@@autopurlieuHow do you do that? I had 1 key that came with my LR3. I bought 2 new ones from ebay and had them cut but I did the programming with my Autel scanner. At first it was successful in learning the new keys and all 3 keys were starting the vehicle but none of the fobs buttons worked. Then I tried to redo the process again but this time the original key and first new key were disabled but the second new key was and still is working but not the buttons. I tried doing the whole process again and again the original key and first new key were still disabled but second new key was still working and this time it gave me a prompt to leave car running for at least 6 minutes to continue with programming. I waited more than 6 minutes, and completed programming but still key fob buttons didn’t work. Now I have 3 key fobs that all open the door and unlock the steering column but only 1 that actually starts the vehicle but the buttons dont work. I would just like to get at least 1 that can lock and unlock the doors remotely.
you need two things, one. learn to use the Autel, second - buy a new engine as you've fucked that one continually starting and stopping it like that won't have given oil pressure
I saw you in Aloysians RUclipsrs group we have same nitch and work it's great done all
You briefly mention lubricating the ignition,do you use like a fine graphite powder like you do for house locks?
I use , Houdini
@@autopurlieu thanks.:-)
good luck with your work 👍👍👍
Thank you for your support
Is it possible to make the same procedure with Launch 919 with that car?
Not with launch
@@autopurlieu launch not working with land rover?
@@MishaTIGWmimoauto not with 919, you could try if you like
Thank you sir from India
Nice, I really need opportunities to practice this.
I just got lucky this comes along. You will too
Hi sir , thanks for sharing. Do you provide training?
Thank you for your support .
Unfortunately, I don’t.
I programmed a new key but the buttons didn’t work do they need to programmed separately?
Yes, program it separately like bmw fobs
@@autopurlieuHow do you do that? I had 1 key that came with my LR3. I bought 2 new ones from ebay and had them cut but I did the programming with my Autel scanner. At first it was successful in learning the new keys and all 3 keys were starting the vehicle but none of the fobs buttons worked. Then I tried to redo the process again but this time the original key and first new key were disabled but the second new key was and still is working but not the buttons. I tried doing the whole process again and again the original key and first new key were still disabled but second new key was still working and this time it gave me a prompt to leave car running for at least 6 minutes to continue with programming. I waited more than 6 minutes, and completed programming but still key fob buttons didn’t work. Now I have 3 key fobs that all open the door and unlock the steering column but only 1 that actually starts the vehicle but the buttons dont work. I would just like to get at least 1 that can lock and unlock the doors remotely.
@@DanielLopez-gk2wb what kind type of blade does the key has?
@@autopurlieu Its the one that gets narrow at the tip. Not the one that is straight.
@@DanielLopez-gk2wb hu101 or hu92?
Also, I don’t buy eBay key fobs. That could be the problem too
As always, great one!
Thankx brother
you need two things, one. learn to use the Autel, second - buy a new engine as you've fucked that one continually starting and stopping it like that won't have given oil pressure
That’s part of the process.
It’s like you haven’t started your car before lol
Holy smokes your intro in freakin' loud.
Did it wake you up 😂