Sir does both the rotation and translational velocities of rear inner and outer wheels same or different? And what about the angular velocities of both rear wheels about the Instantaneous center of rotation? Are they same?
I recently tried to design a go-kart ackermann steering.However, why is it that there's only one pair of certain angles for both the inner and outer angle that produces a common point between the extended lines parallel to the rear axle and also the perpendicular lines from both the front tires? Is this a natural behavior or should there always be a common point for all the turning angles of the front wheels? Thank you
Sir, what will b the difference in angles, between the inner n outer wheels, at the extreme point. Will it be less than 5 degrees or more. It may not b standard. Please tell approximately
it depends on so many things like the distance between the wheels, the max steering angle of the specific car, the radius of the turn so there really is no correct answer, it is pretty easy to calculate with basic trigonometry u just have to pick a turning radius and distance between the two front wheels and u can do it with pen paper and calculator
which of the following wheel of a four wheeler follows longest radius of curvature on a curved road a. inner rear wheel b. inner front wheel c. outer front wheel d. outer rear wheel
Depends how u wanna use your car if your trying to drift then it's probably better to not use it cause it can make inconsistency in your speed when in a corner which will probably spin u out
Every time I see an explanation of Ackermann, the drawing of the vehicle is using REAR STEER. What about front steer? How do we design the correct Ackermann for front steering?? Preferably with Rack & Pinion...
Well explained,And it's better to check up 2:15 Alto for engine oil leakages if any..
This very well demonstrated. I've watched a few videos explaining Ackerman angle and this one by far makes it easier to understand
Maybe you need to look up more. This videos lacks a lot of details
Mikasa Ackerman
Thank you. This knowledge you shared motivates many to look deeper into this topic.
Thank you for your feedback. You made our day! We look forward to continuing to serve you well :)
Sir how should we consider a length between two axils for designing vehicle?
Sir does both the rotation and translational velocities of rear inner and outer wheels same or different? And what about the angular velocities of both rear wheels about the Instantaneous center of rotation? Are they same?
I recently tried to design a go-kart ackermann steering.However, why is it that there's only one pair of certain angles for both the inner and outer angle that produces a common point between the extended lines parallel to the rear axle and also the perpendicular lines from both the front tires? Is this a natural behavior or should there always be a common point for all the turning angles of the front wheels? Thank you
If the vehicle is front wheel drive which it is normally how do the steering mechanism work in cohesion with torque coming through the engine ?
What is meaning of blurring number plate after 😂
TN-20-BV-6813 🤣
KENNNYYYYY!!!!!
how can we change translation velocity vector direction collinear with rotational
So the ackerman degree bigger is better for racing car?
Want to design a whole streering system what to do I mean help me fro that
I need Devi's steering gear mechanism also
Pls provide link
Sir, what will b the difference in angles, between the inner n outer wheels, at the extreme point. Will it be less than 5 degrees or more. It may not b standard. Please tell approximately
it depends on so many things like the distance between the wheels, the max steering angle of the specific car, the radius of the turn so there really is no correct answer, it is pretty easy to calculate with basic trigonometry u just have to pick a turning radius and distance between the two front wheels and u can do it with pen paper and calculator
which of the following wheel of a four wheeler follows longest radius of curvature on a curved road
a. inner rear wheel
b. inner front wheel
c. outer front wheel
d. outer rear wheel
Outer front, followed by outer rear, inner front then inner rear
How can we change translation velocity
What are the angle of bell crank lever .
Is it necessary to use differential in rear wheel
Depends how u wanna use your car if your trying to drift then it's probably better to not use it cause it can make inconsistency in your speed when in a corner which will probably spin u out
You have fluent english skills sir.
How it's come under turning pair
Every time I see an explanation of Ackermann, the drawing of the vehicle is using REAR STEER. What about front steer? How do we design the correct Ackermann for front steering?? Preferably with Rack & Pinion...
Oi Ackerman
What is pivot means
Hey Naveen, A pivot is the point about which the mechanism turns. This term applies generally as well
I came here for levi ackerman
Eti Boys
Eti
Mikasa Ackerman