You are a rare breed repairman that actually repairs circuit boards rather than just tossing them out. I didn't think any guys were left that did that.
Thanks for this video, Hameed. We had the exact same issue with our Kenmore oven and after viewing your video, I fixed it in about 10 minutes. The hardest part was finding my soldering iron. Thanks for sharing your knowledge!
Thank you so much for this video. Our range would not heat up just 1 week before Christmas. I came across your video and this was the exact problem with our range. After a very quick re-solder of the circuit board and everything works perfectly. Your video saved us thousands by not having to get a new range just before Christmas. Thank you so much!!!!!!
Thank you so much for this video. Our range would not heat up just 2 days before Christmas. I came across your video and this was the exact problem with our range. After a pulling the back off of the over I found the problem just as you said. I re-soldered the circuit board and everything works perfectly. Your video saved us thousands by not having to get a new range just before Christmas. Thank you so much!!!!!!
Thank you very much.. I have the same oven that would not heat up. I pulled the circuit board and that was the problem. Quick easy fix to save hundreds of dollars. I sure do appreciate you sharing this repair.
Great video, highly appreciated! I recently learned how to use a soldering iron, and I live in a remote place... No appliance repair shops here at all, and deeply snowed in. After our oven stopped going past 100 a few days ago, I found your video and suggested fix. You showed me exactly what to look for, what to do, and the fix worked perfectly. (Big ol' burn mark on that same spot on our board, also.)
Real technician bro ..power to you..i just bought a solder kit but haven't attempted any repairs in the feild i will first practice...board are so expensive now and discontinued i feel useless sending them to buy new units...less than 5% of Appliance tech solder ANYTHING to a board.. now days less than 40% do sealed system...but electrical solder..no1
Hello Sir. I have the kenmore 970-660230 induction and same thing would not go past 100. I've never soldered or fixed boards but watched this vid and mimicked your moves and my oven is now working. the burn was in the exact same place you indicated and happened to have wire brush and green pad and soldering iron that I planned to learn some day. Just want to say thank you so much, it is very generous of you so do this for the public, its easy to see this is planned obsolescence by the manufactures specifications that this would happen and may have cost me 500$ CAD to fix. Ill be sending you a little something soon in appreciation. Thank you.
I m glad you are smart and took your time to work on it and fix it . A lot of people gave up and buy new one . It’s a fairly easy repair if someone has a little bet of soldering knowledge and is a handy person ✌️ Thank you!
Extremely helpful video. Glad you shared it. Saved me a lot on a service call and new circuit board. I had the exact same problem. I guessed it was something other than the power supply since the stove top works fine. And it probably wasn't bad heating elements since both weren't heating. I checked the control board and right away saw the bad solder on the pin. Easy fix for anyone that can solder. Thanks for the helpful tips about the locking tabs (mine had small pins in the center that had to be removed with needle nose pliers 1st) and being careful to make sure the 18 pins line up when putting back in place. I am guessing the 100 degrees that shows on the panel is just a minimum temp reading since in actuality it did not heat at all and was at room temp.
I have a Kenmore Elite 790.7850 and this was the exact reason why my oven would not get over 100deg. Cracked solder joint.on the relay daughter board. I had already bought new heating elements before watching this too.
I don’t think I ever had such a small amount of solider save me so much money. Stove wouldn’t heat 100% and it appeared both broil and bake elements wouldn’t heat, so I knew something other was up. Seen this video and knew this had to be the issue. 15minutes later had the stove working. Looks like you have to get shoulder across three pads.
Great videos! I will check the circuit board for any burnt patches thanks. I have a kenmore 970-615234 and google has failed me to find a User Manual. Is it possible the electric oven doesn't have a thermal fuse? Oven element doesn't have continuity, but broil does. But when I turn the broil on, barely any heat comes out.
@@dirtyhands416 I do not think this unit has thermal fuse ,but I would still double check to see if it has , if your bake element has no continuity it should be replaced and if broil is also not working there is a good chance your main control board relay is bad ✌️
You are a rare breed repairman that actually repairs circuit boards rather than just tossing them out. I didn't think any guys were left that did that.
People are hoping to get their appliances fixed when they call for service and I always try my best to take care of them 😁 Thank you!!
Thanks for this video, Hameed. We had the exact same issue with our Kenmore oven and after viewing your video, I fixed it in about 10 minutes. The hardest part was finding my soldering iron. Thanks for sharing your knowledge!
Thank you so much for this video. Our range would not heat up just 1 week before Christmas. I came across your video and this was the exact problem with our range. After a very quick re-solder of the circuit board and everything works perfectly. Your video saved us thousands by not having to get a new range just before Christmas. Thank you so much!!!!!!
Thank you so much for this video. Our range would not heat up just 2 days before Christmas. I came across your video and this was the exact problem with our range. After a pulling the back off of the over I found the problem just as you said. I re-soldered the circuit board and everything works perfectly. Your video saved us thousands by not having to get a new range just before Christmas. Thank you so much!!!!!!
That tiny bit of solder saved me from buying a new oven (about $1000), all the best to you!!!
I get super happy people fixing their appliances by my videos. Thank you for your feedback ✌️
Thank you very much.. I have the same oven that would not heat up. I pulled the circuit board and that was the problem. Quick easy fix to save hundreds of dollars. I sure do appreciate you sharing this repair.
Great video, highly appreciated! I recently learned how to use a soldering iron, and I live in a remote place... No appliance repair shops here at all, and deeply snowed in. After our oven stopped going past 100 a few days ago, I found your video and suggested fix. You showed me exactly what to look for, what to do, and the fix worked perfectly. (Big ol' burn mark on that same spot on our board, also.)
I m glad I could help ✌️
Great fix that could save several hundred dollars and ship time for a replacement part. Thanks!
Real technician bro ..power to you..i just bought a solder kit but haven't attempted any repairs in the feild i will first practice...board are so expensive now and discontinued i feel useless sending them to buy new units...less than 5% of Appliance tech solder ANYTHING to a board.. now days less than 40% do sealed system...but electrical solder..no1
Hello Sir. I have the kenmore 970-660230 induction and same thing would not go past 100. I've never soldered or fixed boards but watched this vid and mimicked your moves and my oven is now working. the burn was in the exact same place you indicated and happened to have wire brush and green pad and soldering iron that I planned to learn some day. Just want to say thank you so much, it is very generous of you so do this for the public, its easy to see this is planned obsolescence by the manufactures specifications that this would happen and may have cost me 500$ CAD to fix. Ill be sending you a little something soon in appreciation. Thank you.
I m glad you are smart and took your time to work on it and fix it . A lot of people gave up and buy new one . It’s a fairly easy repair if someone has a little bet of soldering knowledge and is a handy person ✌️
Thank you!
Extremely helpful video. Glad you shared it. Saved me a lot on a service call and new circuit board. I had the exact same problem. I guessed it was something other than the power supply since the stove top works fine. And it probably wasn't bad heating elements since both weren't heating. I checked the control board and right away saw the bad solder on the pin. Easy fix for anyone that can solder. Thanks for the helpful tips about the locking tabs (mine had small pins in the center that had to be removed with needle nose pliers 1st) and being careful to make sure the 18 pins line up when putting back in place. I am guessing the 100 degrees that shows on the panel is just a minimum temp reading since in actuality it did not heat at all and was at room temp.
I m glad it was helpful!
Thank you. Hameed, a very informative video. Followed your thorough instructions, and my oven now works.
That’s awesome 😁
❤ my oven has exact problem, now follow your video I fixed it. Thank you very much
@@ShawnLee-channel Good job Shawn✌️
I have a Kenmore Elite 790.7850 and this was the exact reason why my oven would not get over 100deg. Cracked solder joint.on the relay daughter board. I had already bought new heating elements before watching this too.
I m glad you know it before ordering new board ✌️
Great job brother,I did 1 same thing I hope it work.5 star rating
Yeh
Well done!
I don’t think I ever had such a small amount of solider save me so much money. Stove wouldn’t heat 100% and it appeared both broil and bake elements wouldn’t heat, so I knew something other was up. Seen this video and knew this had to be the issue. 15minutes later had the stove working. Looks like you have to get shoulder across three pads.
Great videos! I will check the circuit board for any burnt patches thanks. I have a kenmore 970-615234 and google has failed me to find a User Manual. Is it possible the electric oven doesn't have a thermal fuse? Oven element doesn't have continuity, but broil does. But when I turn the broil on, barely any heat comes out.
@@dirtyhands416 I do not think this unit has thermal fuse ,but I would still double check to see if it has , if your bake element has no continuity it should be replaced and if broil is also not working there is a good chance your main control board relay is bad ✌️
Hi Hameed, by chance do you work in Ontario?
Hi , unfortunately not but my brother does his name is Anil Wafa . Give him a call (647) 510-5668
how long does it take for the oven to heat up afterwards
Great Job!
Thank you!
good job
only 7 years old xd, you're pretty lucky now they last like 4 years haha
Outstanding
Bravo!