A friend went to a estate sale in the late '80's and purchased a tweed Fender Deluxe amp for a $1.90 bid, they didn't have any change left so it was 2 bucks. The auctioneer said, "Who'll give me a dollar for this old radio ? ". After I told him what it was worth, $700 at the time. he took his wife to all the auctions.
I had a friend here in Albuquerque that built beautiful guitars, he played with George Jones in the late 50s then ended up here, I told him I’d like a classical guitar,electric and thin. It came out so comfortable to play and played like a dream. His name was Jerry Starr. He and Donny Young changed their names while in New York to play the Jimmy Dean show, oh by the way, Donny Young changed his name to JOHNNY PAYCHECK.
I bought a 59 Les Paul in its original case owned by Jack Cassidy at a garage sale yesterday for 39 cents…..and she threw in a Sunn coliseum stack owned by Leslie west…. free. The lady who helped me was Morgan Fairchild….yeah…that’s the ticket…Morgan Fairchild.
@@Zero_Ego Sadly, it appears that Gibson (and several othe "big name" guitar factories) were quite happy, at certain periods, to cut corners and trade on their name! If an instrument feels and sounds good to you and you feel comfortable with it, that's probably the instrument for you;....irrespective of country of origin and the name on the headstock!!...............Unless youi are only buying it for "investment" purposes!
@@jedhatcher252 the earlier ones had wood bridges. I think in the early 60s is when Gibson started using plastic. The adjustable saddle bridges Gibson used were prone to splitting across the grain. Anyway a good luthier can do a replacement bridge on them and really help them out
My singer found a ‘73 Yairi 12string in her apt. dumpster and gave it to me. Was in wonderful shape. Just needed $350 worth of bridge work, new pins a new nut and set up. Case was trashed but I’ll take what I can get lol Never know
While helping a friend clean out her house after her husbands passing, I found a Gibson labeled case with a 12yr old J45, excellent condition and a wooden bridge. I can’t believe Gibson used plastic bridges back in the day as I remember looking at Doves and Hummingbirds around the early 60s. I can remember they’re being priced around $275.00. This one was free!
The bridge on Gibson flattop my father bought me new in 1964 pulled up about 10 years later. Luckily, the luthier my local guitar shop used was smart enough to scrap the horrible plastic bridge and make a walnut one that’s still in place nearly four decades later.
Hey thanks for the video of your work process. I go through a LOT of RUclips videos looking for Luthier work videos but if they don't have the dialogue that goes with the work I don't care much for them. I really enjoy watching the work process thought out aloud if you will :) So thanks for the great video!
Had that been at a Garage sale in my neighborhood, I'd have jumped on it too. Although I can do some basic instrument repair, I likely would have phoned my trusted luthier also. Mr. Rosa is certainly a trusted repair specialist.
I would have loved to have seen the customer’s reaction when seeing his “find” now. Great job on restoration… it is probably in better shape now than it was when new!
I would grind down the outside of the nut driver to make it fit in the pocket. They are usually pretty thick and can stand the loss of metal for a low torque application like that.
My favorite guitar is a old Silvertone guitar from the 60's. I got it from a lady who retired from being a guitar teacher. (About 30 years ago or so). It had a missing gear, but I paid her $10 and got one from a guitar repair shop. I have had to glue the saddle back on, but it still sounds so good.....an old classical guitar. I have about a dozen guitars, but that is still my favorite. Oldies but goodies.
One of mates is a Luthier he came across a garage sale guitar. Old beat up case (1930s P & O stickers on it) and someone had kindly put a polyurethane finish on it. He gave the guy 500 bucks telling him it was a great guitar once, but he didn't know what else he might find. It was a 1931 Martin OM-18 banjo tuners and all. It took him a long while to restore it as there were cracks and removing the poxy modern finish was a delicate job. But in the end it looked, played and sounded lovely. He sold it for around $5 000 AUS and figured he made about 2 grand. He later saw it in an exhibition when CF Martin IV was visiting Australia. This Gibson is much more of a rags to riches tale. Well done.
This whole series is a beautiful souvenir of your fine career for your family's enjoyment and for guitar enthusiasts everywhere for years to come. Good job Jerry Rosa
It's about 1:30 in the morning here This little corner of Louisiana. I couldn't sleep so I picked up my phone and I got to tell you I have really enjoyed your company this morning. I've been a novice guitar player for 60 years and I did not know so many things that you just showed about the guitar. Thank you for sharing that information in the manner in which you showed it. God bless you sir and many more years of Lutheran.
I got a 84, fender squire made in Japan, and signed by Robert Cray, and was played on the air live, back and given to on of the engineers at the station who had moved in across the street from me, bought it at his garage sale for 20.00, RIP John and thank you.
What a find for $10 and what a lucky client having a classic Gibson. l'm in the UK and garage sales are increasing 😁 l hope l find treasure soon. Lovely restoration job 👍🇺🇸
I have a similiar Gibson (66 LGO) in the same bridge condition, except my finish is severly crackled, In fact, I started watching Jerry's videos because of my Gibson, so I was rivited to this one. These little Gibsons play like butter when you can get the action low enough. What an amazing find!! And what an fantastic restoration!!!
My personal playground (AKA Dollar Tree) sells carpet remnants of various sizes that make great bench covers. Also check their crafts section. All kinda little handy treasures.
Ya know, I've never been in one of those places, including Dollar Store, Family Dollar and Big Lots. I'm always rushing to get what I need and go right past those. I need to change that. ✌🏻🖖🏻
@@zapa1pnt Definitely! All kinda little gems mixed in if you dig around. Dollar Tree though. Not the others. Cheap zip ties good enough for guitar work. Crafts section has cool little stencils. Cheap artist brushes. Glue sticks. Exacto sets. Knockoff brand paimters tape. Velcro strips etc...Dig around. I guarantee you'll leave with all kinda crap you didnt know you needed.
Having been in the piano antique restoration buisness over 40 years one thing I found out people will spend 10 times what something is worth to restore it because it belonged to grandma mother father uncle or aunt or anybody else they were close to.
Amazing grab!! Your client was lucky they didn't Google it, as everyone seems to these days. I was in Chattanooga 15 years back and picked up a dead man's 1977 Yairi DY 78 for 200 bucks. Because they saw "Alvarez" and the internet said they're worth nothing. 😇 And I remained silent. Best guitar I've ever owned.
Always a pleasure to see your work, I am imagining myself having all those tools and knowledge (from watching many of your vid) being able to do a bit of this. Thanks for sharing.
A friend of mine would let me play his Gibson this exact size. It sounded good. I admit I've owned just 4 Gibsons amongst other brands that play very well too for what they are. I have been looking for a deal like this for my granddaughter who loves to play. Definitely worth the parts and labor plus the $10.00. lol. Great repair Job Sir.
People always are asking me: Why are you so lucky in finding these hidden gems. But people, believe: You have to go 50 times before you get what you're looking for regarding guitars. And a lot of knowledge certainly helps!
Wow thanks. that brought back memories back on the farm with uncles on guitar. It wasn't my favorite song to play. But crowds loved it. Johnny cash has song Dirty Old egg sucking dog. Quite a funny story behind that one with uncles playing and my dad howling like a wolf. You made me laugh today. Thank you. Cindy. ❤😅😅😊God bless you.
Man I wish I could be your apprentice, your years of experience show through how effortlessly you seem to make it look, good job sir and keep up the good work!
Thanks for sharing that. I like to repair and mod my guitars, so I'm always on the lookout for any tips on techniques for that. I like your razor blade on the fretboard technique, lol. Nothing else was new to me. Looks good! I'm always on the lookout for a cheap treasure that's been neglected or discarded. Haven't run across any yet, though.... 👌👍
I have one just like that. It was my first guitar when I was 7 years old and that poor thing went through a lot. I am now 59 I still have it and I take it out sometime and remember every scratch and ding that's on it. I like the small neck easy to play. good job on the refinish.
Nice. I've only repaired about twenty guitars, since my main business is violin family, so I appreciate your expertise. I also envy the (relatively) good access you have through the soundhole. The f-holes of a violin are not quite so spacious.... Thanks again. Cheers from windy Vienna, Scott
Thank you for also explaining what you won't do. I was waiting to comment and ask whether it was worth it to fill those extra holes and sure enough you answered it as you went.
I was given a Jose Ramirez 1A classical guitar at the age of 13. I learned to play guitar with it and went electric with a Gibson Les Paul in 1976. Not knowing what the Ramirez was worth, I sold it at my moving sale in 1996 for $25 with the case. I think it is worth thousands now.
I have a Del Rey guitar about the same size as that Gibson and same age, they were sold at K Mart stores in the past. It needs work like that Gibson new nylon strings and the top of the guitar kind of bow, it's a sunburst with a walnut neck it has a stainless steel neck. Made in Japan. My friend that an antique dealer got it at a local auction.
Pretty great guitar after all of that work was done. My first acoustic was one like that, but didn't have the tobacco-burst finish and originally had an adjustable rosewood saddle in a rosewood bridge. I still have it, but since it is a real Gibson, the headstock is broken off at the moment. I just remember it was not a very loud guitar, but did have an incredibly edible tone. Congrats to your customer - I think he might have a keeper.
I am a jeweler for over 40 years. I love watching other craftsman do their skill and tricks on guitars. I just bought my first real git Tar 🤪 and wanna build my first one now. Cheers.
Snap-On tool ,I think, has this gadget that you can get for your fingers to turn a socket and I believe it rachets. Good for tight upside down enclosed places. Best regards, Gio.
Use Butter Paper or OHT sheet or transparent plastic sheet for marking the outline of pick guard from the next time - just a humble suggestion. All the Best!
Hello and thanks for the high quality video of yours. When i deal with holes that my tools dont fit, when working with motorcycles in a shop i prefer to grind the tool and not the customers parts. Thanks again
The next time you’re at a auto parts, or hardware store, see if they have one of those knurled things that fit 1/4” sockets. It’s very handy for things like that.
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
Why can’t I ever find a killer old Gibson guitar at a garage sale!?!? What a find!
You beat me to to it
Gibson plastic shitbox
@@walkertongdee maybe you missed the fact the rest of the guitar is wood.
@@walkertongdee: But as you have seen, you don't need to retain the plastic.
Jerry has, now, made it a good sounding guitar.
@Bryan: Be sure to get there Early.
Those guitars really come alive when you replace the plastic bridge on them.
A friend went to a estate sale in the late '80's and purchased a tweed Fender Deluxe amp for a $1.90 bid, they didn't have any change left so it was 2 bucks. The auctioneer said, "Who'll give me a dollar for this old radio ? ". After I told him what it was worth, $700 at the time. he took his wife to all the auctions.
There’s nothing like watching a man work that, loves what he’s doing.
I had a friend here in Albuquerque that built beautiful guitars, he played with George Jones in the late 50s then ended up here, I told him I’d like a classical guitar,electric and thin. It came out so comfortable to play and played like a dream. His name was Jerry Starr. He and Donny Young changed their names while in New York to play the Jimmy Dean show, oh by the way, Donny Young changed his name to JOHNNY PAYCHECK.
I always say "Why don't I ever find deals like this?!" Then I realize I never go to garage sales....so there's that. Great work, Jerry!
Gibson plastic shitbox
I thought the same thing. 🤣
You gotta go to a whole lot of garage sales and wade through a whole lot of junk to bag a find like that. And maybe never find a treasure like that.
I bought a 59 Les Paul in its original case owned by Jack Cassidy at a garage sale yesterday for 39 cents…..and she threw in a Sunn coliseum stack owned by Leslie west…. free.
The lady who helped me was Morgan Fairchild….yeah…that’s the ticket…Morgan Fairchild.
one way to do this is to buy the guitar used in your 20's and still have it in your 70's. Oh,,,,,, that's me!
Jerry once again spins his Lazarus magic on an old instrument. He never ceases to amaze me.
I can’t believe Gibson used a plastic bridge. Always great to see you do your magic
Gibson plastic shitbox
@@Zero_Ego Sadly, it appears that Gibson (and several othe "big name" guitar factories) were quite happy, at certain periods, to cut corners and trade on their name! If an instrument feels and sounds good to you and you feel comfortable with it, that's probably the instrument for you;....irrespective of country of origin and the name on the headstock!!...............Unless youi are only buying it for "investment" purposes!
I had that exact same lg1 and the bridge was wood? Or it always had ro be glued back together fornsome reason?
@@jedhatcher252 the earlier ones had wood bridges. I think in the early 60s is when Gibson started using plastic. The adjustable saddle bridges Gibson used were prone to splitting across the grain. Anyway a good luthier can do a replacement bridge on them and really help them out
Thanks for the idea with the bridge pins. I'll steal that from you.
My singer found a ‘73 Yairi 12string in her apt. dumpster and gave it to me.
Was in wonderful shape. Just needed $350 worth of bridge work, new pins a new nut and set up. Case was trashed but I’ll take what I can get lol
Never know
While helping a friend clean out her house after her husbands passing, I found a Gibson labeled case with a 12yr old J45, excellent condition and a wooden bridge. I can’t believe Gibson used plastic bridges back in the day as I remember looking at Doves and Hummingbirds around the early 60s. I can remember they’re being priced around $275.00. This one was free!
Very educational. Thank you.
Fantastic job !!!!
Another classic repair and what a lucky find for 10 bucks! Nice tone, too!
jerry you are correct . the thinner the glue the stronger the bond wil be .
The bridge on Gibson flattop my father bought me new in 1964 pulled up about 10 years later. Luckily, the luthier my local guitar shop used was smart enough to scrap the horrible plastic bridge and make a walnut one that’s still in place nearly four decades later.
I'll bet it sounded a whole lot better, after that, too.
I can't believe Gibson would stoop so low to put plastic anywhere on there guitars. That was in '64? Wow. It's a good thing you had it changed.
It's just infuriating they put a crappy bridge on those guitars to save a couple bucks.. Likely causing expensive repairs down the road..
Excellent work on the bridge, and great overall. I can’t believe Gibson would do such a thing!
I thought those days of Garage Sale finds like this were long gone🤣
Hey thanks for the video of your work process. I go through a LOT of RUclips videos looking for Luthier work videos but if they don't have the dialogue that goes with the work I don't care much for them. I really enjoy watching the work process thought out aloud if you will :) So thanks for the great video!
Had that been at a Garage sale in my neighborhood, I'd have jumped on it too. Although I can do some basic instrument repair, I likely would have phoned my trusted luthier also. Mr. Rosa is certainly a trusted repair specialist.
I would have loved to have seen the customer’s reaction when seeing his “find” now. Great job on restoration… it is probably in better shape now than it was when new!
B b
No question, it's a better guitar now. When it was new it was "BJ", before Jerry got ahold of it.
I would grind down the outside of the nut driver to make it fit in the pocket. They are usually pretty thick and can stand the loss of metal for a low torque application like that.
Man, $10 for a 1966 Gibson in this day and age. That’s what drives me to yard sales and antique stores. You just never know.
My favorite guitar is a old Silvertone guitar from the 60's. I got it from a lady who retired from being a guitar teacher. (About 30 years ago or so). It had a missing gear, but I paid her $10 and got one from a guitar repair shop. I have had to glue the saddle back on, but it still sounds so good.....an old classical guitar. I have about a dozen guitars, but that is still my favorite. Oldies but goodies.
One of mates is a Luthier he came across a garage sale guitar. Old beat up case (1930s P & O stickers on it) and someone had kindly put a polyurethane finish on it. He gave the guy 500 bucks telling him it was a great guitar once, but he didn't know what else he might find. It was a 1931 Martin OM-18 banjo tuners and all. It took him a long while to restore it as there were cracks and removing the poxy modern finish was a delicate job. But in the end it looked, played and sounded lovely. He sold it for around
$5 000 AUS and figured he made about 2 grand. He later saw it in an exhibition when CF Martin IV was visiting Australia. This Gibson is much more of a rags to riches tale. Well done.
Your client is one lucky guy! You did a fine job restoring that guitar. Best wishes.
I like the song you are playing during the breaks. Very nice vocals.
This whole series is a beautiful souvenir of your fine career for your family's enjoyment and for guitar enthusiasts everywhere for years to come. Good job Jerry Rosa
Amazing job.
Watching you work is like therapy for me, just lose myself in it...
It's about 1:30 in the morning here This little corner of Louisiana. I couldn't sleep so I picked up my phone and I got to tell you I have really enjoyed your company this morning. I've been a novice guitar player for 60 years and I did not know so many things that you just showed about the guitar. Thank you for sharing that information in the manner in which you showed it. God bless you sir and many more years of Lutheran.
Looks pretty dang nice after all the work Jerrry. The pick guard is a perfect match in my eyes. Cheers from Utah.
I live in Willow Springs which is about 1.5 hours from you. Good to know. Love the video.
Absolutely gorgeous work! Thumbs 👍🏻 up video!~John
Beautiful work...fun to watch as always!
I got a 84, fender squire made in Japan, and signed by Robert Cray, and was played on the air live, back and given to on of the engineers at the station who had moved in across the street from me, bought it at his garage sale for 20.00, RIP John and thank you.
What a find for $10 and what a lucky client having a classic Gibson. l'm in the UK and garage sales are increasing 😁 l hope l find treasure soon. Lovely restoration job 👍🇺🇸
I love your videos! Thx so much for sharing your expertise and love for instruments!
Man, I can just sit here and watch one after another of these repair videos. Talk about some tips and tricks, this gentleman has a toolbox full 🙂
I have a similiar Gibson (66 LGO) in the same bridge condition, except my finish is severly crackled, In fact, I started watching Jerry's videos because of my Gibson, so I was rivited to this one. These little Gibsons play like butter when you can get the action low enough. What an amazing find!! And what an fantastic restoration!!!
I got the same guitar. Say it isn't so. Did Jerry retire?
He’s mentioned it
@@cjm3729 which video?
@@gosman949 cant remember
What a wonderful video. Thanks for making that. Good to see a man do work that he's really good at.
The yard sale background music is amazing. Nice job on the guitar, also. Thanks for sharing 👍.
My personal playground (AKA Dollar Tree) sells carpet remnants of various sizes that make great bench covers. Also check their crafts section. All kinda little handy treasures.
Ya know, I've never been in one of those places, including Dollar Store, Family Dollar and Big Lots.
I'm always rushing to get what I need and go right past those. I need to change that. ✌🏻🖖🏻
@@zapa1pnt Definitely! All kinda little gems mixed in if you dig around. Dollar Tree though. Not the others. Cheap zip ties good enough for guitar work. Crafts section has cool little stencils. Cheap artist brushes. Glue sticks. Exacto sets. Knockoff brand paimters tape. Velcro strips etc...Dig around. I guarantee you'll leave with all kinda crap you didnt know you needed.
I really have enjoyed watching your guitar work. Thanks!
Great video. Thanks for sharing the attention to detail for repairing that guitar.
Having been in the piano antique restoration buisness over 40 years one thing I found out people will spend 10 times what something is worth to restore it because it belonged to grandma mother father uncle or aunt or anybody else they were close to.
...and that's just fine. A simple ring passed through generations can be priceless to family members.
Amazing grab!! Your client was lucky they didn't Google it, as everyone seems to these days. I was in Chattanooga 15 years back and picked up a dead man's 1977 Yairi DY 78 for 200 bucks. Because they saw "Alvarez" and the internet said they're worth nothing. 😇 And I remained silent. Best guitar I've ever owned.
Thoroughly enjoyed your restoration of the Gibbo, well done !!
What a lucky find! Nice work!
Absolutely beautiful as is your guitar playing!
A pleasure to watch and informative.
Thanks for sharing your skills.
Really great seeing how you repair guitars.
Always a pleasure to see your work, I am imagining myself having all those tools and knowledge (from watching many of your vid) being able to do a bit of this. Thanks for sharing.
Thoroughly enjoyed watching your video. Thanks for sharing. GBU
fascinating to watch a master at work, reminds me of my father making violins! Thanks so much.
Everything'
s bigger in Texas, even the Garage Sale Deals :D :D
Great video and restoration. Nova Scotia loved it!!!
What a nice find, Nice work Jerry.
What a steal !!! Looks fantastic now, great job !!
So cool watching you work your magic, sir. Great guitars, even with plastic bridges :-)
Beautiful job it turned out amazing
Sounds good...what a pro fixit job!!! Awesome!
I would love to have a 66 like that, my birth year. I have a 1965 Gibson 12 string, but an old 6 string would be Awesome. Great job on this one man.
That guitar turned out real nice! Great Job!
A friend of mine would let me play his Gibson this exact size. It sounded good. I admit I've owned just 4 Gibsons amongst other brands that play very well too for what they are. I have been looking for a deal like this for my granddaughter who loves to play. Definitely worth the parts and labor plus the $10.00. lol. Great repair Job Sir.
Another gem Jerry! I don't know how you do it! Amazes me everytime. And you're a dang good player too! 👍👍🎶🎶🎶🎶🎶😎😎😎😎😎
People always are asking me: Why are you so lucky in finding these hidden gems.
But people, believe: You have to go 50 times before you get what you're looking
for regarding guitars. And a lot of knowledge certainly helps!
Wow thanks. that brought back memories back on the farm with uncles on guitar. It wasn't my favorite song to play. But crowds loved it. Johnny cash has song Dirty Old egg sucking dog. Quite a funny story behind that one with uncles playing and my dad howling like a wolf. You made me laugh today. Thank you. Cindy. ❤😅😅😊God bless you.
Boy the amount of work to even do what seems like a simple fix is always more than you think.
Man I wish I could be your apprentice, your years of experience show through how effortlessly you seem to make it look, good job sir and keep up the good work!
Thanks for sharing that. I like to repair and mod my guitars, so I'm always on the lookout for any tips on techniques for that.
I like your razor blade on the fretboard technique, lol. Nothing else was new to me.
Looks good!
I'm always on the lookout for a cheap treasure that's been neglected or discarded.
Haven't run across any yet, though.... 👌👍
I have one just like that. It was my first guitar when I was 7 years old and that poor thing went through a lot. I am now 59 I still have it and I take it out sometime and remember every scratch and ding that's on it. I like the small neck easy to play. good job on the refinish.
Love your videos!!! Thank you so much!
Nice. I've only repaired about twenty guitars, since my main business is violin family, so I appreciate your expertise. I also envy the (relatively) good access you have through the soundhole. The f-holes of a violin are not quite so spacious....
Thanks again. Cheers from windy Vienna, Scott
Great work Jerry! 👏
Thank you for also explaining what you won't do. I was waiting to comment and ask whether it was worth it to fill those extra holes and sure enough you answered it as you went.
I was given a Jose Ramirez 1A classical guitar at the age of 13. I learned to play guitar with it and went electric with a Gibson Les Paul in 1976. Not knowing what the Ramirez was worth, I sold it at my moving sale in 1996 for $25 with the case. I think it is worth thousands now.
Good job. At first I wasn’t sure about that pick guard but it looks really good.
Great finish, They are gonna love it!
Well, I missed this one! A pleasure, as always! 😁
A top pick up. Nice work, Mate, to bring it back.
I Always enjoy your work.
Wow great job my friend.
I have a Del Rey guitar about the same size as that Gibson and same age, they were sold at K Mart stores in the past. It needs work like that Gibson new nylon strings and the top of the guitar kind of bow, it's a sunburst with a walnut neck it has a stainless steel neck. Made in Japan. My friend that an antique dealer got it at a local auction.
Pretty great guitar after all of that work was done. My first acoustic was one like that, but didn't have the tobacco-burst finish and originally had an adjustable rosewood saddle in a rosewood bridge. I still have it, but since it is a real Gibson, the headstock is broken off at the moment. I just remember it was not a very loud guitar, but did have an incredibly edible tone. Congrats to your customer - I think he might have a keeper.
Awesome job that you done .
Man oh Man, Jerry! You surpassed very easily the Gibson Co. Bravissimo!
thanks it was enlightening watching the repair
I am a jeweler for over 40 years. I love watching other craftsman do their skill and tricks on guitars. I just bought my first real git Tar 🤪 and wanna build my first one now. Cheers.
Wow. I would trust you with my guitar anytime... Enjoyed your restoration.
Snap-On tool ,I think, has this gadget that you can get for your fingers to turn a socket and I believe it rachets. Good for tight upside down enclosed places. Best regards, Gio.
i am not into guitars but i really enjoy watching the expertise.
Use Butter Paper or OHT sheet or transparent plastic sheet for marking the outline of pick guard from the next time - just a humble suggestion. All the Best!
Awesome work as usual
Beautiful guitar after the repair. What a great deal for the owner!
Hello and thanks for the high quality video of yours. When i deal with holes that my tools dont fit, when working with motorcycles in a shop i prefer to grind the tool and not the customers parts. Thanks again
great restoration!!
The next time you’re at a auto parts, or hardware store, see if they have one of those knurled things that fit 1/4” sockets. It’s very handy for things like that.
I like the way the song title dovetails with the project theme.
I would grind down a Chinese socket for the truss rod nut before I got rid of any of the original 5O+ yr old wood
Great work!
You would be a great neighbor.
👍