Found this six days after opening my Phantom 2 and trying everyday/all day to find info about connecting new NDJ6 controller to flight deck. THANK YOU for this. ;-). Absolutely fantastic.
how you fix it The LED on controler turn yellow all the time after update assistant software Phantom and Rc software calibrate but the controler still yellow and can not power the phantom but tilt the gimbal work ok .thank you
Hello there does it have the be the dji transmitter or would any transmitter bind with it thinking cheerson cx20 transmiter to bind with dji phantom 1 naza ???
Can you help Simon, I have a solid red light on the camera LED indicator and the camera app can't connect. I tried to rebind but it didn't fix the problem. Do you have any ideas what I can do next?
I need to replace my camera after a crash, is this all I have to do? do I use the MAC address from the drone do I need a MAC address from the new camera. thanks in advance if you know the answer.
Hi, my issue is the opposite, I broke the main drone unit but have another Phantom 3 Standard. Is it possible to bind the remote from the broken Phantom 3 to another working Phantom 3?
Good morning Mr. Simon! Since I'm having such horrible problems getting my transmitter that came with my X525 build to operate correctly, I'm curious, can I bind my dji transmitter to a different receiver?? My X525 is using the KK2.2.5 board and a flysky receiver. Or should I just purchase a "quad copter" transmitter and receiver to fly my X525 and my phantom and do away with my dji transmitter??
Hello Simon, Trying to turn the remote on. 1st turned on booster waited till both greens came on. Than attempted to switch power to controller, starts green, and than turns red with a high pitch beep about 1/2 second apart. What is happening, and how do I get it back to green so I can fly? In advance, Thank you very much! John Phantom 2 controller with new Duracell bateries
Hi. Can i use a specific controller that came with a 'rtf' drone and use it for another drone ? I have a Polaroid Mirage 6 (2.4Ghz) and i'd like to use the remote controller for a Blade Inductrix 'BNF'. Is it possible ?
Good afternoon .. nice video just a quick question I bought 2 DJI Phantom 2s one is a Phantom 2 Vision the other is not. Also one of the controllers is the upgraded rechargeable and the other is batteries however neither of them will connect to the aircraft as it continues to Blink after pressing and turning on controller any idea why?
My FPV is not working on my Phanton 2 Vision, ( NOT THE PLUS, JUST VISION) Everything else works, battery level indicator , altitude I am even able to take pics and videos. What can I do to fix, PLEASE HELP and thank you in advance
I have a general question. If I want to make my own drone, can I buy a cheap drone and use its transmitter? If yes do you have any video for teaching that?
Problem you may be able to help me with. When trying to connect my phantom 3 standard. Device says connected, no internet. This has driven me crazy. Any help will be greatly appreciated.
I have an issue with binding and would like to know if you can tell how to ascertain what may be causing a problem? Transmitter (RC) or Receiver (bird). Thanks much! -F
***** It is not binding between the rc and bird. I suspect a faulty part but not sur which unit. Can you answer me this. When in the P2 assistant, do the positions all show green? as one of mine the T stick is showing black and I am wondering if that indicates a fault with one of the servos or links for a specific module? Thanks very much for your reply,-Fred
***** I did all that. There is no movement in the P2 assistant window but the RC assist shows movement. I did a hard recal there is no error number showing in the pop up window which indicates the cfg err. Where is the number supposed to be? Thanks!
***** I received it unbound from another who had this issue I am trying to repair. Rebinding doesn't work. the cfg-err message says to do things which I have done. I believe there is a trasnsmitter hardware prob or receiver hardware prob but need to know how to ascertain which. Thanks! (in the assistant the control stick has t -1000 and is black. the rest are green and neutral)
My Vision+ binds perfectly with my original controller, but does not detect the new controller and will not bind to it. I notice that my original controller beeps twice when I turn it on, whereas the new one beeps three times. Is there any significance to that difference?
***** No, I haven't changed it to FCC mode. I'm thinking of ordering another unit to see if that solves the problem. (And many thanks for the videos, all very helpful.)
Ooops, sorry, but I now realize that I ordered a controller for Phantom 2, not realizing that my Phantom 2+ requires a different controller. My bad. Thanks again for your replies; keep those great videos coming!
Hello Simon, I hope you can help me! I need to bind my DJI Phantom 2 Vision Plus to another transmitter. I can't get past the binding button. I'll push and hold it then release and it blinks red for maybe 2 seconds and never changes to orange. It just goes back to red? Thank you in advance! Thomas
Hey Simmon, I tried holding the button longer but got the same results. Any more suggestions? I don't know any thing else to try? I appreciate your help! Thanks again, Thomas
Good Morning Simon: (or evening): Great Video. I wondered how you would bind a new transmitter to the Vision Plus, since I'm gonna get a new transmitter shortly for my vision. I looked under the DJI Site and apparently they only have one explanation to binding and it appears to be for older Phantom Models, where you have to remove the top to get to the receiver. It does not show the sequence you used. These are just small things, but DJI needs to keep on top of their modifications and update or add to their instructions, to keep all the customers informed. Although, I think DJI depends on people like you to inform consumers about these changes. A BIG THANK YOU! Take Care my Friend!
Can someone please help, everytime i turn on the transmitter the power light turns orange after it flashes green. I dont know why this is happeneing and it wont connect to the drone
Hi Simon, I just purchased the Phantom 2 vision plus V2. It comes with the old remote without gimbal dial. I have the new remote with the gimbal dial for my old drone. My old drone is at the bottom of a lake. I tried this and nothing happens. The light turns orange but once I turn on the controller nothing changes. Do I have to unbind the controller from the lost drone so I can bind it with the new drone. If so how do I unbind the controller? Thank you
+Simon Newton it was phantom 2 but I'm not sure which version because I bought it online used and didn't know much about it. It came with the gimbal for GoPro. Also came with the newer controller with gimbal tilt on top left and the rechargeable battery.
What about repeater? You can use any vision plus repeater now, can't you? Also, can you use 2 controllers with the same aircraft? Like, make it remember the old transmitter also in case u decide to use it. Was wondering if I could bind my extra controller to the vision plus so when I don't want to fly ling distances, I don't have to have the bulky setup. Table is looking too clean by the way lol
Nice! Thanks for the help! - i got super lucky & recovered a lost drone on a laboratory roof a while back, aim to get it working & back in the air so i can conduct archeological research!
Would love a easy walk through on binding the vision fc200 camera as iv given up on it. I bought a fc40 camera as a stop gap till I can figure out were im going wrong with it. Keep up the great work :)
Simon, I see on your old Transmitter you used for demo purposes you had the 5db antenna mod on the wifi module. My question is, does this really help? I have been having a lot of issues lately with "broken connection" issues. Saw that mod on youtube and may give it a go if it is a worthwhile endeavor.
Thank you!! I've been trying for hours to figure out why I couldn't connect. Finally did an online search and was directed to this video. Problem solved immediately!! You are drinking wine so I decided to go ahead and pour myself a bourbon. Thanks again.
Good info here, I crashed my Vision 2 sometime ago and killed my camera. Replaced it and didn't realize I had to re bind things. I had to get DJI to re assign a new QR Code for the new camera. Or at least I think that's what had to happen all I do know is my original camera and the quad didn't work with the new camera.
***** Yeah sorry about that Simon it was early in the morning and I guess my reply was quite confusing. Yes you are right and I am looking forward to your video on this I had a very hard time figuring things out when I got the new camera.. Thank god for You Tube & Forums and of course for "On The Kitchen Table" :)
The transmitters are exactly the same. don't waste your time or money. I posted this earlier and i was wrong. I meant to say receiver, so my opinion does not pertain to this video at all. I apologize for that.
***** Wait what? Im actually talking about the receiver in the phantom. Part #16. I heard DJI released an "upgraded" version of the receiver which is part #11. These two receivers are identical. Please correct me if im worng and tell me how because my shop tested them both and there is no difference between the two receivers.
***** I totally agree. I meant to say receiver. I made a mistake. My comment doesnt belong here for this video. But since i have your attention and im rather confused, DJI has made a new 5.8ghz receiver for inside the phantom 2 vision +. There is part number #16 for phantom 2 vision and now as of late they are selling part #11 for phantom 2 vision + which to me they are exactly the same except for the price. Do you have any knowledge if they are somehow different? I sell modified receivers (part #16) and its causing problems for my business. Thank you in advance for any help you can give.
***** Thank you so much for checking. We even tested it out in the field with 2 Phantoms. One with the "new" receiver and one with the "old" receiver. There was not noticeable difference between the two at all. Visually they are identical. I just thought someone knew something about it that i didnt. If true, its kinda of crappy they would do that and then charge 10.00 extra for it.
Found this six days after opening my Phantom 2 and trying everyday/all day to find info about connecting new NDJ6 controller to flight deck. THANK YOU for this. ;-). Absolutely fantastic.
Mate, I have been searching the internet for this for 5 hours! thank you so much ❤️
how you fix it The LED on controler turn yellow all the time after update assistant software Phantom and Rc software calibrate but the controler still yellow and can not power the phantom but tilt the gimbal work ok .thank you
I have the model number of the Phantom. Control of the Pv330 is lost, can I program another in the same way
Hello there does it have the be the dji transmitter or would any transmitter bind with it thinking cheerson cx20 transmiter to bind with dji phantom 1 naza ???
OMG, so many questions answered! Thanks a lot! Please keep up doing what you're doing! It's a pleasure to watch! :)
Can you help Simon, I have a solid red light on the camera LED indicator and the camera app can't connect. I tried to rebind but it didn't fix the problem. Do you have any ideas what I can do next?
I need to replace my camera after a crash, is this all I have to do? do I use the MAC address from the drone do I need a MAC address from the new camera. thanks in advance if you know the answer.
Hi, my issue is the opposite, I broke the main drone unit but have another Phantom 3 Standard. Is it possible to bind the remote from the broken Phantom 3 to another working Phantom 3?
me too, same issue
Were you able to find solution for your problem?
ReizePrimus should work all the same with any RC controller/vehicle!
The last Firmware update unbounded my transmitter... Thanks!
I finally found a decent video on this subject.Thank you.
Good morning Mr. Simon! Since I'm having such horrible problems getting my transmitter that came with my X525 build to operate correctly, I'm curious, can I bind my dji transmitter to a different receiver?? My X525 is using the KK2.2.5 board and a flysky receiver. Or should I just purchase a "quad copter" transmitter and receiver to fly my X525 and my phantom and do away with my dji transmitter??
I absolutely love all the b.s.
But how to do for dji standard??? I want to changed to a new remote well I do same
Thanks guy, short and to the point
You rock and love the choices of bev's
Take care, Fly High, Fly safe...
Hello Simon,
Trying to turn the remote on. 1st turned on booster waited till both greens came on.
Than attempted to switch power to controller, starts green, and than turns red with a high pitch beep about 1/2 second apart. What is happening, and how do I get it back to green so I can fly? In advance, Thank you very much! John
Phantom 2 controller with new Duracell bateries
Hi. Can i use a specific controller that came with a 'rtf' drone and use it for another drone ? I have a Polaroid Mirage 6 (2.4Ghz) and i'd like to use the remote controller for a Blade Inductrix 'BNF'. Is it possible ?
Good afternoon .. nice video just a quick question I bought 2 DJI Phantom 2s one is a Phantom 2 Vision the other is not. Also one of the controllers is the upgraded rechargeable and the other is batteries however neither of them will connect to the aircraft as it continues to Blink after pressing and turning on controller any idea why?
Hi I’ve connected it but the camera won’t move up and down when I move the wheel any suggestions??
can I use this vision 2+ controller on my phantom 3 standard? they are both 5.8ghz
My FPV is not working on my Phanton 2 Vision, ( NOT THE PLUS, JUST VISION) Everything else works, battery level indicator , altitude I am even able to take pics and videos. What can I do to fix, PLEASE HELP and thank you in advance
I have a general question. If I want to make my own drone, can I buy a cheap drone and use its transmitter? If yes do you have any video for teaching that?
Problem you may be able to help me with. When trying to connect my phantom 3 standard. Device says connected, no internet. This has driven me crazy. Any help will be greatly appreciated.
Hi, would you happen to know the model number for the original motors used in the Phantom 2 plus
Thanks
Hello how fix the camera issued? Its still black screen.
I have a second hand p2v and don't have the qr code. How could I do this now?
I have an issue with binding and would like to know if you can tell how to ascertain what may be causing a problem? Transmitter (RC) or Receiver (bird). Thanks much! -F
***** It is not binding between the rc and bird. I suspect a faulty part but not sur which unit. Can you answer me this. When in the P2 assistant, do the positions all show green? as one of mine the T stick is showing black and I am wondering if that indicates a fault with one of the servos or links for a specific module? Thanks very much for your reply,-Fred
***** (I am getting a cfg error)
***** I did all that. There is no movement in the P2 assistant window but the RC assist shows movement. I did a hard recal there is no error number showing in the pop up window which indicates the cfg err. Where is the number supposed to be? Thanks!
***** I received it unbound from another who had this issue I am trying to repair. Rebinding doesn't work. the cfg-err message says to do things which I have done. I believe there is a trasnsmitter hardware prob or receiver hardware prob but need to know how to ascertain which. Thanks! (in the assistant the control stick has t -1000 and is black. the rest are green and neutral)
My Vision+ binds perfectly with my original controller, but does not detect the new controller and will not bind to it. I notice that my original controller beeps twice when I turn it on, whereas the new one beeps three times. Is there any significance to that difference?
***** No, I haven't changed it to FCC mode. I'm thinking of ordering another unit to see if that solves the problem. (And many thanks for the videos, all very helpful.)
Ooops, sorry, but I now realize that I ordered a controller for Phantom 2, not realizing that my Phantom 2+ requires a different controller. My bad. Thanks again for your replies; keep those great videos coming!
Hi Simon!
Great Video. My question is will this "NEW" DJI transmitter work with my 5.8ghz Phantom 2 vision? It IS NOT the + Phantom 2/
Thank you, Simon!
Hello Simon,
I hope you can help me! I need to bind my DJI Phantom 2 Vision Plus to another transmitter. I can't get past the binding button. I'll push and hold it then release and it blinks red for maybe 2 seconds and never changes to orange. It just goes back to red? Thank you in advance! Thomas
Hey Simmon, I tried holding the button longer but got the same results. Any more suggestions? I don't know any thing else to try? I appreciate your help! Thanks again, Thomas
***** Ok, Thank you. I'll just keep researching. I wanted to let you know that I enjoy your videos.
Good Morning Simon: (or evening):
Great Video.
I wondered how you would bind a new transmitter to the Vision Plus, since I'm gonna get a new transmitter shortly for my vision.
I looked under the DJI Site and apparently they only have one explanation to binding and it appears to be for older Phantom Models, where you have to remove the top to get to the receiver. It does not show the sequence you used.
These are just small things, but DJI needs to keep on top of their modifications and update or add to their instructions, to keep all the customers informed. Although, I think DJI depends on people like you to inform consumers about these changes. A BIG THANK YOU!
Take Care my Friend!
Bom vídeo ! Sabe como resolve a famosa tela preta do P2 vision plus ??
Can someone please help, everytime i turn on the transmitter the power light turns orange after it flashes green. I dont know why this is happeneing and it wont connect to the drone
Hi Simon, I just purchased the Phantom 2 vision plus V2. It comes with the old remote without gimbal dial. I have the new remote with the gimbal dial for my old drone. My old drone is at the bottom of a lake. I tried this and nothing happens. The light turns orange but once I turn on the controller nothing changes. Do I have to unbind the controller from the lost drone so I can bind it with the new drone. If so how do I unbind the controller? Thank you
+Simon Newton it was phantom 2 but I'm not sure which version because I bought it online used and didn't know much about it. It came with the gimbal for GoPro. Also came with the newer controller with gimbal tilt on top left and the rechargeable battery.
+Simon Newton oh ok thank you so much.
have problems with my remote , my throttle is on the right side instead of the left. called tech support no help at all. Need help
What about repeater? You can use any vision plus repeater now, can't you? Also, can you use 2 controllers with the same aircraft? Like, make it remember the old transmitter also in case u decide to use it. Was wondering if I could bind my extra controller to the vision plus so when I don't want to fly ling distances, I don't have to have the bulky setup. Table is looking too clean by the way lol
***** Lol. Definately a simon response with the yet in parenthesis. U will try anything haha.
Nice! Thanks for the help! - i got super lucky & recovered a lost drone on a laboratory roof a while back, aim to get it working & back in the air so i can conduct archeological research!
What happened to your p2 vision?
Would love a easy walk through on binding the vision fc200 camera as iv given up on it.
I bought a fc40 camera as a stop gap till I can figure out were im going wrong with it.
Keep up the great work :)
***** That's great news, look forward to it. :)
Was a easy to understand how to guide,
It confirmed my suspicion's that my fc200 is having wifi issues.
keep up the great work :)
i need help my drone keeps falling out because my controller keeps disconnecting.what do i do?
Simon, I see on your old Transmitter you used for demo purposes you had the 5db antenna mod on the wifi module. My question is, does this really help? I have been having a lot of issues lately with "broken connection" issues. Saw that mod on youtube and may give it a go if it is a worthwhile endeavor.
As always thanks...have a good Holiday !!
Thank you!! I've been trying for hours to figure out why I couldn't connect. Finally did an online search and was directed to this video. Problem solved immediately!! You are drinking wine so I decided to go ahead and pour myself a bourbon. Thanks again.
Perfect.thanks Simon
Good info here, I crashed my Vision 2 sometime ago and killed my camera. Replaced it and didn't realize I had to re bind things. I had to get DJI to re assign a new QR Code for the new camera. Or at least I think that's what had to happen all I do know is my original camera and the quad didn't work with the new camera.
***** Yeah sorry about that Simon it was early in the morning and I guess my reply was quite confusing. Yes you are right and I am looking forward to your video on this I had a very hard time figuring things out when I got the new camera.. Thank god for You Tube & Forums and of course for "On The Kitchen Table" :)
Me too Simon!
Thanks for the video! You have to try some Chilean wine!!!
I've yet to have either of them in the air and it's driving me bonkers because I've tried everything that I can think of
Love your shows! THank you for helping me out of a bind!!! Cheers!
I have tried this method million times with my phantom 2vision plus but no success!.
Thinking maybe you need to attend an AA ( Alcoholics Anonymous ) group in the future .!! lol.. ha haaaa
thank you..might just buy the new remote...
skip to 2:24 fort actual info
good
thanks mate
great, thanks. If you just want to find out where is the bloody button, skip to 2:50 :)
my controllers blinking green and wont bind
SAME!!!!
hey friend i lke wine waht name this salute
The transmitters are exactly the same. don't waste your time or money.
I posted this earlier and i was wrong. I meant to say receiver, so my opinion does not pertain to this video at all. I apologize for that.
***** Wait what? Im actually talking about the receiver in the phantom. Part #16. I heard DJI released an "upgraded" version of the receiver which is part #11. These two receivers are identical. Please correct me if im worng and tell me how because my shop tested them both and there is no difference between the two receivers.
***** I totally agree. I meant to say receiver. I made a mistake. My comment doesnt belong here for this video. But since i have your attention and im rather confused, DJI has made a new 5.8ghz receiver for inside the phantom 2 vision +. There is part number #16 for phantom 2 vision and now as of late they are selling part #11 for phantom 2 vision + which to me they are exactly the same except for the price. Do you have any knowledge if they are somehow different? I sell modified receivers (part #16) and its causing problems for my business. Thank you in advance for any help you can give.
***** Thank you so much for checking. We even tested it out in the field with 2 Phantoms. One with the "new" receiver and one with the "old" receiver. There was not noticeable difference between the two at all. Visually they are identical. I just thought someone knew something about it that i didnt. If true, its kinda of crappy they would do that and then charge 10.00 extra for it.
Hi Simon - sorry my phantom did not work like this I had to hold it down a second time, like this ruclips.net/video/jYic0Z6fZ8w/видео.html
For what reason Americans wind both before explaining what really matters? is love of his own voice?
+Simon Newton whatever! the announcer of this video is a flat rolled and without teaching
Fernando Filber wind?
oi like u rwine
Wine is for ladys. Be a man and drink Jack or Jim,