3D print file will be avaliable for free soon on my thingiverse, i am still working on an instruction booklet, please be patient and thanks for your intrest! my thingiverse: www.thingiverse.com/crcg_yt/designs
Nice work on the chassis 👍🏻 Did you get your inspiration from the Ventru sporty? If you clock your C hubs back a notch you'll get a smoother, sharper steering. D440 has a print file to mount the servo behind the axle. I'm sure you could modify it to suit your needs.
Yes, I saw a ventru and really liked the design and thought I'd try to create a simpler version with more off the shelf parts. The servo mount was also inspired by D440 but since I'm printing in PLA I didn't really trust it as the actual mount, so its actually a truss that a VP ar60 servo mount bolts onto and the truss also integrates a battery tray and link riser
I'll be honest my understanding of link geometry is pretty basic, however through trial and error, by raising the rear upper links up it seems to help with keeping the front end down on steep climbs. Also it give a bit more Clearance to the rear upper links. Hope this helps
3D print file will be avaliable for free soon on my thingiverse, i am still working on an instruction booklet, please be patient and thanks for your intrest!
my thingiverse:
www.thingiverse.com/crcg_yt/designs
I don't see the chassis in your thingiverse
@@nathan3856hi did find it I can’t see it
any update to this? Can the files be purchased somewhere else?
Awesome! That's the most forward weight bias crawler I've ever seen. Excellent break over clearance too! Waiting for the STL files on Thingiverse!
" almost all parts except the axle, links and drive train are 3D printed out of eSun PLA plus." what a legend
Super cool dude!!!!
Nice work on the chassis 👍🏻 Did you get your inspiration from the Ventru sporty?
If you clock your C hubs back a notch you'll get a smoother, sharper steering.
D440 has a print file to mount the servo behind the axle. I'm sure you could modify it to suit your needs.
Yes, I saw a ventru and really liked the design and thought I'd try to create a simpler version with more off the shelf parts.
The servo mount was also inspired by D440 but since I'm printing in PLA I didn't really trust it as the actual mount, so its actually a truss that a VP ar60 servo mount bolts onto and the truss also integrates a battery tray and link riser
Interesting the way the links mount on this, the top links are all very high up, is this mostly to raise the roll center?
I'll be honest my understanding of link geometry is pretty basic, however through trial and error, by raising the rear upper links up it seems to help with keeping the front end down on steep climbs. Also it give a bit more Clearance to the rear upper links. Hope this helps
Check out Anti-Squat and Anti-Dive.
Any idea when this will be released😎😅🥹
Very Cool video and Rig👍 But I see a lot of people there on the rocks and only 1 Rig. R u the only one there in the video with a Rig?
Yes, I was the only one unfortunately
😍🤩💥💯👍👏
When are you releasing the files?
What transmision are you using?
This is awesome please send me the build parts list and the STL files
Thanks for the interest, it's still a work in progress, I'll upload it to thingiverse when it's ready
@@CRCG_00 how to search it in Thingiverse later? What is your username? Thanks.
그래도 뚜껑은 씌우고 차모양은해서 테스트해야 좀 제대로 어떤지 알수있지않을까요?
Buena maquina me gusta 😍
Is the file available for this chassis?
hello, congratulations for this work
which axles have you used ?
Thanks! this is based off of the axial ar60 axles. I've got axial OD and UD gears, axial universals and VP lockers in them.
@@CRCG_00 thanks for your response but I dont understand Vp lockers 🙄
Vanquish Products spool:
www.vanquishproducts.com/incision-spool-locker/
@@CRCG_00 thanks