It's truly amazing what can be built out of spare parts and discarded bits. This is quite unique. Now for the important question. How many people are wanting a cargo bike like yours?
This particular kind of cargo bike is pretty popular around my town (the steering linkage on this one is much better than what they typically use, too most of them use a pair of cables similar to what the brakes use) So I'd say quite a few folks want them. I've ridden one once, and they do take a little bit to get used to steering since the front wheel is so far forward. You get used to it, though.
Está vida así es lo que muchos tiran a la basura otros lo recogen y lo arreglan y ponen en función muchas felicidades eres un genio saludos desde Costa Rica
It is designs of perseverance that pays off after numerous times of determination to succeed. Continuity is the answer in making countless awes and healthy innovations.
Que bueno su trabajo, mucho talento, usa materiales reciclados creando una herramienta de trabajo, lo felicito. Felicidades, que este muy bien!!!!! Saludos.
Dear brother, thank you bro that you have done all the years is out standing project. I learned a lot intact. Now how to set up simple tig machine for ms welding along with gas(co2 & argon),because I am straggling with it.
I made a front wheel drive one from a regular MTB, a suspension bike and an old metal table frame. I can have it as a bike or trike simply by swapping rears at the pivot point.
I like the craftsmanship you put into your projects, including this bike. But, because of how far forward the front fork is positioned on the bike, it probably is a bit harder to maneuver compared to an ordinary bike. Add some cargo weight, and may it be even more difficult, especially if the cargo is top heavy. Obviously, you have to know the limits of the bike when deciding what cargo load to put on it. Nonetheless, it's a beautiful project. Keep up the good work!
well i too have one that was built by a bloke that knows what he was doing and i can tell you that it handles like a pig at low speeds, yes it will take a 150kg load but the frame starts to flex, the bike is more suited to straight lines, if you try to sharp corner, forget it !! and yes mine has a hub motor on it to help move the bike, without it i would have throw the thing in the bin years ago !!!
Hi ... very cool job ... Note: The left brake pedal is for the buck wheel ... as it is famous. Thank you . 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
@@KwandoTechnic I do notice that you did not install a Brake Noodle for the front linear pull brake. I am not certain how well your setup without it will work. Perhaps with the long housing it will fine. The rear brakes appear to be old Suntour SE (self energizing). Those are a great brake for a long and heavy bicycle. Enjoy riding your creation.
Well done! It's just nice to watch how everything comes to life in your hands. I respect such people! I have been subscribed to your channel for a long time and always get ideas for myself. Be healthy and have more new ideas.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Cool Klasse Arbeit 👍👍👍👍👍👌
Thank you so much!
Perfect for carrying my fishing gear on my way to the water. Excellent job 👏👍👌
Thank you so much!
Very good work Thank you for your video
Welcome!
Awesome work yet again 😎👍💵🤜🤛💥
Great job 👏 👍
Thanks!
I did enjoy watching. gloves & shoes for the safety,
Thank you so much!
ششششش
Just a fantastic demo and sheer brilliance. Keep it up.
Thank you so much!
Just brilliant, well done that Man.
Thank you so much!
Excellent thambi.please do more and more.
Many thanks for your support!
Mantap. Boos. Thebest. Slamat. Chukcest
Thanks!
It's truly amazing what can be built out of spare parts and discarded bits. This is quite unique.
Now for the important question. How many people are wanting a cargo bike like yours?
I tink it better for myself and someone. That's all. Thank you so much!
This particular kind of cargo bike is pretty popular around my town (the steering linkage on this one is much better than what they typically use, too most of them use a pair of cables similar to what the brakes use) So I'd say quite a few folks want them. I've ridden one once, and they do take a little bit to get used to steering since the front wheel is so far forward. You get used to it, though.
Tô só curtindo a sua bike 😁😁😁 nota 10 👏👏👏👏👏
Thank you so much!
Amazing job...!!!
Thank you!
Good idea ❤
Thanks!
Beautiful tech 👏from Guddappa kayakada bsnl DAVANAGERE smart city karnataka
Thank you!
REALY, VERY NICE WORK.. EXCELLENT....
Thank you so much!
Unbelievable, doing all this free-hand and without a gauge. Master welder! Highest respect for this craftsmanship!
Thank you so much!
Está vida así es lo que muchos tiran a la basura otros lo recogen y lo arreglan y ponen en función muchas felicidades eres un genio saludos desde Costa Rica
Thank you so much!
Super బ్రదర్ 👌👌👌👌
Thank you!
CREATIVE VERY NICE
Thank you!
Wow... You make welding seems so easy... Love your work😂... Semangat... Cheerss🎉😅
It is designs of perseverance that pays off after numerous times of determination to succeed. Continuity is the answer in making countless awes and healthy innovations.
Awesome work. If I get time to build it, I'd probably make it a tricycle and electric assisted. Thank you for sharing your knowledge with us.
You’re welcome!
Top!
Excelente!
Parabéns guerreiro!!!
Thank you!
Just needs to be converted to electric now, job done..!! You are one very clever little bugger my friend..!!
I converted it in near video. Please enjoy it. Thanks!
Que agradable ver un video sin que estén pidiendo insistentemente dame tu like y/o suscribete.
Thank you so much!
Beautiful job on the bike. Nice work!
Thank you so much!
nice job
Thanks!
Thanks very helpful video 👍👌
You are welcome!
I don't have use for a bike like that, but I would be proud to ride it around the town. Nice video. Thank you.
Thank you so much!
Caprichou heim ❓👍👍👍👍
Good modification, very usefull. Thank you for sharing your idea my friend.
You are welcome!
@@KwandoTechnic d/d$
nice build
Thanks!
It's truly amazing what can be built out of spare parts and discarded bits. This is quite unique.
Wow well good videos netx time videos👍
Thank you so much!
Good job
Thank you!
Wow, te quedó muy bien el proyecto.
Thanks!
Que bueno su trabajo, mucho talento, usa materiales reciclados creando una herramienta de trabajo, lo felicito. Felicidades, que este muy bien!!!!!
Saludos.
Thank you so much!
Parabéns pela criatividade e inteligência sua e que Deus possa continuar abençoando você e toda família ficou muito bonito o seu trabalho
Thank you so much!!!
Intrested
Can you make for me one pls!??
Mr Ali from CHENNI,India
Sorry, I don't sell.
I ask can you make for me one pls???
Show. Muito top, ficou ótimo. E muito prático MESMO. Parabéns 👏
Thank you so much!
കൊള്ളാം , മിടുക്കൻ ! ഏതൊരു സാധാരണക്കാരനും ഒരു ലോഡ് സൈക്കിൾ ഇങ്ങനെ ഉണ്ടാക്കാം !
Thanks!
O no
Felicitaciones muy lindo trabajo.. saludos
Thank you so much!
Thank you! Useful project!
Thanh you so much!
@@KwandoTechnic 5e
No jig.
Amazing
Thank you so much!
Ти механік від Бога!
Красиво зробив!
👍👍👍
Thank you so much!
NIce build! I like how you used "used parts"!
Thank you so much!
Excellent work. What machine or welding technique do you use?
You can see it at here: bit.ly/30T55h0
Very cool. 😎😎😎
Many thanks!
smart master. good idea..
Thank you so much!
Pretty cleaver fellow
Thanks!
😲 very nice build 👏👏
Thanks!
Dil jeet liya mubarak❤️❤️❤️👍👍
Thanks!
Супер❤❤❤❤❤❤
Trabalho perfeito! Parabéns! Nota 10!
Many thanks!
Dear brother, thank you bro that you have done all the years is out standing project. I learned a lot intact. Now how to set up simple tig machine for ms welding along with gas(co2 & argon),because I am straggling with it.
Nices good job bro its amazing from philippines
Thank you so much!
I made a front wheel drive one from a regular MTB, a suspension bike and an old metal table frame. I can have it as a bike or trike simply by swapping rears at the pivot point.
عمل رائع جدا يستحق التنويه .
Thank you so much! Keep support me!!!
👍👍👍💪
That's so great
Thanks for sharing I'll try it and show my results in my channel
I like the craftsmanship you put into your projects, including this bike. But, because of how far forward the front fork is positioned on the bike, it probably is a bit harder to maneuver compared to an ordinary bike. Add some cargo weight, and may it be even more difficult, especially if the cargo is top heavy. Obviously, you have to know the limits of the bike when deciding what cargo load to put on it. Nonetheless, it's a beautiful project. Keep up the good work!
Thank you so much! But actually, it is not difficult as you thought. I developed electric engine for it in recent.
😂🤑🤑🤑
well i too have one that was built by a bloke that knows what he was doing and i can tell you that it handles like a pig at low speeds, yes it will take a 150kg load but the frame starts to flex, the bike is more suited to straight lines, if you try to sharp corner, forget it !! and yes mine has a hub motor on it to help move the bike, without it i would have throw the thing in the bin years ago !!!
Good job
👍
Thanks!
Next time add a full chain case for longer chain & sprockets life & better aesthetic.
Many thanks for your suggestions!
Thank you for vidio sirr, godd ide
Thank you so much!
Parabéns pelo seu vídeo 🏆🥇
Many thanks!
Very nice. well done. What kind of welder is that?
I use TIG welder as: bit.ly/30T55h0
Bhai app konsa wilding machine use karteho unboxing kardo
Go market.
So much work, and the bike cannot steer to right :) I don't understand these restorations, when it is useless.... Oh I see, the views...
Bravo, géniale transformation
Thank you so much!
Amazing video! KEEP UP UP
Thank you so much!
Que coisa boa tansfoma uma bicicleta grande
Thank you!
ممتازز جدا 👏👏👏👍👍👍✔✔✔
Thank you so much!
Viri viri good...
Thank you!
Hi ... very cool job ... Note: The left brake pedal is for the buck wheel ... as it is famous. Thank you .
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Thank you so much!
On a motorcycle you would be correct, many bicycles are setup right brake lever to rear brakes.
@@jamesalexander7540 I have both brake for front and rear.
@@KwandoTechnic I do notice that you did not install a Brake Noodle for the front linear pull brake. I am not certain how well your setup without it will work. Perhaps with the long housing it will fine.
The rear brakes appear to be old Suntour SE (self energizing). Those are a great brake for a long and heavy bicycle.
Enjoy riding your creation.
@@jamesalexander7540 many thanks for your suggestions. Regards!
JÁ NÃO PERDE TEMPO NA RUA PRA FZER COMPRAS , FICOU ÓTIMA, ABRAÇOS
Thank you!
Ò9m
Wonderful work very good idea,congratulations.
Many thanks! Keep support me!
Seria mejor si fuera eléctrico. Buen trabajo! 👍🏻
Many thanks for your suggestions!
Hi mister beautiful work well done
Thank you so much!
Bonjour. Super ! Peut-être pourriez-vous ajouter un dérailleur ? Cordialement.
Many thanks for your opinions!
Chiếc xe đạp đẹp quá
Thanks!
Muy buen trabajo. Lo voy a replicar, ✌️😎🇲🇽
Good jobs
Thank you so much!
@@KwandoTechnic greetings from new friends
Good thing he was wearing a mask. That old bike probably had Covid19. The finished bike had a turn radius of 18 feet.
Sorry about this.
Muito Obrigado "amigo", valeu a dica. Tenho as ferramentas e as bikes, vou tentar fazer. Ficou Top. Forte Abraço.
Thank you so much!
show de bola , fiquei interessado na maquininha de solda, passa o nome dela e onde comprar, obrigado
You can see it at here: bit.ly/30T55h0
Genius,absolutely brilliant.well done and well worth watching.loved it so much.thank you.
Thank you so much!
ccc
c
Which type of rods or pipe used and what is diameter
Do you means filler rods?
EXCELLENT. NICE JOB.
Thank you so much!
very nice excellent
Many thanks!
Well done! It's just nice to watch how everything comes to life in your hands. I respect such people! I have been subscribed to your channel for a long time and always get ideas for myself. Be healthy and have more new ideas.
Thank you so much! Keep support me! Respect!
0u
You are talent.
Thank you so much!
Que facil que sacan los repuestos oxidados......hasta el plato que va a presión con los tornillos salen con la mano...🤣🤣🤣
You can make it easy if you know it.
Bravo 🤠
Many thanks!
very good work well done
Thank you!
Золотые руки ! Приятно смотреть.
Thank you so much!
What tig welder are you using, and I don't hear any shield gas flowing. Very impressive fab up
Yes, I removed noise.
I like it
Thanks
amazing upcycle
Thank you!
What welding machine are you using, exact model so i can see the specs. Thank you.
You can refer this one: bit.ly/30T55h0