1001]

Hi I just want to bring my c8 to change brake fluid what's the address or phone number I'm an dallas Fort Worth