When I was putting in the timbers for the grape arbor (8' post, 4' deep) I considered renting an auger for the job, but finally decided to just go with the manual post hole diggers that I already had. I was digging in sand, which made the task a lot easier (and that is ALSO why I went 4' deep!) If I had hit clay early on, I think I would have gone ahead and gotten the auger! It IS one of those tools that a person isn't going to need on a regular basis - and would make a good candidate for a church or community center tool lending program. I really like the rear access feature of that mailbox .. put some stepping stones or pavers in, and Grandma Carol can collect her mail in house slippers 😊
Tim that auger would be GREAT for ICE FISHING hahaha REALLY love to go ice fishing !!! Got my own post hole digger since 1973 got it at a garage sale it was a buy for me !!! Have done my share of posts for mail boxes up North in Wisconsin used to have to redo it every yr. SNOW TRUCK Would take it out for me and then the teenagers did it also but got WISE TO THEM 4 inch metal pipe complete filled with cement and cement on down that took care of the first snow truck when it came through haha !!!
Hey Tim, thanks for posting the video on the 63CC earth auger. I actually have the same one that has been sitting in the shed (boxed) for three years. Just took it out today to use it--and like you--found the manual to be crap--not to mention-for an obviously different auger. Your review was great, but there was one omission that still has me scratching my head. You said your unit came with gear oil in the transmission--which made me feel better as I'd be damned if I couldn't find a drain or a fill hole to add oil or drain it. If you in fact were able to find one I'd be grateful if you could share that info with me. I'm sure others with this machine would appreciate it as well. Actually there is one other question, where do your find augers and extensions that fit this machine. I have a 12 and a 6-inch auger as well as a 24-inch extension, but after watching your video (I'm planning a pergola and would need to drill 12 inch holes for the post foundations) would like to avoid drilling 15-inch holes when I only need 12 inches. Thanks in advance for any advice you can give. Cheers, Tom
I just took my tank off to replace the fuel lines and a nut popped out of nowhere. I can't for the life of me figure out where it came from. The bolts that hold the tanks fit through the nut but I still can't figure out if it was on one of them or not. It doesn't seem like it's needed but it came from somewhere.
Yes. It wasn’t a hole digging instructional. It was an unboxing, setup and first use review. Did you read the video description? Thanks for your feedback.
Wow!!! That 12" auger looked like a leg amputation looking to happen. Glad you are still standing on two stilts Tim! - Rick
It was a beast for sure! May be good for ice fishing but I think I will stick with the 8" for most jobs!
@@RidgeLife Maybe start without the extension, and then connect it once you've gone down 2 feet.
Good job Tim. Thanks for the mailbox!
Thx!
That log home is beautiful ♥️♥️‼️‼️nice mailbox ♥️♥️‼️‼️
Thanks Cathy.
When I was putting in the timbers for the grape arbor (8' post, 4' deep) I considered renting an auger for the job, but finally decided to just go with the manual post hole diggers that I already had. I was digging in sand, which made the task a lot easier (and that is ALSO why I went 4' deep!) If I had hit clay early on, I think I would have gone ahead and gotten the auger!
It IS one of those tools that a person isn't going to need on a regular basis - and would make a good candidate for a church or community center tool lending program.
I really like the rear access feature of that mailbox .. put some stepping stones or pavers in, and Grandma Carol can collect her mail in house slippers 😊
Great idea! I need to clean out that ditch and get rip rap and that will really help! tHX
Tim, your house looks fantastic. Job well done.
Thank you sir!
@@RidgeLife You are very welcome.
Tim that auger would be GREAT for ICE FISHING hahaha REALLY love to go ice fishing !!! Got my own post hole digger since 1973 got it at a garage sale it was a buy for me !!! Have done my share of posts for mail boxes up North in Wisconsin used to have to redo it every yr. SNOW TRUCK Would take it out for me and then the teenagers did it also but got WISE TO THEM 4 inch metal pipe complete filled with cement and cement on down that took care of the first snow truck when it came through haha !!!
Oh yeah! Tnc
Good morning Tim ☀️. Nice video and very informative 👍. Have a wonderful day and blessings 💞
Thanks Mary!
Good job Tim. I really like that box.👍🏻😎
Thx!
Nice mailbox! That auger made the job a lot easier! Good job TIm.
Thanks Jeanie!
Hi Tim
I just love those windows
Thank you!
Your cabin looks amazing! And great job on the mailbox! 😊👍
Thanks so much! 😊
Nice job Tim. That's the same auger I've been looking at for awhile. I'm feeling a lot more confident about ordering it now.
Worked for me! Not sure how long yet but looked fine. Thx!
I need to get me a auger soon liking that 12" C'mon!!!
You know it! You can borrow mine for sure!
Great review and nice job on your mailbox! 😉
Thanks Barb!
Totally Cool!
Thx!
I keep trying to get Kenny to get us an auger…I think he’s holding out for a tractor with attachment 😉 Nice review Tim 👍
Those are nice too!
That worked quite well.I pray that USA can recover our "Made in USA " manufacturing.I'm no longer buying Chinese production items Peace from MN
Yeah, it pains me too but for something I won’t use too often and hard to find USA made and owned, I do it but try to buy American where I can.
Hey Tim, thanks for posting the video on the 63CC earth auger. I actually have the same one that has been sitting in the shed (boxed) for three years. Just took it out today to use it--and like you--found the manual to be crap--not to mention-for an obviously different auger. Your review was great, but there was one omission that still has me scratching my head. You said your unit came with gear oil in the transmission--which made me feel better as I'd be damned if I couldn't find a drain or a fill hole to add oil or drain it. If you in fact were able to find one I'd be grateful if you could share that info with me. I'm sure others with this machine would appreciate it as well. Actually there is one other question, where do your find augers and extensions that fit this machine. I have a 12 and a 6-inch auger as well as a 24-inch extension, but after watching your video (I'm planning a pergola and would need to drill 12 inch holes for the post foundations) would like to avoid drilling 15-inch holes when I only need 12 inches. Thanks in advance for any advice you can give. Cheers, Tom
Mine came filled and sealed no drain. I bought the bits with the auger as a kit. Thanks!
Thanks Tim, nice to know. I was thinking I must have been missing something.@@RidgeLife
I got a stihl but I sure wish auger was bigger…12” wow
Yeah, that's crazy big!
😆 Enjoyed
Glad you enjoyed!
I wonder how well it does in what I call "normal" soil, i.e. rocks and roots. Never fails, anytime I am digging a hole, there are rocks and roots.
Ha! Yeah, I bet it would struggle like most Butt since this is a big motor, it would spin ya if stuck!
Is it hold the mail 😂👍
Oh yeah!
I just took my tank off to replace the fuel lines and a nut popped out of nowhere. I can't for the life of me figure out where it came from. The bolts that hold the tanks fit through the nut but I still can't figure out if it was on one of them or not. It doesn't seem like it's needed but it came from somewhere.
Oh no! Sorry.I feel ya!
I just put water in the hole and pour the pre mix in and take the pole and mix it a lot less work .
Yeah a lot of people do that. If I only have a couple and a real high load, I like to ensure it’s mixed well.
I don't an auger would work here way too many rocks...Have a Blessed day
Yeah, rocks may be an issue!
So your 20 minute review consists of just one dug hole basically??
Yes. It wasn’t a hole digging instructional. It was an unboxing, setup and first use review. Did you read the video description? Thanks for your feedback.