How To Change Surron Belt The Fastest Way Possible
HTML-код
- Опубликовано: 24 ноя 2024
- Despite the worn down and bent parts this is the fastest way we have discovered to change a belt on a sur ron light bee. If you have any belt parts or worn-down sprockets as shown in the video it’s always best to replace the parts rather than reusing them. If you reuse parts that are not the OEM specs it could be dangerous and could cause premature failure to other supporting parts.
If you want us to make a video about how we set our belt tension and the precautions we take to avoid breaking belts comment below.
======
GritShift is a highly specialized and precisely dedicated place for real extreme dirt junkies, guys, and gals who are looking to spend every single minute of their free time muddy, happy, and off-road. This project originated from Dirt Legal, our sister company, which is dedicated to legalizing off-road vehicles. When they realized that quality parts for dirt bikes and UTVs are very hard to come by, GritShift was born.
Looking for more?! Check us out on:
Website: gritshift.com/
Facebook: / gritshift
IG: / gritshift
As an aside, I see what you were talking about on the phone with that 21 and Talaria forks. Thanks for all of your help!
Heck yeah happy to help.
wish i saw this yesterday! i pulled the whole sway arm off and putting it on was a pain!
Do you remember where the washers go back to? The 2 go between the swingarm and the frame? and the third goes before the jackshaft screw?
@@joem8601 yeah the washers that have the spacer i guess built in. the shaft goes inbetween those. its hard to put it in. but you just press them in not from the outside. outside being where you have your legs but in the inside being in between the tire if that makes sense
I am doing a chain conversion this weekend I am going to do it this way
Hi, thks for the video. FYI much easier/faster if you flip the bike upside down😉
Don't you think that is kind of weird that you have all the expensive upgrade parts but no simple replacement parts like the jackshaft bolt. Crazy!
Hey cameraman what are you doing??? 🙈 I can't see nothing.
Wow, awesome workflow to get this done easier! Can you provide a workflow for changing the jackshaft bearings? As in, how do I get these out and new ones in, without breaking things? Thanks!
We will add to our list of videos that we need to make. Thanks for the feedback
Done, ruclips.net/video/_s_UFMup5pY/видео.html
What milage do you recommend changing the belt? No clue on how long these last at all? And same with the battery/motor
I looked at this vid and said looks easy. Then I realized you don't run a belt/chain guard? How does thie jackshaft come out that easy ?
i can’t get the jack shaft bolt out i’ve been trying for a few hours
What seat do you have on your bike?
Nice trick 🫡
Bro on my life I’ve never seen this video and a week ago I put the stickers on with the gs sticker on the belt cover wow
What size tires on these 21/18 setup?
Hey I was adjusting my chain drive tension and just loosened the motor, after I got the tension right I tightened it back up and noticed a ticking noise, turns out the bolts holding my sprocket on the jackshaft are now rubbing on the side of the frame, how can I fix it? I never touched the jackshaft only loosened and tightened the motor
Id check to make sure the bolts holding the sprocket are not loose. Also if you have bad bearings in your Jackshaft (Really bad bearings) it could be causing your jackshaft to sit at an angle causing it to hit.
does this technique work on the ultra bee? 😊
id assume so
Is there a way that you can mount a ktm freeride seat on a surron with a 72v battery ?
Most probably, or either add a MX style seat with the Seat Extenders for the Surron. 👍🏻
Bro sped up the most important part
What do you mean
Im so mad right now, i found this video after I took off my swing arm 💀
Someone get these guys some real tools, Allan keys are for ikea sets and bicycles.
In our experience most of our customers don't have all the big fancy tools "some do yes" but most just have basic tools. So logically to us it makes since to show how this is done using standard tools that just about anyone would have. And those that have the nice electric impacts and Allen sockets would be able to completely understand the operations performed in this video. Trust me I much rather have used something a little more efficient, but going back to the basics would serve anyone watching.
If you value not having pain in your hands when ur old. I recommend not using ur hand like a hammer like he does. Yikes.
lost me at the man-bun
Lol I’ll wear a hat next time
@@gritshift hell naw. Long hair is natty, fuk the haters🤙🏽 shoutout to the flow.
I'm bald